1133 lines
		
	
	
	
		
			26 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
		
		
			
		
	
	
			1133 lines
		
	
	
	
		
			26 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
|   | /*
 | ||
|  |  * CAN driver for esd CAN-USB/2 | ||
|  |  * | ||
|  |  * Copyright (C) 2010 Matthias Fuchs <matthias.fuchs@esd.eu>, esd gmbh | ||
|  |  * | ||
|  |  * This program is free software; you can redistribute it and/or modify it | ||
|  |  * under the terms of the GNU General Public License as published | ||
|  |  * by the Free Software Foundation; version 2 of the License. | ||
|  |  * | ||
|  |  * This program is distributed in the hope that it will be useful, but | ||
|  |  * WITHOUT ANY WARRANTY; without even the implied warranty of | ||
|  |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | ||
|  |  * General Public License for more details. | ||
|  |  * | ||
|  |  * You should have received a copy of the GNU General Public License along | ||
|  |  * with this program; if not, write to the Free Software Foundation, Inc., | ||
|  |  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. | ||
|  |  */ | ||
|  | #include <linux/init.h>
 | ||
|  | #include <linux/signal.h>
 | ||
|  | #include <linux/slab.h>
 | ||
|  | #include <linux/module.h>
 | ||
|  | #include <linux/netdevice.h>
 | ||
|  | #include <linux/usb.h>
 | ||
|  | 
 | ||
|  | #include <linux/can.h>
 | ||
|  | #include <linux/can/dev.h>
 | ||
|  | #include <linux/can/error.h>
 | ||
|  | 
 | ||
|  | MODULE_AUTHOR("Matthias Fuchs <matthias.fuchs@esd.eu>"); | ||
|  | MODULE_DESCRIPTION("CAN driver for esd CAN-USB/2 interfaces"); | ||
|  | MODULE_LICENSE("GPL v2"); | ||
|  | 
 | ||
|  | /* Define these values to match your devices */ | ||
|  | #define USB_ESDGMBH_VENDOR_ID	0x0ab4
 | ||
|  | #define USB_CANUSB2_PRODUCT_ID	0x0010
 | ||
|  | 
 | ||
|  | #define ESD_USB2_CAN_CLOCK	60000000
 | ||
|  | #define ESD_USB2_MAX_NETS	2
 | ||
|  | 
 | ||
|  | /* USB2 commands */ | ||
|  | #define CMD_VERSION		1 /* also used for VERSION_REPLY */
 | ||
|  | #define CMD_CAN_RX		2 /* device to host only */
 | ||
|  | #define CMD_CAN_TX		3 /* also used for TX_DONE */
 | ||
|  | #define CMD_SETBAUD		4 /* also used for SETBAUD_REPLY */
 | ||
|  | #define CMD_TS			5 /* also used for TS_REPLY */
 | ||
|  | #define CMD_IDADD		6 /* also used for IDADD_REPLY */
 | ||
|  | 
 | ||
|  | /* esd CAN message flags - dlc field */ | ||
|  | #define ESD_RTR			0x10
 | ||
|  | 
 | ||
|  | /* esd CAN message flags - id field */ | ||
|  | #define ESD_EXTID		0x20000000
 | ||
|  | #define ESD_EVENT		0x40000000
 | ||
|  | #define ESD_IDMASK		0x1fffffff
 | ||
|  | 
 | ||
|  | /* esd CAN event ids used by this driver */ | ||
|  | #define ESD_EV_CAN_ERROR_EXT	2
 | ||
|  | 
 | ||
|  | /* baudrate message flags */ | ||
|  | #define ESD_USB2_UBR		0x80000000
 | ||
|  | #define ESD_USB2_LOM		0x40000000
 | ||
|  | #define ESD_USB2_NO_BAUDRATE	0x7fffffff
 | ||
|  | #define ESD_USB2_TSEG1_MIN	1
 | ||
|  | #define ESD_USB2_TSEG1_MAX	16
 | ||
|  | #define ESD_USB2_TSEG1_SHIFT	16
 | ||
|  | #define ESD_USB2_TSEG2_MIN	1
 | ||
|  | #define ESD_USB2_TSEG2_MAX	8
 | ||
|  | #define ESD_USB2_TSEG2_SHIFT	20
 | ||
|  | #define ESD_USB2_SJW_MAX	4
 | ||
|  | #define ESD_USB2_SJW_SHIFT	14
 | ||
|  | #define ESD_USB2_BRP_MIN	1
 | ||
|  | #define ESD_USB2_BRP_MAX	1024
 | ||
|  | #define ESD_USB2_BRP_INC	1
 | ||
|  | #define ESD_USB2_3_SAMPLES	0x00800000
 | ||
|  | 
 | ||
|  | /* esd IDADD message */ | ||
|  | #define ESD_ID_ENABLE		0x80
 | ||
|  | #define ESD_MAX_ID_SEGMENT	64
 | ||
|  | 
 | ||
|  | /* SJA1000 ECC register (emulated by usb2 firmware) */ | ||
|  | #define SJA1000_ECC_SEG		0x1F
 | ||
|  | #define SJA1000_ECC_DIR		0x20
 | ||
|  | #define SJA1000_ECC_ERR		0x06
 | ||
|  | #define SJA1000_ECC_BIT		0x00
 | ||
|  | #define SJA1000_ECC_FORM	0x40
 | ||
|  | #define SJA1000_ECC_STUFF	0x80
 | ||
|  | #define SJA1000_ECC_MASK	0xc0
 | ||
|  | 
 | ||
|  | /* esd bus state event codes */ | ||
|  | #define ESD_BUSSTATE_MASK	0xc0
 | ||
|  | #define ESD_BUSSTATE_WARN	0x40
 | ||
|  | #define ESD_BUSSTATE_ERRPASSIVE	0x80
 | ||
|  | #define ESD_BUSSTATE_BUSOFF	0xc0
 | ||
|  | 
 | ||
|  | #define RX_BUFFER_SIZE		1024
 | ||
|  | #define MAX_RX_URBS		4
 | ||
|  | #define MAX_TX_URBS		16 /* must be power of 2 */
 | ||
|  | 
 | ||
|  | struct header_msg { | ||
|  | 	u8 len; /* len is always the total message length in 32bit words */ | ||
|  | 	u8 cmd; | ||
|  | 	u8 rsvd[2]; | ||
|  | }; | ||
|  | 
 | ||
|  | struct version_msg { | ||
|  | 	u8 len; | ||
|  | 	u8 cmd; | ||
|  | 	u8 rsvd; | ||
|  | 	u8 flags; | ||
|  | 	__le32 drv_version; | ||
|  | }; | ||
|  | 
 | ||
|  | struct version_reply_msg { | ||
|  | 	u8 len; | ||
|  | 	u8 cmd; | ||
|  | 	u8 nets; | ||
|  | 	u8 features; | ||
|  | 	__le32 version; | ||
|  | 	u8 name[16]; | ||
|  | 	__le32 rsvd; | ||
|  | 	__le32 ts; | ||
|  | }; | ||
|  | 
 | ||
|  | struct rx_msg { | ||
|  | 	u8 len; | ||
|  | 	u8 cmd; | ||
|  | 	u8 net; | ||
|  | 	u8 dlc; | ||
|  | 	__le32 ts; | ||
|  | 	__le32 id; /* upper 3 bits contain flags */ | ||
|  | 	u8 data[8]; | ||
|  | }; | ||
|  | 
 | ||
|  | struct tx_msg { | ||
|  | 	u8 len; | ||
|  | 	u8 cmd; | ||
|  | 	u8 net; | ||
|  | 	u8 dlc; | ||
|  | 	__le32 hnd; | ||
|  | 	__le32 id; /* upper 3 bits contain flags */ | ||
|  | 	u8 data[8]; | ||
|  | }; | ||
|  | 
 | ||
|  | struct tx_done_msg { | ||
|  | 	u8 len; | ||
|  | 	u8 cmd; | ||
|  | 	u8 net; | ||
|  | 	u8 status; | ||
|  | 	__le32 hnd; | ||
|  | 	__le32 ts; | ||
|  | }; | ||
|  | 
 | ||
|  | struct id_filter_msg { | ||
|  | 	u8 len; | ||
|  | 	u8 cmd; | ||
|  | 	u8 net; | ||
|  | 	u8 option; | ||
|  | 	__le32 mask[ESD_MAX_ID_SEGMENT + 1]; | ||
|  | }; | ||
|  | 
 | ||
|  | struct set_baudrate_msg { | ||
|  | 	u8 len; | ||
|  | 	u8 cmd; | ||
|  | 	u8 net; | ||
|  | 	u8 rsvd; | ||
|  | 	__le32 baud; | ||
|  | }; | ||
|  | 
 | ||
|  | /* Main message type used between library and application */ | ||
|  | struct __attribute__ ((packed)) esd_usb2_msg { | ||
|  | 	union { | ||
|  | 		struct header_msg hdr; | ||
|  | 		struct version_msg version; | ||
|  | 		struct version_reply_msg version_reply; | ||
|  | 		struct rx_msg rx; | ||
|  | 		struct tx_msg tx; | ||
|  | 		struct tx_done_msg txdone; | ||
|  | 		struct set_baudrate_msg setbaud; | ||
|  | 		struct id_filter_msg filter; | ||
|  | 	} msg; | ||
|  | }; | ||
|  | 
 | ||
|  | static struct usb_device_id esd_usb2_table[] = { | ||
|  | 	{USB_DEVICE(USB_ESDGMBH_VENDOR_ID, USB_CANUSB2_PRODUCT_ID)}, | ||
|  | 	{} | ||
|  | }; | ||
|  | MODULE_DEVICE_TABLE(usb, esd_usb2_table); | ||
|  | 
 | ||
|  | struct esd_usb2_net_priv; | ||
|  | 
 | ||
|  | struct esd_tx_urb_context { | ||
|  | 	struct esd_usb2_net_priv *priv; | ||
|  | 	u32 echo_index; | ||
|  | 	int dlc; | ||
|  | }; | ||
|  | 
 | ||
|  | struct esd_usb2 { | ||
|  | 	struct usb_device *udev; | ||
|  | 	struct esd_usb2_net_priv *nets[ESD_USB2_MAX_NETS]; | ||
|  | 
 | ||
|  | 	struct usb_anchor rx_submitted; | ||
|  | 
 | ||
|  | 	int net_count; | ||
|  | 	u32 version; | ||
|  | 	int rxinitdone; | ||
|  | }; | ||
|  | 
 | ||
|  | struct esd_usb2_net_priv { | ||
|  | 	struct can_priv can; /* must be the first member */ | ||
|  | 
 | ||
|  | 	atomic_t active_tx_jobs; | ||
|  | 	struct usb_anchor tx_submitted; | ||
|  | 	struct esd_tx_urb_context tx_contexts[MAX_TX_URBS]; | ||
|  | 
 | ||
|  | 	int open_time; | ||
|  | 	struct esd_usb2 *usb2; | ||
|  | 	struct net_device *netdev; | ||
|  | 	int index; | ||
|  | 	u8 old_state; | ||
|  | 	struct can_berr_counter bec; | ||
|  | }; | ||
|  | 
 | ||
|  | static void esd_usb2_rx_event(struct esd_usb2_net_priv *priv, | ||
|  | 			      struct esd_usb2_msg *msg) | ||
|  | { | ||
|  | 	struct net_device_stats *stats = &priv->netdev->stats; | ||
|  | 	struct can_frame *cf; | ||
|  | 	struct sk_buff *skb; | ||
|  | 	u32 id = le32_to_cpu(msg->msg.rx.id) & ESD_IDMASK; | ||
|  | 
 | ||
|  | 	if (id == ESD_EV_CAN_ERROR_EXT) { | ||
|  | 		u8 state = msg->msg.rx.data[0]; | ||
|  | 		u8 ecc = msg->msg.rx.data[1]; | ||
|  | 		u8 txerr = msg->msg.rx.data[2]; | ||
|  | 		u8 rxerr = msg->msg.rx.data[3]; | ||
|  | 
 | ||
|  | 		skb = alloc_can_err_skb(priv->netdev, &cf); | ||
|  | 		if (skb == NULL) { | ||
|  | 			stats->rx_dropped++; | ||
|  | 			return; | ||
|  | 		} | ||
|  | 
 | ||
|  | 		if (state != priv->old_state) { | ||
|  | 			priv->old_state = state; | ||
|  | 
 | ||
|  | 			switch (state & ESD_BUSSTATE_MASK) { | ||
|  | 			case ESD_BUSSTATE_BUSOFF: | ||
|  | 				priv->can.state = CAN_STATE_BUS_OFF; | ||
|  | 				cf->can_id |= CAN_ERR_BUSOFF; | ||
|  | 				can_bus_off(priv->netdev); | ||
|  | 				break; | ||
|  | 			case ESD_BUSSTATE_WARN: | ||
|  | 				priv->can.state = CAN_STATE_ERROR_WARNING; | ||
|  | 				priv->can.can_stats.error_warning++; | ||
|  | 				break; | ||
|  | 			case ESD_BUSSTATE_ERRPASSIVE: | ||
|  | 				priv->can.state = CAN_STATE_ERROR_PASSIVE; | ||
|  | 				priv->can.can_stats.error_passive++; | ||
|  | 				break; | ||
|  | 			default: | ||
|  | 				priv->can.state = CAN_STATE_ERROR_ACTIVE; | ||
|  | 				break; | ||
|  | 			} | ||
|  | 		} else { | ||
|  | 			priv->can.can_stats.bus_error++; | ||
|  | 			stats->rx_errors++; | ||
|  | 
 | ||
|  | 			cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; | ||
|  | 
 | ||
|  | 			switch (ecc & SJA1000_ECC_MASK) { | ||
|  | 			case SJA1000_ECC_BIT: | ||
|  | 				cf->data[2] |= CAN_ERR_PROT_BIT; | ||
|  | 				break; | ||
|  | 			case SJA1000_ECC_FORM: | ||
|  | 				cf->data[2] |= CAN_ERR_PROT_FORM; | ||
|  | 				break; | ||
|  | 			case SJA1000_ECC_STUFF: | ||
|  | 				cf->data[2] |= CAN_ERR_PROT_STUFF; | ||
|  | 				break; | ||
|  | 			default: | ||
|  | 				cf->data[2] |= CAN_ERR_PROT_UNSPEC; | ||
|  | 				cf->data[3] = ecc & SJA1000_ECC_SEG; | ||
|  | 				break; | ||
|  | 			} | ||
|  | 
 | ||
|  | 			/* Error occured during transmission? */ | ||
|  | 			if (!(ecc & SJA1000_ECC_DIR)) | ||
|  | 				cf->data[2] |= CAN_ERR_PROT_TX; | ||
|  | 
 | ||
|  | 			if (priv->can.state == CAN_STATE_ERROR_WARNING || | ||
|  | 			    priv->can.state == CAN_STATE_ERROR_PASSIVE) { | ||
|  | 				cf->data[1] = (txerr > rxerr) ? | ||
|  | 					CAN_ERR_CRTL_TX_PASSIVE : | ||
|  | 					CAN_ERR_CRTL_RX_PASSIVE; | ||
|  | 			} | ||
|  | 			cf->data[6] = txerr; | ||
|  | 			cf->data[7] = rxerr; | ||
|  | 		} | ||
|  | 
 | ||
|  | 		netif_rx(skb); | ||
|  | 
 | ||
|  | 		priv->bec.txerr = txerr; | ||
|  | 		priv->bec.rxerr = rxerr; | ||
|  | 
 | ||
|  | 		stats->rx_packets++; | ||
|  | 		stats->rx_bytes += cf->can_dlc; | ||
|  | 	} | ||
|  | } | ||
|  | 
 | ||
|  | static void esd_usb2_rx_can_msg(struct esd_usb2_net_priv *priv, | ||
|  | 				struct esd_usb2_msg *msg) | ||
|  | { | ||
|  | 	struct net_device_stats *stats = &priv->netdev->stats; | ||
|  | 	struct can_frame *cf; | ||
|  | 	struct sk_buff *skb; | ||
|  | 	int i; | ||
|  | 	u32 id; | ||
|  | 
 | ||
|  | 	if (!netif_device_present(priv->netdev)) | ||
|  | 		return; | ||
|  | 
 | ||
|  | 	id = le32_to_cpu(msg->msg.rx.id); | ||
|  | 
 | ||
|  | 	if (id & ESD_EVENT) { | ||
|  | 		esd_usb2_rx_event(priv, msg); | ||
|  | 	} else { | ||
|  | 		skb = alloc_can_skb(priv->netdev, &cf); | ||
|  | 		if (skb == NULL) { | ||
|  | 			stats->rx_dropped++; | ||
|  | 			return; | ||
|  | 		} | ||
|  | 
 | ||
|  | 		cf->can_id = id & ESD_IDMASK; | ||
|  | 		cf->can_dlc = get_can_dlc(msg->msg.rx.dlc); | ||
|  | 
 | ||
|  | 		if (id & ESD_EXTID) | ||
|  | 			cf->can_id |= CAN_EFF_FLAG; | ||
|  | 
 | ||
|  | 		if (msg->msg.rx.dlc & ESD_RTR) { | ||
|  | 			cf->can_id |= CAN_RTR_FLAG; | ||
|  | 		} else { | ||
|  | 			for (i = 0; i < cf->can_dlc; i++) | ||
|  | 				cf->data[i] = msg->msg.rx.data[i]; | ||
|  | 		} | ||
|  | 
 | ||
|  | 		netif_rx(skb); | ||
|  | 
 | ||
|  | 		stats->rx_packets++; | ||
|  | 		stats->rx_bytes += cf->can_dlc; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	return; | ||
|  | } | ||
|  | 
 | ||
|  | static void esd_usb2_tx_done_msg(struct esd_usb2_net_priv *priv, | ||
|  | 				 struct esd_usb2_msg *msg) | ||
|  | { | ||
|  | 	struct net_device_stats *stats = &priv->netdev->stats; | ||
|  | 	struct net_device *netdev = priv->netdev; | ||
|  | 	struct esd_tx_urb_context *context; | ||
|  | 
 | ||
|  | 	if (!netif_device_present(netdev)) | ||
|  | 		return; | ||
|  | 
 | ||
|  | 	context = &priv->tx_contexts[msg->msg.txdone.hnd & (MAX_TX_URBS - 1)]; | ||
|  | 
 | ||
|  | 	if (!msg->msg.txdone.status) { | ||
|  | 		stats->tx_packets++; | ||
|  | 		stats->tx_bytes += context->dlc; | ||
|  | 		can_get_echo_skb(netdev, context->echo_index); | ||
|  | 	} else { | ||
|  | 		stats->tx_errors++; | ||
|  | 		can_free_echo_skb(netdev, context->echo_index); | ||
|  | 	} | ||
|  | 
 | ||
|  | 	/* Release context */ | ||
|  | 	context->echo_index = MAX_TX_URBS; | ||
|  | 	atomic_dec(&priv->active_tx_jobs); | ||
|  | 
 | ||
|  | 	netif_wake_queue(netdev); | ||
|  | } | ||
|  | 
 | ||
|  | static void esd_usb2_read_bulk_callback(struct urb *urb) | ||
|  | { | ||
|  | 	struct esd_usb2 *dev = urb->context; | ||
|  | 	int retval; | ||
|  | 	int pos = 0; | ||
|  | 	int i; | ||
|  | 
 | ||
|  | 	switch (urb->status) { | ||
|  | 	case 0: /* success */ | ||
|  | 		break; | ||
|  | 
 | ||
|  | 	case -ENOENT: | ||
|  | 	case -ESHUTDOWN: | ||
|  | 		return; | ||
|  | 
 | ||
|  | 	default: | ||
|  | 		dev_info(dev->udev->dev.parent, | ||
|  | 			 "Rx URB aborted (%d)\n", urb->status); | ||
|  | 		goto resubmit_urb; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	while (pos < urb->actual_length) { | ||
|  | 		struct esd_usb2_msg *msg; | ||
|  | 
 | ||
|  | 		msg = (struct esd_usb2_msg *)(urb->transfer_buffer + pos); | ||
|  | 
 | ||
|  | 		switch (msg->msg.hdr.cmd) { | ||
|  | 		case CMD_CAN_RX: | ||
|  | 			esd_usb2_rx_can_msg(dev->nets[msg->msg.rx.net], msg); | ||
|  | 			break; | ||
|  | 
 | ||
|  | 		case CMD_CAN_TX: | ||
|  | 			esd_usb2_tx_done_msg(dev->nets[msg->msg.txdone.net], | ||
|  | 					     msg); | ||
|  | 			break; | ||
|  | 		} | ||
|  | 
 | ||
|  | 		pos += msg->msg.hdr.len << 2; | ||
|  | 
 | ||
|  | 		if (pos > urb->actual_length) { | ||
|  | 			dev_err(dev->udev->dev.parent, "format error\n"); | ||
|  | 			break; | ||
|  | 		} | ||
|  | 	} | ||
|  | 
 | ||
|  | resubmit_urb: | ||
|  | 	usb_fill_bulk_urb(urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1), | ||
|  | 			  urb->transfer_buffer, RX_BUFFER_SIZE, | ||
|  | 			  esd_usb2_read_bulk_callback, dev); | ||
|  | 
 | ||
|  | 	retval = usb_submit_urb(urb, GFP_ATOMIC); | ||
|  | 	if (retval == -ENODEV) { | ||
|  | 		for (i = 0; i < dev->net_count; i++) { | ||
|  | 			if (dev->nets[i]) | ||
|  | 				netif_device_detach(dev->nets[i]->netdev); | ||
|  | 		} | ||
|  | 	} else if (retval) { | ||
|  | 		dev_err(dev->udev->dev.parent, | ||
|  | 			"failed resubmitting read bulk urb: %d\n", retval); | ||
|  | 	} | ||
|  | 
 | ||
|  | 	return; | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * callback for bulk IN urb | ||
|  |  */ | ||
|  | static void esd_usb2_write_bulk_callback(struct urb *urb) | ||
|  | { | ||
|  | 	struct esd_tx_urb_context *context = urb->context; | ||
|  | 	struct esd_usb2_net_priv *priv; | ||
|  | 	struct esd_usb2 *dev; | ||
|  | 	struct net_device *netdev; | ||
|  | 	size_t size = sizeof(struct esd_usb2_msg); | ||
|  | 
 | ||
|  | 	WARN_ON(!context); | ||
|  | 
 | ||
|  | 	priv = context->priv; | ||
|  | 	netdev = priv->netdev; | ||
|  | 	dev = priv->usb2; | ||
|  | 
 | ||
|  | 	/* free up our allocated buffer */ | ||
|  | 	usb_free_coherent(urb->dev, size, | ||
|  | 			  urb->transfer_buffer, urb->transfer_dma); | ||
|  | 
 | ||
|  | 	if (!netif_device_present(netdev)) | ||
|  | 		return; | ||
|  | 
 | ||
|  | 	if (urb->status) | ||
|  | 		dev_info(netdev->dev.parent, "Tx URB aborted (%d)\n", | ||
|  | 			 urb->status); | ||
|  | 
 | ||
|  | 	netdev->trans_start = jiffies; | ||
|  | } | ||
|  | 
 | ||
|  | static ssize_t show_firmware(struct device *d, | ||
|  | 			     struct device_attribute *attr, char *buf) | ||
|  | { | ||
|  | 	struct usb_interface *intf = to_usb_interface(d); | ||
|  | 	struct esd_usb2 *dev = usb_get_intfdata(intf); | ||
|  | 
 | ||
|  | 	return sprintf(buf, "%d.%d.%d\n", | ||
|  | 		       (dev->version >> 12) & 0xf, | ||
|  | 		       (dev->version >> 8) & 0xf, | ||
|  | 		       dev->version & 0xff); | ||
|  | } | ||
|  | static DEVICE_ATTR(firmware, S_IRUGO, show_firmware, NULL); | ||
|  | 
 | ||
|  | static ssize_t show_hardware(struct device *d, | ||
|  | 			     struct device_attribute *attr, char *buf) | ||
|  | { | ||
|  | 	struct usb_interface *intf = to_usb_interface(d); | ||
|  | 	struct esd_usb2 *dev = usb_get_intfdata(intf); | ||
|  | 
 | ||
|  | 	return sprintf(buf, "%d.%d.%d\n", | ||
|  | 		       (dev->version >> 28) & 0xf, | ||
|  | 		       (dev->version >> 24) & 0xf, | ||
|  | 		       (dev->version >> 16) & 0xff); | ||
|  | } | ||
|  | static DEVICE_ATTR(hardware, S_IRUGO, show_hardware, NULL); | ||
|  | 
 | ||
|  | static ssize_t show_nets(struct device *d, | ||
|  | 			 struct device_attribute *attr, char *buf) | ||
|  | { | ||
|  | 	struct usb_interface *intf = to_usb_interface(d); | ||
|  | 	struct esd_usb2 *dev = usb_get_intfdata(intf); | ||
|  | 
 | ||
|  | 	return sprintf(buf, "%d", dev->net_count); | ||
|  | } | ||
|  | static DEVICE_ATTR(nets, S_IRUGO, show_nets, NULL); | ||
|  | 
 | ||
|  | static int esd_usb2_send_msg(struct esd_usb2 *dev, struct esd_usb2_msg *msg) | ||
|  | { | ||
|  | 	int actual_length; | ||
|  | 
 | ||
|  | 	return usb_bulk_msg(dev->udev, | ||
|  | 			    usb_sndbulkpipe(dev->udev, 2), | ||
|  | 			    msg, | ||
|  | 			    msg->msg.hdr.len << 2, | ||
|  | 			    &actual_length, | ||
|  | 			    1000); | ||
|  | } | ||
|  | 
 | ||
|  | static int esd_usb2_wait_msg(struct esd_usb2 *dev, | ||
|  | 			     struct esd_usb2_msg *msg) | ||
|  | { | ||
|  | 	int actual_length; | ||
|  | 
 | ||
|  | 	return usb_bulk_msg(dev->udev, | ||
|  | 			    usb_rcvbulkpipe(dev->udev, 1), | ||
|  | 			    msg, | ||
|  | 			    sizeof(*msg), | ||
|  | 			    &actual_length, | ||
|  | 			    1000); | ||
|  | } | ||
|  | 
 | ||
|  | static int esd_usb2_setup_rx_urbs(struct esd_usb2 *dev) | ||
|  | { | ||
|  | 	int i, err = 0; | ||
|  | 
 | ||
|  | 	if (dev->rxinitdone) | ||
|  | 		return 0; | ||
|  | 
 | ||
|  | 	for (i = 0; i < MAX_RX_URBS; i++) { | ||
|  | 		struct urb *urb = NULL; | ||
|  | 		u8 *buf = NULL; | ||
|  | 
 | ||
|  | 		/* create a URB, and a buffer for it */ | ||
|  | 		urb = usb_alloc_urb(0, GFP_KERNEL); | ||
|  | 		if (!urb) { | ||
|  | 			dev_warn(dev->udev->dev.parent, | ||
|  | 				 "No memory left for URBs\n"); | ||
|  | 			err = -ENOMEM; | ||
|  | 			break; | ||
|  | 		} | ||
|  | 
 | ||
|  | 		buf = usb_alloc_coherent(dev->udev, RX_BUFFER_SIZE, GFP_KERNEL, | ||
|  | 					 &urb->transfer_dma); | ||
|  | 		if (!buf) { | ||
|  | 			dev_warn(dev->udev->dev.parent, | ||
|  | 				 "No memory left for USB buffer\n"); | ||
|  | 			err = -ENOMEM; | ||
|  | 			goto freeurb; | ||
|  | 		} | ||
|  | 
 | ||
|  | 		usb_fill_bulk_urb(urb, dev->udev, | ||
|  | 				  usb_rcvbulkpipe(dev->udev, 1), | ||
|  | 				  buf, RX_BUFFER_SIZE, | ||
|  | 				  esd_usb2_read_bulk_callback, dev); | ||
|  | 		urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; | ||
|  | 		usb_anchor_urb(urb, &dev->rx_submitted); | ||
|  | 
 | ||
|  | 		err = usb_submit_urb(urb, GFP_KERNEL); | ||
|  | 		if (err) { | ||
|  | 			usb_unanchor_urb(urb); | ||
|  | 			usb_free_coherent(dev->udev, RX_BUFFER_SIZE, buf, | ||
|  | 					  urb->transfer_dma); | ||
|  | 		} | ||
|  | 
 | ||
|  | freeurb: | ||
|  | 		/* Drop reference, USB core will take care of freeing it */ | ||
|  | 		usb_free_urb(urb); | ||
|  | 		if (err) | ||
|  | 			break; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	/* Did we submit any URBs */ | ||
|  | 	if (i == 0) { | ||
|  | 		dev_err(dev->udev->dev.parent, "couldn't setup read URBs\n"); | ||
|  | 		return err; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	/* Warn if we've couldn't transmit all the URBs */ | ||
|  | 	if (i < MAX_RX_URBS) { | ||
|  | 		dev_warn(dev->udev->dev.parent, | ||
|  | 			 "rx performance may be slow\n"); | ||
|  | 	} | ||
|  | 
 | ||
|  | 	dev->rxinitdone = 1; | ||
|  | 	return 0; | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * Start interface | ||
|  |  */ | ||
|  | static int esd_usb2_start(struct esd_usb2_net_priv *priv) | ||
|  | { | ||
|  | 	struct esd_usb2 *dev = priv->usb2; | ||
|  | 	struct net_device *netdev = priv->netdev; | ||
|  | 	struct esd_usb2_msg msg; | ||
|  | 	int err, i; | ||
|  | 
 | ||
|  | 	/*
 | ||
|  | 	 * Enable all IDs | ||
|  | 	 * The IDADD message takes up to 64 32 bit bitmasks (2048 bits). | ||
|  | 	 * Each bit represents one 11 bit CAN identifier. A set bit | ||
|  | 	 * enables reception of the corresponding CAN identifier. A cleared | ||
|  | 	 * bit disabled this identifier. An additional bitmask value | ||
|  | 	 * following the CAN 2.0A bits is used to enable reception of | ||
|  | 	 * extended CAN frames. Only the LSB of this final mask is checked | ||
|  | 	 * for the complete 29 bit ID range. The IDADD message also allows | ||
|  | 	 * filter configuration for an ID subset. In this case you can add | ||
|  | 	 * the number of the starting bitmask (0..64) to the filter.option | ||
|  | 	 * field followed by only some bitmasks. | ||
|  | 	 */ | ||
|  | 	msg.msg.hdr.cmd = CMD_IDADD; | ||
|  | 	msg.msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT; | ||
|  | 	msg.msg.filter.net = priv->index; | ||
|  | 	msg.msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */ | ||
|  | 	for (i = 0; i < ESD_MAX_ID_SEGMENT; i++) | ||
|  | 		msg.msg.filter.mask[i] = cpu_to_le32(0xffffffff); | ||
|  | 	/* enable 29bit extended IDs */ | ||
|  | 	msg.msg.filter.mask[ESD_MAX_ID_SEGMENT] = cpu_to_le32(0x00000001); | ||
|  | 
 | ||
|  | 	err = esd_usb2_send_msg(dev, &msg); | ||
|  | 	if (err) | ||
|  | 		goto failed; | ||
|  | 
 | ||
|  | 	err = esd_usb2_setup_rx_urbs(dev); | ||
|  | 	if (err) | ||
|  | 		goto failed; | ||
|  | 
 | ||
|  | 	priv->can.state = CAN_STATE_ERROR_ACTIVE; | ||
|  | 
 | ||
|  | 	return 0; | ||
|  | 
 | ||
|  | failed: | ||
|  | 	if (err == -ENODEV) | ||
|  | 		netif_device_detach(netdev); | ||
|  | 
 | ||
|  | 	dev_err(netdev->dev.parent, "couldn't start device: %d\n", err); | ||
|  | 
 | ||
|  | 	return err; | ||
|  | } | ||
|  | 
 | ||
|  | static void unlink_all_urbs(struct esd_usb2 *dev) | ||
|  | { | ||
|  | 	struct esd_usb2_net_priv *priv; | ||
|  | 	int i; | ||
|  | 
 | ||
|  | 	usb_kill_anchored_urbs(&dev->rx_submitted); | ||
|  | 	for (i = 0; i < dev->net_count; i++) { | ||
|  | 		priv = dev->nets[i]; | ||
|  | 		if (priv) { | ||
|  | 			usb_kill_anchored_urbs(&priv->tx_submitted); | ||
|  | 			atomic_set(&priv->active_tx_jobs, 0); | ||
|  | 
 | ||
|  | 			for (i = 0; i < MAX_TX_URBS; i++) | ||
|  | 				priv->tx_contexts[i].echo_index = MAX_TX_URBS; | ||
|  | 		} | ||
|  | 	} | ||
|  | } | ||
|  | 
 | ||
|  | static int esd_usb2_open(struct net_device *netdev) | ||
|  | { | ||
|  | 	struct esd_usb2_net_priv *priv = netdev_priv(netdev); | ||
|  | 	int err; | ||
|  | 
 | ||
|  | 	/* common open */ | ||
|  | 	err = open_candev(netdev); | ||
|  | 	if (err) | ||
|  | 		return err; | ||
|  | 
 | ||
|  | 	/* finally start device */ | ||
|  | 	err = esd_usb2_start(priv); | ||
|  | 	if (err) { | ||
|  | 		dev_warn(netdev->dev.parent, | ||
|  | 			 "couldn't start device: %d\n", err); | ||
|  | 		close_candev(netdev); | ||
|  | 		return err; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	priv->open_time = jiffies; | ||
|  | 
 | ||
|  | 	netif_start_queue(netdev); | ||
|  | 
 | ||
|  | 	return 0; | ||
|  | } | ||
|  | 
 | ||
|  | static netdev_tx_t esd_usb2_start_xmit(struct sk_buff *skb, | ||
|  | 				      struct net_device *netdev) | ||
|  | { | ||
|  | 	struct esd_usb2_net_priv *priv = netdev_priv(netdev); | ||
|  | 	struct esd_usb2 *dev = priv->usb2; | ||
|  | 	struct esd_tx_urb_context *context = NULL; | ||
|  | 	struct net_device_stats *stats = &netdev->stats; | ||
|  | 	struct can_frame *cf = (struct can_frame *)skb->data; | ||
|  | 	struct esd_usb2_msg *msg; | ||
|  | 	struct urb *urb; | ||
|  | 	u8 *buf; | ||
|  | 	int i, err; | ||
|  | 	int ret = NETDEV_TX_OK; | ||
|  | 	size_t size = sizeof(struct esd_usb2_msg); | ||
|  | 
 | ||
|  | 	if (can_dropped_invalid_skb(netdev, skb)) | ||
|  | 		return NETDEV_TX_OK; | ||
|  | 
 | ||
|  | 	/* create a URB, and a buffer for it, and copy the data to the URB */ | ||
|  | 	urb = usb_alloc_urb(0, GFP_ATOMIC); | ||
|  | 	if (!urb) { | ||
|  | 		dev_err(netdev->dev.parent, "No memory left for URBs\n"); | ||
|  | 		stats->tx_dropped++; | ||
|  | 		dev_kfree_skb(skb); | ||
|  | 		goto nourbmem; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	buf = usb_alloc_coherent(dev->udev, size, GFP_ATOMIC, | ||
|  | 				 &urb->transfer_dma); | ||
|  | 	if (!buf) { | ||
|  | 		dev_err(netdev->dev.parent, "No memory left for USB buffer\n"); | ||
|  | 		stats->tx_dropped++; | ||
|  | 		dev_kfree_skb(skb); | ||
|  | 		goto nobufmem; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	msg = (struct esd_usb2_msg *)buf; | ||
|  | 
 | ||
|  | 	msg->msg.hdr.len = 3; /* minimal length */ | ||
|  | 	msg->msg.hdr.cmd = CMD_CAN_TX; | ||
|  | 	msg->msg.tx.net = priv->index; | ||
|  | 	msg->msg.tx.dlc = cf->can_dlc; | ||
|  | 	msg->msg.tx.id = cpu_to_le32(cf->can_id & CAN_ERR_MASK); | ||
|  | 
 | ||
|  | 	if (cf->can_id & CAN_RTR_FLAG) | ||
|  | 		msg->msg.tx.dlc |= ESD_RTR; | ||
|  | 
 | ||
|  | 	if (cf->can_id & CAN_EFF_FLAG) | ||
|  | 		msg->msg.tx.id |= cpu_to_le32(ESD_EXTID); | ||
|  | 
 | ||
|  | 	for (i = 0; i < cf->can_dlc; i++) | ||
|  | 		msg->msg.tx.data[i] = cf->data[i]; | ||
|  | 
 | ||
|  | 	msg->msg.hdr.len += (cf->can_dlc + 3) >> 2; | ||
|  | 
 | ||
|  | 	for (i = 0; i < MAX_TX_URBS; i++) { | ||
|  | 		if (priv->tx_contexts[i].echo_index == MAX_TX_URBS) { | ||
|  | 			context = &priv->tx_contexts[i]; | ||
|  | 			break; | ||
|  | 		} | ||
|  | 	} | ||
|  | 
 | ||
|  | 	/*
 | ||
|  | 	 * This may never happen. | ||
|  | 	 */ | ||
|  | 	if (!context) { | ||
|  | 		dev_warn(netdev->dev.parent, "couldn't find free context\n"); | ||
|  | 		ret = NETDEV_TX_BUSY; | ||
|  | 		goto releasebuf; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	context->priv = priv; | ||
|  | 	context->echo_index = i; | ||
|  | 	context->dlc = cf->can_dlc; | ||
|  | 
 | ||
|  | 	/* hnd must not be 0 - MSB is stripped in txdone handling */ | ||
|  | 	msg->msg.tx.hnd = 0x80000000 | i; /* returned in TX done message */ | ||
|  | 
 | ||
|  | 	usb_fill_bulk_urb(urb, dev->udev, usb_sndbulkpipe(dev->udev, 2), buf, | ||
|  | 			  msg->msg.hdr.len << 2, | ||
|  | 			  esd_usb2_write_bulk_callback, context); | ||
|  | 
 | ||
|  | 	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; | ||
|  | 
 | ||
|  | 	usb_anchor_urb(urb, &priv->tx_submitted); | ||
|  | 
 | ||
|  | 	can_put_echo_skb(skb, netdev, context->echo_index); | ||
|  | 
 | ||
|  | 	atomic_inc(&priv->active_tx_jobs); | ||
|  | 
 | ||
|  | 	/* Slow down tx path */ | ||
|  | 	if (atomic_read(&priv->active_tx_jobs) >= MAX_TX_URBS) | ||
|  | 		netif_stop_queue(netdev); | ||
|  | 
 | ||
|  | 	err = usb_submit_urb(urb, GFP_ATOMIC); | ||
|  | 	if (err) { | ||
|  | 		can_free_echo_skb(netdev, context->echo_index); | ||
|  | 
 | ||
|  | 		atomic_dec(&priv->active_tx_jobs); | ||
|  | 		usb_unanchor_urb(urb); | ||
|  | 
 | ||
|  | 		stats->tx_dropped++; | ||
|  | 
 | ||
|  | 		if (err == -ENODEV) | ||
|  | 			netif_device_detach(netdev); | ||
|  | 		else | ||
|  | 			dev_warn(netdev->dev.parent, "failed tx_urb %d\n", err); | ||
|  | 
 | ||
|  | 		goto releasebuf; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	netdev->trans_start = jiffies; | ||
|  | 
 | ||
|  | 	/*
 | ||
|  | 	 * Release our reference to this URB, the USB core will eventually free | ||
|  | 	 * it entirely. | ||
|  | 	 */ | ||
|  | 	usb_free_urb(urb); | ||
|  | 
 | ||
|  | 	return NETDEV_TX_OK; | ||
|  | 
 | ||
|  | releasebuf: | ||
|  | 	usb_free_coherent(dev->udev, size, buf, urb->transfer_dma); | ||
|  | 
 | ||
|  | nobufmem: | ||
|  | 	usb_free_urb(urb); | ||
|  | 
 | ||
|  | nourbmem: | ||
|  | 	return ret; | ||
|  | } | ||
|  | 
 | ||
|  | static int esd_usb2_close(struct net_device *netdev) | ||
|  | { | ||
|  | 	struct esd_usb2_net_priv *priv = netdev_priv(netdev); | ||
|  | 	struct esd_usb2_msg msg; | ||
|  | 	int i; | ||
|  | 
 | ||
|  | 	/* Disable all IDs (see esd_usb2_start()) */ | ||
|  | 	msg.msg.hdr.cmd = CMD_IDADD; | ||
|  | 	msg.msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT; | ||
|  | 	msg.msg.filter.net = priv->index; | ||
|  | 	msg.msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */ | ||
|  | 	for (i = 0; i <= ESD_MAX_ID_SEGMENT; i++) | ||
|  | 		msg.msg.filter.mask[i] = 0; | ||
|  | 	if (esd_usb2_send_msg(priv->usb2, &msg) < 0) | ||
|  | 		dev_err(netdev->dev.parent, "sending idadd message failed\n"); | ||
|  | 
 | ||
|  | 	/* set CAN controller to reset mode */ | ||
|  | 	msg.msg.hdr.len = 2; | ||
|  | 	msg.msg.hdr.cmd = CMD_SETBAUD; | ||
|  | 	msg.msg.setbaud.net = priv->index; | ||
|  | 	msg.msg.setbaud.rsvd = 0; | ||
|  | 	msg.msg.setbaud.baud = cpu_to_le32(ESD_USB2_NO_BAUDRATE); | ||
|  | 	if (esd_usb2_send_msg(priv->usb2, &msg) < 0) | ||
|  | 		dev_err(netdev->dev.parent, "sending setbaud message failed\n"); | ||
|  | 
 | ||
|  | 	priv->can.state = CAN_STATE_STOPPED; | ||
|  | 
 | ||
|  | 	netif_stop_queue(netdev); | ||
|  | 
 | ||
|  | 	close_candev(netdev); | ||
|  | 
 | ||
|  | 	priv->open_time = 0; | ||
|  | 
 | ||
|  | 	return 0; | ||
|  | } | ||
|  | 
 | ||
|  | static const struct net_device_ops esd_usb2_netdev_ops = { | ||
|  | 	.ndo_open = esd_usb2_open, | ||
|  | 	.ndo_stop = esd_usb2_close, | ||
|  | 	.ndo_start_xmit = esd_usb2_start_xmit, | ||
|  | }; | ||
|  | 
 | ||
|  | static struct can_bittiming_const esd_usb2_bittiming_const = { | ||
|  | 	.name = "esd_usb2", | ||
|  | 	.tseg1_min = ESD_USB2_TSEG1_MIN, | ||
|  | 	.tseg1_max = ESD_USB2_TSEG1_MAX, | ||
|  | 	.tseg2_min = ESD_USB2_TSEG2_MIN, | ||
|  | 	.tseg2_max = ESD_USB2_TSEG2_MAX, | ||
|  | 	.sjw_max = ESD_USB2_SJW_MAX, | ||
|  | 	.brp_min = ESD_USB2_BRP_MIN, | ||
|  | 	.brp_max = ESD_USB2_BRP_MAX, | ||
|  | 	.brp_inc = ESD_USB2_BRP_INC, | ||
|  | }; | ||
|  | 
 | ||
|  | static int esd_usb2_set_bittiming(struct net_device *netdev) | ||
|  | { | ||
|  | 	struct esd_usb2_net_priv *priv = netdev_priv(netdev); | ||
|  | 	struct can_bittiming *bt = &priv->can.bittiming; | ||
|  | 	struct esd_usb2_msg msg; | ||
|  | 	u32 canbtr; | ||
|  | 
 | ||
|  | 	canbtr = ESD_USB2_UBR; | ||
|  | 	canbtr |= (bt->brp - 1) & (ESD_USB2_BRP_MAX - 1); | ||
|  | 	canbtr |= ((bt->sjw - 1) & (ESD_USB2_SJW_MAX - 1)) | ||
|  | 		<< ESD_USB2_SJW_SHIFT; | ||
|  | 	canbtr |= ((bt->prop_seg + bt->phase_seg1 - 1) | ||
|  | 		   & (ESD_USB2_TSEG1_MAX - 1)) | ||
|  | 		<< ESD_USB2_TSEG1_SHIFT; | ||
|  | 	canbtr |= ((bt->phase_seg2 - 1) & (ESD_USB2_TSEG2_MAX - 1)) | ||
|  | 		<< ESD_USB2_TSEG2_SHIFT; | ||
|  | 	if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) | ||
|  | 		canbtr |= ESD_USB2_3_SAMPLES; | ||
|  | 
 | ||
|  | 	msg.msg.hdr.len = 2; | ||
|  | 	msg.msg.hdr.cmd = CMD_SETBAUD; | ||
|  | 	msg.msg.setbaud.net = priv->index; | ||
|  | 	msg.msg.setbaud.rsvd = 0; | ||
|  | 	msg.msg.setbaud.baud = cpu_to_le32(canbtr); | ||
|  | 
 | ||
|  | 	dev_info(netdev->dev.parent, "setting BTR=%#x\n", canbtr); | ||
|  | 
 | ||
|  | 	return esd_usb2_send_msg(priv->usb2, &msg); | ||
|  | } | ||
|  | 
 | ||
|  | static int esd_usb2_get_berr_counter(const struct net_device *netdev, | ||
|  | 				     struct can_berr_counter *bec) | ||
|  | { | ||
|  | 	struct esd_usb2_net_priv *priv = netdev_priv(netdev); | ||
|  | 
 | ||
|  | 	bec->txerr = priv->bec.txerr; | ||
|  | 	bec->rxerr = priv->bec.rxerr; | ||
|  | 
 | ||
|  | 	return 0; | ||
|  | } | ||
|  | 
 | ||
|  | static int esd_usb2_set_mode(struct net_device *netdev, enum can_mode mode) | ||
|  | { | ||
|  | 	struct esd_usb2_net_priv *priv = netdev_priv(netdev); | ||
|  | 
 | ||
|  | 	if (!priv->open_time) | ||
|  | 		return -EINVAL; | ||
|  | 
 | ||
|  | 	switch (mode) { | ||
|  | 	case CAN_MODE_START: | ||
|  | 		netif_wake_queue(netdev); | ||
|  | 		break; | ||
|  | 
 | ||
|  | 	default: | ||
|  | 		return -EOPNOTSUPP; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	return 0; | ||
|  | } | ||
|  | 
 | ||
|  | static int esd_usb2_probe_one_net(struct usb_interface *intf, int index) | ||
|  | { | ||
|  | 	struct esd_usb2 *dev = usb_get_intfdata(intf); | ||
|  | 	struct net_device *netdev; | ||
|  | 	struct esd_usb2_net_priv *priv; | ||
|  | 	int err = 0; | ||
|  | 	int i; | ||
|  | 
 | ||
|  | 	netdev = alloc_candev(sizeof(*priv), MAX_TX_URBS); | ||
|  | 	if (!netdev) { | ||
|  | 		dev_err(&intf->dev, "couldn't alloc candev\n"); | ||
|  | 		err = -ENOMEM; | ||
|  | 		goto done; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	priv = netdev_priv(netdev); | ||
|  | 
 | ||
|  | 	init_usb_anchor(&priv->tx_submitted); | ||
|  | 	atomic_set(&priv->active_tx_jobs, 0); | ||
|  | 
 | ||
|  | 	for (i = 0; i < MAX_TX_URBS; i++) | ||
|  | 		priv->tx_contexts[i].echo_index = MAX_TX_URBS; | ||
|  | 
 | ||
|  | 	priv->usb2 = dev; | ||
|  | 	priv->netdev = netdev; | ||
|  | 	priv->index = index; | ||
|  | 
 | ||
|  | 	priv->can.state = CAN_STATE_STOPPED; | ||
|  | 	priv->can.clock.freq = ESD_USB2_CAN_CLOCK; | ||
|  | 	priv->can.bittiming_const = &esd_usb2_bittiming_const; | ||
|  | 	priv->can.do_set_bittiming = esd_usb2_set_bittiming; | ||
|  | 	priv->can.do_set_mode = esd_usb2_set_mode; | ||
|  | 	priv->can.do_get_berr_counter = esd_usb2_get_berr_counter; | ||
|  | 	priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES; | ||
|  | 
 | ||
|  | 	netdev->flags |= IFF_ECHO; /* we support local echo */ | ||
|  | 
 | ||
|  | 	netdev->netdev_ops = &esd_usb2_netdev_ops; | ||
|  | 
 | ||
|  | 	SET_NETDEV_DEV(netdev, &intf->dev); | ||
|  | 
 | ||
|  | 	err = register_candev(netdev); | ||
|  | 	if (err) { | ||
|  | 		dev_err(&intf->dev, | ||
|  | 			"couldn't register CAN device: %d\n", err); | ||
|  | 		free_candev(netdev); | ||
|  | 		err = -ENOMEM; | ||
|  | 		goto done; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	dev->nets[index] = priv; | ||
|  | 	dev_info(netdev->dev.parent, "device %s registered\n", netdev->name); | ||
|  | 
 | ||
|  | done: | ||
|  | 	return err; | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * probe function for new USB2 devices | ||
|  |  * | ||
|  |  * check version information and number of available | ||
|  |  * CAN interfaces | ||
|  |  */ | ||
|  | static int esd_usb2_probe(struct usb_interface *intf, | ||
|  | 			 const struct usb_device_id *id) | ||
|  | { | ||
|  | 	struct esd_usb2 *dev; | ||
|  | 	struct esd_usb2_msg msg; | ||
|  | 	int i, err; | ||
|  | 
 | ||
|  | 	dev = kzalloc(sizeof(*dev), GFP_KERNEL); | ||
|  | 	if (!dev) { | ||
|  | 		err = -ENOMEM; | ||
|  | 		goto done; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	dev->udev = interface_to_usbdev(intf); | ||
|  | 
 | ||
|  | 	init_usb_anchor(&dev->rx_submitted); | ||
|  | 
 | ||
|  | 	usb_set_intfdata(intf, dev); | ||
|  | 
 | ||
|  | 	/* query number of CAN interfaces (nets) */ | ||
|  | 	msg.msg.hdr.cmd = CMD_VERSION; | ||
|  | 	msg.msg.hdr.len = 2; | ||
|  | 	msg.msg.version.rsvd = 0; | ||
|  | 	msg.msg.version.flags = 0; | ||
|  | 	msg.msg.version.drv_version = 0; | ||
|  | 
 | ||
|  | 	err = esd_usb2_send_msg(dev, &msg); | ||
|  | 	if (err < 0) { | ||
|  | 		dev_err(&intf->dev, "sending version message failed\n"); | ||
|  | 		goto free_dev; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	err = esd_usb2_wait_msg(dev, &msg); | ||
|  | 	if (err < 0) { | ||
|  | 		dev_err(&intf->dev, "no version message answer\n"); | ||
|  | 		goto free_dev; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	dev->net_count = (int)msg.msg.version_reply.nets; | ||
|  | 	dev->version = le32_to_cpu(msg.msg.version_reply.version); | ||
|  | 
 | ||
|  | 	if (device_create_file(&intf->dev, &dev_attr_firmware)) | ||
|  | 		dev_err(&intf->dev, | ||
|  | 			"Couldn't create device file for firmware\n"); | ||
|  | 
 | ||
|  | 	if (device_create_file(&intf->dev, &dev_attr_hardware)) | ||
|  | 		dev_err(&intf->dev, | ||
|  | 			"Couldn't create device file for hardware\n"); | ||
|  | 
 | ||
|  | 	if (device_create_file(&intf->dev, &dev_attr_nets)) | ||
|  | 		dev_err(&intf->dev, | ||
|  | 			"Couldn't create device file for nets\n"); | ||
|  | 
 | ||
|  | 	/* do per device probing */ | ||
|  | 	for (i = 0; i < dev->net_count; i++) | ||
|  | 		esd_usb2_probe_one_net(intf, i); | ||
|  | 
 | ||
|  | 	return 0; | ||
|  | 
 | ||
|  | free_dev: | ||
|  | 	kfree(dev); | ||
|  | done: | ||
|  | 	return err; | ||
|  | } | ||
|  | 
 | ||
|  | /*
 | ||
|  |  * called by the usb core when the device is removed from the system | ||
|  |  */ | ||
|  | static void esd_usb2_disconnect(struct usb_interface *intf) | ||
|  | { | ||
|  | 	struct esd_usb2 *dev = usb_get_intfdata(intf); | ||
|  | 	struct net_device *netdev; | ||
|  | 	int i; | ||
|  | 
 | ||
|  | 	device_remove_file(&intf->dev, &dev_attr_firmware); | ||
|  | 	device_remove_file(&intf->dev, &dev_attr_hardware); | ||
|  | 	device_remove_file(&intf->dev, &dev_attr_nets); | ||
|  | 
 | ||
|  | 	usb_set_intfdata(intf, NULL); | ||
|  | 
 | ||
|  | 	if (dev) { | ||
|  | 		for (i = 0; i < dev->net_count; i++) { | ||
|  | 			if (dev->nets[i]) { | ||
|  | 				netdev = dev->nets[i]->netdev; | ||
|  | 				unregister_netdev(netdev); | ||
|  | 				free_candev(netdev); | ||
|  | 			} | ||
|  | 		} | ||
|  | 		unlink_all_urbs(dev); | ||
|  | 	} | ||
|  | } | ||
|  | 
 | ||
|  | /* usb specific object needed to register this driver with the usb subsystem */ | ||
|  | static struct usb_driver esd_usb2_driver = { | ||
|  | 	.name = "esd_usb2", | ||
|  | 	.probe = esd_usb2_probe, | ||
|  | 	.disconnect = esd_usb2_disconnect, | ||
|  | 	.id_table = esd_usb2_table, | ||
|  | }; | ||
|  | 
 | ||
|  | static int __init esd_usb2_init(void) | ||
|  | { | ||
|  | 	int err; | ||
|  | 
 | ||
|  | 	/* register this driver with the USB subsystem */ | ||
|  | 	err = usb_register(&esd_usb2_driver); | ||
|  | 
 | ||
|  | 	if (err) { | ||
|  | 		err("usb_register failed. Error number %d\n", err); | ||
|  | 		return err; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	return 0; | ||
|  | } | ||
|  | module_init(esd_usb2_init); | ||
|  | 
 | ||
|  | static void __exit esd_usb2_exit(void) | ||
|  | { | ||
|  | 	/* deregister this driver with the USB subsystem */ | ||
|  | 	usb_deregister(&esd_usb2_driver); | ||
|  | } | ||
|  | module_exit(esd_usb2_exit); |