| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | /*
 | 
					
						
							|  |  |  |  * Copyright (C) 2006 Atmel Corporation | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * This program is free software; you can redistribute it and/or modify | 
					
						
							|  |  |  |  * it under the terms of the GNU General Public License version 2 as | 
					
						
							|  |  |  |  * published by the Free Software Foundation. | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #include <linux/clk.h>
 | 
					
						
							|  |  |  | #include <linux/err.h>
 | 
					
						
							|  |  |  | #include <linux/init.h>
 | 
					
						
							|  |  |  | #include <linux/platform_device.h>
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static int __init pdc_probe(struct platform_device *pdev) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct clk *pclk, *hclk; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	pclk = clk_get(&pdev->dev, "pclk"); | 
					
						
							|  |  |  | 	if (IS_ERR(pclk)) { | 
					
						
							|  |  |  | 		dev_err(&pdev->dev, "no pclk defined\n"); | 
					
						
							|  |  |  | 		return PTR_ERR(pclk); | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 	hclk = clk_get(&pdev->dev, "hclk"); | 
					
						
							|  |  |  | 	if (IS_ERR(hclk)) { | 
					
						
							|  |  |  | 		dev_err(&pdev->dev, "no hclk defined\n"); | 
					
						
							|  |  |  | 		clk_put(pclk); | 
					
						
							|  |  |  | 		return PTR_ERR(hclk); | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	clk_enable(pclk); | 
					
						
							|  |  |  | 	clk_enable(hclk); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	dev_info(&pdev->dev, "Atmel Peripheral DMA Controller enabled\n"); | 
					
						
							|  |  |  | 	return 0; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static struct platform_driver pdc_driver = { | 
					
						
							|  |  |  | 	.driver		= { | 
					
						
							|  |  |  | 		.name	= "pdc", | 
					
						
							|  |  |  | 	}, | 
					
						
							|  |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static int __init pdc_init(void) | 
					
						
							|  |  |  | { | 
					
						
							| 
									
										
										
										
											2008-09-21 23:52:08 +02:00
										 |  |  | 	return platform_driver_probe(&pdc_driver, pdc_probe); | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | } | 
					
						
							|  |  |  | arch_initcall(pdc_init); |