517 lines
		
	
	
	
		
			13 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
		
		
			
		
	
	
			517 lines
		
	
	
	
		
			13 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
|   | /*
 | ||
|  |  *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de> | ||
|  |  *  JZ4740 SoC NAND controller driver | ||
|  |  * | ||
|  |  *  This program is free software; you can redistribute it and/or modify it | ||
|  |  *  under  the terms of the GNU General  Public License as published by the | ||
|  |  *  Free Software Foundation;  either version 2 of the License, or (at your | ||
|  |  *  option) any later version. | ||
|  |  * | ||
|  |  *  You should have received a copy of the GNU General Public License along | ||
|  |  *  with this program; if not, write to the Free Software Foundation, Inc., | ||
|  |  *  675 Mass Ave, Cambridge, MA 02139, USA. | ||
|  |  * | ||
|  |  */ | ||
|  | 
 | ||
|  | #include <linux/ioport.h>
 | ||
|  | #include <linux/kernel.h>
 | ||
|  | #include <linux/module.h>
 | ||
|  | #include <linux/platform_device.h>
 | ||
|  | #include <linux/slab.h>
 | ||
|  | 
 | ||
|  | #include <linux/mtd/mtd.h>
 | ||
|  | #include <linux/mtd/nand.h>
 | ||
|  | #include <linux/mtd/partitions.h>
 | ||
|  | 
 | ||
|  | #include <linux/gpio.h>
 | ||
|  | 
 | ||
|  | #include <asm/mach-jz4740/jz4740_nand.h>
 | ||
|  | 
 | ||
|  | #define JZ_REG_NAND_CTRL	0x50
 | ||
|  | #define JZ_REG_NAND_ECC_CTRL	0x100
 | ||
|  | #define JZ_REG_NAND_DATA	0x104
 | ||
|  | #define JZ_REG_NAND_PAR0	0x108
 | ||
|  | #define JZ_REG_NAND_PAR1	0x10C
 | ||
|  | #define JZ_REG_NAND_PAR2	0x110
 | ||
|  | #define JZ_REG_NAND_IRQ_STAT	0x114
 | ||
|  | #define JZ_REG_NAND_IRQ_CTRL	0x118
 | ||
|  | #define JZ_REG_NAND_ERR(x)	(0x11C + ((x) << 2))
 | ||
|  | 
 | ||
|  | #define JZ_NAND_ECC_CTRL_PAR_READY	BIT(4)
 | ||
|  | #define JZ_NAND_ECC_CTRL_ENCODING	BIT(3)
 | ||
|  | #define JZ_NAND_ECC_CTRL_RS		BIT(2)
 | ||
|  | #define JZ_NAND_ECC_CTRL_RESET		BIT(1)
 | ||
|  | #define JZ_NAND_ECC_CTRL_ENABLE		BIT(0)
 | ||
|  | 
 | ||
|  | #define JZ_NAND_STATUS_ERR_COUNT	(BIT(31) | BIT(30) | BIT(29))
 | ||
|  | #define JZ_NAND_STATUS_PAD_FINISH	BIT(4)
 | ||
|  | #define JZ_NAND_STATUS_DEC_FINISH	BIT(3)
 | ||
|  | #define JZ_NAND_STATUS_ENC_FINISH	BIT(2)
 | ||
|  | #define JZ_NAND_STATUS_UNCOR_ERROR	BIT(1)
 | ||
|  | #define JZ_NAND_STATUS_ERROR		BIT(0)
 | ||
|  | 
 | ||
|  | #define JZ_NAND_CTRL_ENABLE_CHIP(x) BIT((x) << 1)
 | ||
|  | #define JZ_NAND_CTRL_ASSERT_CHIP(x) BIT(((x) << 1) + 1)
 | ||
|  | 
 | ||
|  | #define JZ_NAND_MEM_ADDR_OFFSET 0x10000
 | ||
|  | #define JZ_NAND_MEM_CMD_OFFSET 0x08000
 | ||
|  | 
 | ||
|  | struct jz_nand { | ||
|  | 	struct mtd_info mtd; | ||
|  | 	struct nand_chip chip; | ||
|  | 	void __iomem *base; | ||
|  | 	struct resource *mem; | ||
|  | 
 | ||
|  | 	void __iomem *bank_base; | ||
|  | 	struct resource *bank_mem; | ||
|  | 
 | ||
|  | 	struct jz_nand_platform_data *pdata; | ||
|  | 	bool is_reading; | ||
|  | }; | ||
|  | 
 | ||
|  | static inline struct jz_nand *mtd_to_jz_nand(struct mtd_info *mtd) | ||
|  | { | ||
|  | 	return container_of(mtd, struct jz_nand, mtd); | ||
|  | } | ||
|  | 
 | ||
|  | static void jz_nand_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl) | ||
|  | { | ||
|  | 	struct jz_nand *nand = mtd_to_jz_nand(mtd); | ||
|  | 	struct nand_chip *chip = mtd->priv; | ||
|  | 	uint32_t reg; | ||
|  | 
 | ||
|  | 	if (ctrl & NAND_CTRL_CHANGE) { | ||
|  | 		BUG_ON((ctrl & NAND_ALE) && (ctrl & NAND_CLE)); | ||
|  | 		if (ctrl & NAND_ALE) | ||
|  | 			chip->IO_ADDR_W = nand->bank_base + JZ_NAND_MEM_ADDR_OFFSET; | ||
|  | 		else if (ctrl & NAND_CLE) | ||
|  | 			chip->IO_ADDR_W = nand->bank_base + JZ_NAND_MEM_CMD_OFFSET; | ||
|  | 		else | ||
|  | 			chip->IO_ADDR_W = nand->bank_base; | ||
|  | 
 | ||
|  | 		reg = readl(nand->base + JZ_REG_NAND_CTRL); | ||
|  | 		if (ctrl & NAND_NCE) | ||
|  | 			reg |= JZ_NAND_CTRL_ASSERT_CHIP(0); | ||
|  | 		else | ||
|  | 			reg &= ~JZ_NAND_CTRL_ASSERT_CHIP(0); | ||
|  | 		writel(reg, nand->base + JZ_REG_NAND_CTRL); | ||
|  | 	} | ||
|  | 	if (dat != NAND_CMD_NONE) | ||
|  | 		writeb(dat, chip->IO_ADDR_W); | ||
|  | } | ||
|  | 
 | ||
|  | static int jz_nand_dev_ready(struct mtd_info *mtd) | ||
|  | { | ||
|  | 	struct jz_nand *nand = mtd_to_jz_nand(mtd); | ||
|  | 	return gpio_get_value_cansleep(nand->pdata->busy_gpio); | ||
|  | } | ||
|  | 
 | ||
|  | static void jz_nand_hwctl(struct mtd_info *mtd, int mode) | ||
|  | { | ||
|  | 	struct jz_nand *nand = mtd_to_jz_nand(mtd); | ||
|  | 	uint32_t reg; | ||
|  | 
 | ||
|  | 	writel(0, nand->base + JZ_REG_NAND_IRQ_STAT); | ||
|  | 	reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL); | ||
|  | 
 | ||
|  | 	reg |= JZ_NAND_ECC_CTRL_RESET; | ||
|  | 	reg |= JZ_NAND_ECC_CTRL_ENABLE; | ||
|  | 	reg |= JZ_NAND_ECC_CTRL_RS; | ||
|  | 
 | ||
|  | 	switch (mode) { | ||
|  | 	case NAND_ECC_READ: | ||
|  | 		reg &= ~JZ_NAND_ECC_CTRL_ENCODING; | ||
|  | 		nand->is_reading = true; | ||
|  | 		break; | ||
|  | 	case NAND_ECC_WRITE: | ||
|  | 		reg |= JZ_NAND_ECC_CTRL_ENCODING; | ||
|  | 		nand->is_reading = false; | ||
|  | 		break; | ||
|  | 	default: | ||
|  | 		break; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL); | ||
|  | } | ||
|  | 
 | ||
|  | static int jz_nand_calculate_ecc_rs(struct mtd_info *mtd, const uint8_t *dat, | ||
|  | 	uint8_t *ecc_code) | ||
|  | { | ||
|  | 	struct jz_nand *nand = mtd_to_jz_nand(mtd); | ||
|  | 	uint32_t reg, status; | ||
|  | 	int i; | ||
|  | 	unsigned int timeout = 1000; | ||
|  | 	static uint8_t empty_block_ecc[] = {0xcd, 0x9d, 0x90, 0x58, 0xf4, | ||
|  | 						0x8b, 0xff, 0xb7, 0x6f}; | ||
|  | 
 | ||
|  | 	if (nand->is_reading) | ||
|  | 		return 0; | ||
|  | 
 | ||
|  | 	do { | ||
|  | 		status = readl(nand->base + JZ_REG_NAND_IRQ_STAT); | ||
|  | 	} while (!(status & JZ_NAND_STATUS_ENC_FINISH) && --timeout); | ||
|  | 
 | ||
|  | 	if (timeout == 0) | ||
|  | 	    return -1; | ||
|  | 
 | ||
|  | 	reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL); | ||
|  | 	reg &= ~JZ_NAND_ECC_CTRL_ENABLE; | ||
|  | 	writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL); | ||
|  | 
 | ||
|  | 	for (i = 0; i < 9; ++i) | ||
|  | 		ecc_code[i] = readb(nand->base + JZ_REG_NAND_PAR0 + i); | ||
|  | 
 | ||
|  | 	/* If the written data is completly 0xff, we also want to write 0xff as
 | ||
|  | 	 * ecc, otherwise we will get in trouble when doing subpage writes. */ | ||
|  | 	if (memcmp(ecc_code, empty_block_ecc, 9) == 0) | ||
|  | 		memset(ecc_code, 0xff, 9); | ||
|  | 
 | ||
|  | 	return 0; | ||
|  | } | ||
|  | 
 | ||
|  | static void jz_nand_correct_data(uint8_t *dat, int index, int mask) | ||
|  | { | ||
|  | 	int offset = index & 0x7; | ||
|  | 	uint16_t data; | ||
|  | 
 | ||
|  | 	index += (index >> 3); | ||
|  | 
 | ||
|  | 	data = dat[index]; | ||
|  | 	data |= dat[index+1] << 8; | ||
|  | 
 | ||
|  | 	mask ^= (data >> offset) & 0x1ff; | ||
|  | 	data &= ~(0x1ff << offset); | ||
|  | 	data |= (mask << offset); | ||
|  | 
 | ||
|  | 	dat[index] = data & 0xff; | ||
|  | 	dat[index+1] = (data >> 8) & 0xff; | ||
|  | } | ||
|  | 
 | ||
|  | static int jz_nand_correct_ecc_rs(struct mtd_info *mtd, uint8_t *dat, | ||
|  | 	uint8_t *read_ecc, uint8_t *calc_ecc) | ||
|  | { | ||
|  | 	struct jz_nand *nand = mtd_to_jz_nand(mtd); | ||
|  | 	int i, error_count, index; | ||
|  | 	uint32_t reg, status, error; | ||
|  | 	uint32_t t; | ||
|  | 	unsigned int timeout = 1000; | ||
|  | 
 | ||
|  | 	t = read_ecc[0]; | ||
|  | 
 | ||
|  | 	if (t == 0xff) { | ||
|  | 		for (i = 1; i < 9; ++i) | ||
|  | 			t &= read_ecc[i]; | ||
|  | 
 | ||
|  | 		t &= dat[0]; | ||
|  | 		t &= dat[nand->chip.ecc.size / 2]; | ||
|  | 		t &= dat[nand->chip.ecc.size - 1]; | ||
|  | 
 | ||
|  | 		if (t == 0xff) { | ||
|  | 			for (i = 1; i < nand->chip.ecc.size - 1; ++i) | ||
|  | 				t &= dat[i]; | ||
|  | 			if (t == 0xff) | ||
|  | 				return 0; | ||
|  | 		} | ||
|  | 	} | ||
|  | 
 | ||
|  | 	for (i = 0; i < 9; ++i) | ||
|  | 		writeb(read_ecc[i], nand->base + JZ_REG_NAND_PAR0 + i); | ||
|  | 
 | ||
|  | 	reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL); | ||
|  | 	reg |= JZ_NAND_ECC_CTRL_PAR_READY; | ||
|  | 	writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL); | ||
|  | 
 | ||
|  | 	do { | ||
|  | 		status = readl(nand->base + JZ_REG_NAND_IRQ_STAT); | ||
|  | 	} while (!(status & JZ_NAND_STATUS_DEC_FINISH) && --timeout); | ||
|  | 
 | ||
|  | 	if (timeout == 0) | ||
|  | 	    return -1; | ||
|  | 
 | ||
|  | 	reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL); | ||
|  | 	reg &= ~JZ_NAND_ECC_CTRL_ENABLE; | ||
|  | 	writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL); | ||
|  | 
 | ||
|  | 	if (status & JZ_NAND_STATUS_ERROR) { | ||
|  | 		if (status & JZ_NAND_STATUS_UNCOR_ERROR) | ||
|  | 			return -1; | ||
|  | 
 | ||
|  | 		error_count = (status & JZ_NAND_STATUS_ERR_COUNT) >> 29; | ||
|  | 
 | ||
|  | 		for (i = 0; i < error_count; ++i) { | ||
|  | 			error = readl(nand->base + JZ_REG_NAND_ERR(i)); | ||
|  | 			index = ((error >> 16) & 0x1ff) - 1; | ||
|  | 			if (index >= 0 && index < 512) | ||
|  | 				jz_nand_correct_data(dat, index, error & 0x1ff); | ||
|  | 		} | ||
|  | 
 | ||
|  | 		return error_count; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	return 0; | ||
|  | } | ||
|  | 
 | ||
|  | 
 | ||
|  | /* Copy paste of nand_read_page_hwecc_oob_first except for different eccpos
 | ||
|  |  * handling. The ecc area is for 4k chips 72 bytes long and thus does not fit | ||
|  |  * into the eccpos array. */ | ||
|  | static int jz_nand_read_page_hwecc_oob_first(struct mtd_info *mtd, | ||
|  | 	struct nand_chip *chip, uint8_t *buf, int page) | ||
|  | { | ||
|  | 	int i, eccsize = chip->ecc.size; | ||
|  | 	int eccbytes = chip->ecc.bytes; | ||
|  | 	int eccsteps = chip->ecc.steps; | ||
|  | 	uint8_t *p = buf; | ||
|  | 	unsigned int ecc_offset = chip->page_shift; | ||
|  | 
 | ||
|  | 	/* Read the OOB area first */ | ||
|  | 	chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); | ||
|  | 	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); | ||
|  | 	chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); | ||
|  | 
 | ||
|  | 	for (i = ecc_offset; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { | ||
|  | 		int stat; | ||
|  | 
 | ||
|  | 		chip->ecc.hwctl(mtd, NAND_ECC_READ); | ||
|  | 		chip->read_buf(mtd, p, eccsize); | ||
|  | 
 | ||
|  | 		stat = chip->ecc.correct(mtd, p, &chip->oob_poi[i], NULL); | ||
|  | 		if (stat < 0) | ||
|  | 			mtd->ecc_stats.failed++; | ||
|  | 		else | ||
|  | 			mtd->ecc_stats.corrected += stat; | ||
|  | 	} | ||
|  | 	return 0; | ||
|  | } | ||
|  | 
 | ||
|  | /* Copy-and-paste of nand_write_page_hwecc with different eccpos handling. */ | ||
|  | static void jz_nand_write_page_hwecc(struct mtd_info *mtd, | ||
|  | 	struct nand_chip *chip, const uint8_t *buf) | ||
|  | { | ||
|  | 	int i, eccsize = chip->ecc.size; | ||
|  | 	int eccbytes = chip->ecc.bytes; | ||
|  | 	int eccsteps = chip->ecc.steps; | ||
|  | 	const uint8_t *p = buf; | ||
|  | 	unsigned int ecc_offset = chip->page_shift; | ||
|  | 
 | ||
|  | 	for (i = ecc_offset; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { | ||
|  | 		chip->ecc.hwctl(mtd, NAND_ECC_WRITE); | ||
|  | 		chip->write_buf(mtd, p, eccsize); | ||
|  | 		chip->ecc.calculate(mtd, p, &chip->oob_poi[i]); | ||
|  | 	} | ||
|  | 
 | ||
|  | 	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); | ||
|  | } | ||
|  | 
 | ||
|  | #ifdef CONFIG_MTD_CMDLINE_PARTS
 | ||
|  | static const char *part_probes[] = {"cmdline", NULL}; | ||
|  | #endif
 | ||
|  | 
 | ||
|  | static int jz_nand_ioremap_resource(struct platform_device *pdev, | ||
|  | 	const char *name, struct resource **res, void __iomem **base) | ||
|  | { | ||
|  | 	int ret; | ||
|  | 
 | ||
|  | 	*res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name); | ||
|  | 	if (!*res) { | ||
|  | 		dev_err(&pdev->dev, "Failed to get platform %s memory\n", name); | ||
|  | 		ret = -ENXIO; | ||
|  | 		goto err; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	*res = request_mem_region((*res)->start, resource_size(*res), | ||
|  | 				pdev->name); | ||
|  | 	if (!*res) { | ||
|  | 		dev_err(&pdev->dev, "Failed to request %s memory region\n", name); | ||
|  | 		ret = -EBUSY; | ||
|  | 		goto err; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	*base = ioremap((*res)->start, resource_size(*res)); | ||
|  | 	if (!*base) { | ||
|  | 		dev_err(&pdev->dev, "Failed to ioremap %s memory region\n", name); | ||
|  | 		ret = -EBUSY; | ||
|  | 		goto err_release_mem; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	return 0; | ||
|  | 
 | ||
|  | err_release_mem: | ||
|  | 	release_mem_region((*res)->start, resource_size(*res)); | ||
|  | err: | ||
|  | 	*res = NULL; | ||
|  | 	*base = NULL; | ||
|  | 	return ret; | ||
|  | } | ||
|  | 
 | ||
|  | static int __devinit jz_nand_probe(struct platform_device *pdev) | ||
|  | { | ||
|  | 	int ret; | ||
|  | 	struct jz_nand *nand; | ||
|  | 	struct nand_chip *chip; | ||
|  | 	struct mtd_info *mtd; | ||
|  | 	struct jz_nand_platform_data *pdata = pdev->dev.platform_data; | ||
|  | #ifdef CONFIG_MTD_PARTITIONS
 | ||
|  | 	struct mtd_partition *partition_info; | ||
|  | 	int num_partitions = 0; | ||
|  | #endif
 | ||
|  | 
 | ||
|  | 	nand = kzalloc(sizeof(*nand), GFP_KERNEL); | ||
|  | 	if (!nand) { | ||
|  | 		dev_err(&pdev->dev, "Failed to allocate device structure.\n"); | ||
|  | 		return -ENOMEM; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	ret = jz_nand_ioremap_resource(pdev, "mmio", &nand->mem, &nand->base); | ||
|  | 	if (ret) | ||
|  | 		goto err_free; | ||
|  | 	ret = jz_nand_ioremap_resource(pdev, "bank", &nand->bank_mem, | ||
|  | 			&nand->bank_base); | ||
|  | 	if (ret) | ||
|  | 		goto err_iounmap_mmio; | ||
|  | 
 | ||
|  | 	if (pdata && gpio_is_valid(pdata->busy_gpio)) { | ||
|  | 		ret = gpio_request(pdata->busy_gpio, "NAND busy pin"); | ||
|  | 		if (ret) { | ||
|  | 			dev_err(&pdev->dev, | ||
|  | 				"Failed to request busy gpio %d: %d\n", | ||
|  | 				pdata->busy_gpio, ret); | ||
|  | 			goto err_iounmap_mem; | ||
|  | 		} | ||
|  | 	} | ||
|  | 
 | ||
|  | 	mtd		= &nand->mtd; | ||
|  | 	chip		= &nand->chip; | ||
|  | 	mtd->priv	= chip; | ||
|  | 	mtd->owner	= THIS_MODULE; | ||
|  | 	mtd->name	= "jz4740-nand"; | ||
|  | 
 | ||
|  | 	chip->ecc.hwctl		= jz_nand_hwctl; | ||
|  | 	chip->ecc.calculate	= jz_nand_calculate_ecc_rs; | ||
|  | 	chip->ecc.correct	= jz_nand_correct_ecc_rs; | ||
|  | 	chip->ecc.mode		= NAND_ECC_HW_OOB_FIRST; | ||
|  | 	chip->ecc.size		= 512; | ||
|  | 	chip->ecc.bytes		= 9; | ||
|  | 
 | ||
|  | 	chip->ecc.read_page	= jz_nand_read_page_hwecc_oob_first; | ||
|  | 	chip->ecc.write_page	= jz_nand_write_page_hwecc; | ||
|  | 
 | ||
|  | 	if (pdata) | ||
|  | 		chip->ecc.layout = pdata->ecc_layout; | ||
|  | 
 | ||
|  | 	chip->chip_delay = 50; | ||
|  | 	chip->cmd_ctrl = jz_nand_cmd_ctrl; | ||
|  | 
 | ||
|  | 	if (pdata && gpio_is_valid(pdata->busy_gpio)) | ||
|  | 		chip->dev_ready = jz_nand_dev_ready; | ||
|  | 
 | ||
|  | 	chip->IO_ADDR_R = nand->bank_base; | ||
|  | 	chip->IO_ADDR_W = nand->bank_base; | ||
|  | 
 | ||
|  | 	nand->pdata = pdata; | ||
|  | 	platform_set_drvdata(pdev, nand); | ||
|  | 
 | ||
|  | 	writel(JZ_NAND_CTRL_ENABLE_CHIP(0), nand->base + JZ_REG_NAND_CTRL); | ||
|  | 
 | ||
|  | 	ret = nand_scan_ident(mtd, 1, NULL); | ||
|  | 	if (ret) { | ||
|  | 		dev_err(&pdev->dev,  "Failed to scan nand\n"); | ||
|  | 		goto err_gpio_free; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	if (pdata && pdata->ident_callback) { | ||
|  | 		pdata->ident_callback(pdev, chip, &pdata->partitions, | ||
|  | 					&pdata->num_partitions); | ||
|  | 	} | ||
|  | 
 | ||
|  | 	ret = nand_scan_tail(mtd); | ||
|  | 	if (ret) { | ||
|  | 		dev_err(&pdev->dev,  "Failed to scan nand\n"); | ||
|  | 		goto err_gpio_free; | ||
|  | 	} | ||
|  | 
 | ||
|  | #ifdef CONFIG_MTD_PARTITIONS
 | ||
|  | #ifdef CONFIG_MTD_CMDLINE_PARTS
 | ||
|  | 	num_partitions = parse_mtd_partitions(mtd, part_probes, | ||
|  | 						&partition_info, 0); | ||
|  | #endif
 | ||
|  | 	if (num_partitions <= 0 && pdata) { | ||
|  | 		num_partitions = pdata->num_partitions; | ||
|  | 		partition_info = pdata->partitions; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	if (num_partitions > 0) | ||
|  | 		ret = add_mtd_partitions(mtd, partition_info, num_partitions); | ||
|  | 	else | ||
|  | #endif
 | ||
|  | 	ret = add_mtd_device(mtd); | ||
|  | 
 | ||
|  | 	if (ret) { | ||
|  | 		dev_err(&pdev->dev, "Failed to add mtd device\n"); | ||
|  | 		goto err_nand_release; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	dev_info(&pdev->dev, "Successfully registered JZ4740 NAND driver\n"); | ||
|  | 
 | ||
|  | 	return 0; | ||
|  | 
 | ||
|  | err_nand_release: | ||
|  | 	nand_release(&nand->mtd); | ||
|  | err_gpio_free: | ||
|  | 	platform_set_drvdata(pdev, NULL); | ||
|  | 	gpio_free(pdata->busy_gpio); | ||
|  | err_iounmap_mem: | ||
|  | 	iounmap(nand->bank_base); | ||
|  | err_iounmap_mmio: | ||
|  | 	iounmap(nand->base); | ||
|  | err_free: | ||
|  | 	kfree(nand); | ||
|  | 	return ret; | ||
|  | } | ||
|  | 
 | ||
|  | static int __devexit jz_nand_remove(struct platform_device *pdev) | ||
|  | { | ||
|  | 	struct jz_nand *nand = platform_get_drvdata(pdev); | ||
|  | 
 | ||
|  | 	nand_release(&nand->mtd); | ||
|  | 
 | ||
|  | 	/* Deassert and disable all chips */ | ||
|  | 	writel(0, nand->base + JZ_REG_NAND_CTRL); | ||
|  | 
 | ||
|  | 	iounmap(nand->bank_base); | ||
|  | 	release_mem_region(nand->bank_mem->start, resource_size(nand->bank_mem)); | ||
|  | 	iounmap(nand->base); | ||
|  | 	release_mem_region(nand->mem->start, resource_size(nand->mem)); | ||
|  | 
 | ||
|  | 	platform_set_drvdata(pdev, NULL); | ||
|  | 	kfree(nand); | ||
|  | 
 | ||
|  | 	return 0; | ||
|  | } | ||
|  | 
 | ||
|  | struct platform_driver jz_nand_driver = { | ||
|  | 	.probe = jz_nand_probe, | ||
|  | 	.remove = __devexit_p(jz_nand_remove), | ||
|  | 	.driver = { | ||
|  | 		.name = "jz4740-nand", | ||
|  | 		.owner = THIS_MODULE, | ||
|  | 	}, | ||
|  | }; | ||
|  | 
 | ||
|  | static int __init jz_nand_init(void) | ||
|  | { | ||
|  | 	return platform_driver_register(&jz_nand_driver); | ||
|  | } | ||
|  | module_init(jz_nand_init); | ||
|  | 
 | ||
|  | static void __exit jz_nand_exit(void) | ||
|  | { | ||
|  | 	platform_driver_unregister(&jz_nand_driver); | ||
|  | } | ||
|  | module_exit(jz_nand_exit); | ||
|  | 
 | ||
|  | MODULE_LICENSE("GPL"); | ||
|  | MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); | ||
|  | MODULE_DESCRIPTION("NAND controller driver for JZ4740 SoC"); | ||
|  | MODULE_ALIAS("platform:jz4740-nand"); |