| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | /*
 | 
					
						
							|  |  |  |  * Clock management for AT32AP CPUs | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * Copyright (C) 2006 Atmel Corporation | 
					
						
							|  |  |  |  * | 
					
						
							| 
									
										
										
										
											2007-02-05 11:42:07 +01:00
										 |  |  |  * Based on arch/arm/mach-at91/clock.c | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  |  *   Copyright (C) 2005 David Brownell | 
					
						
							|  |  |  |  *   Copyright (C) 2005 Ivan Kokshaysky | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * This program is free software; you can redistribute it and/or modify | 
					
						
							|  |  |  |  * it under the terms of the GNU General Public License version 2 as | 
					
						
							|  |  |  |  * published by the Free Software Foundation. | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | #include <linux/clk.h>
 | 
					
						
							|  |  |  | #include <linux/err.h>
 | 
					
						
							|  |  |  | #include <linux/device.h>
 | 
					
						
							|  |  |  | #include <linux/string.h>
 | 
					
						
							| 
									
										
										
										
											2008-09-22 21:40:55 +02:00
										 |  |  | #include <linux/list.h>
 | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2008-07-31 16:06:58 +02:00
										 |  |  | #include <mach/chip.h>
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | #include "clock.h"
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2008-09-22 21:40:55 +02:00
										 |  |  | /* at32 clock list */ | 
					
						
							|  |  |  | static LIST_HEAD(at32_clock_list); | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2007-04-29 16:10:34 +00:00
										 |  |  | static DEFINE_SPINLOCK(clk_lock); | 
					
						
							| 
									
										
										
										
											2008-09-22 21:40:55 +02:00
										 |  |  | static DEFINE_SPINLOCK(clk_list_lock); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | void at32_clk_register(struct clk *clk) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	spin_lock(&clk_list_lock); | 
					
						
							|  |  |  | 	/* add the new item to the end of the list */ | 
					
						
							|  |  |  | 	list_add_tail(&clk->list, &at32_clock_list); | 
					
						
							|  |  |  | 	spin_unlock(&clk_list_lock); | 
					
						
							|  |  |  | } | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 
 | 
					
						
							|  |  |  | struct clk *clk_get(struct device *dev, const char *id) | 
					
						
							|  |  |  | { | 
					
						
							| 
									
										
										
										
											2008-09-22 21:40:55 +02:00
										 |  |  | 	struct clk *clk; | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2008-09-22 21:40:55 +02:00
										 |  |  | 	spin_lock(&clk_list_lock); | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2008-09-22 21:40:55 +02:00
										 |  |  | 	list_for_each_entry(clk, &at32_clock_list, list) { | 
					
						
							|  |  |  | 		if (clk->dev == dev && strcmp(id, clk->name) == 0) { | 
					
						
							|  |  |  | 			spin_unlock(&clk_list_lock); | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 			return clk; | 
					
						
							| 
									
										
										
										
											2008-09-22 21:40:55 +02:00
										 |  |  | 		} | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2008-09-22 21:40:55 +02:00
										 |  |  | 	spin_unlock(&clk_list_lock); | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 	return ERR_PTR(-ENOENT); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | EXPORT_SYMBOL(clk_get); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | void clk_put(struct clk *clk) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	/* clocks are static for now, we can't free them */ | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | EXPORT_SYMBOL(clk_put); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static void __clk_enable(struct clk *clk) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	if (clk->parent) | 
					
						
							|  |  |  | 		__clk_enable(clk->parent); | 
					
						
							|  |  |  | 	if (clk->users++ == 0 && clk->mode) | 
					
						
							|  |  |  | 		clk->mode(clk, 1); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | int clk_enable(struct clk *clk) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	unsigned long flags; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	spin_lock_irqsave(&clk_lock, flags); | 
					
						
							|  |  |  | 	__clk_enable(clk); | 
					
						
							|  |  |  | 	spin_unlock_irqrestore(&clk_lock, flags); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return 0; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | EXPORT_SYMBOL(clk_enable); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static void __clk_disable(struct clk *clk) | 
					
						
							|  |  |  | { | 
					
						
							| 
									
										
										
										
											2007-02-16 13:19:47 +01:00
										 |  |  | 	if (clk->users == 0) { | 
					
						
							|  |  |  | 		printk(KERN_ERR "%s: mismatched disable\n", clk->name); | 
					
						
							|  |  |  | 		WARN_ON(1); | 
					
						
							|  |  |  | 		return; | 
					
						
							|  |  |  | 	} | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 
 | 
					
						
							|  |  |  | 	if (--clk->users == 0 && clk->mode) | 
					
						
							|  |  |  | 		clk->mode(clk, 0); | 
					
						
							|  |  |  | 	if (clk->parent) | 
					
						
							|  |  |  | 		__clk_disable(clk->parent); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | void clk_disable(struct clk *clk) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	unsigned long flags; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	spin_lock_irqsave(&clk_lock, flags); | 
					
						
							|  |  |  | 	__clk_disable(clk); | 
					
						
							|  |  |  | 	spin_unlock_irqrestore(&clk_lock, flags); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | EXPORT_SYMBOL(clk_disable); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | unsigned long clk_get_rate(struct clk *clk) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	unsigned long flags; | 
					
						
							|  |  |  | 	unsigned long rate; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	spin_lock_irqsave(&clk_lock, flags); | 
					
						
							|  |  |  | 	rate = clk->get_rate(clk); | 
					
						
							|  |  |  | 	spin_unlock_irqrestore(&clk_lock, flags); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return rate; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | EXPORT_SYMBOL(clk_get_rate); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | long clk_round_rate(struct clk *clk, unsigned long rate) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	unsigned long flags, actual_rate; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if (!clk->set_rate) | 
					
						
							|  |  |  | 		return -ENOSYS; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	spin_lock_irqsave(&clk_lock, flags); | 
					
						
							|  |  |  | 	actual_rate = clk->set_rate(clk, rate, 0); | 
					
						
							|  |  |  | 	spin_unlock_irqrestore(&clk_lock, flags); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return actual_rate; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | EXPORT_SYMBOL(clk_round_rate); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | int clk_set_rate(struct clk *clk, unsigned long rate) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	unsigned long flags; | 
					
						
							|  |  |  | 	long ret; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if (!clk->set_rate) | 
					
						
							|  |  |  | 		return -ENOSYS; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	spin_lock_irqsave(&clk_lock, flags); | 
					
						
							|  |  |  | 	ret = clk->set_rate(clk, rate, 1); | 
					
						
							|  |  |  | 	spin_unlock_irqrestore(&clk_lock, flags); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return (ret < 0) ? ret : 0; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | EXPORT_SYMBOL(clk_set_rate); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | int clk_set_parent(struct clk *clk, struct clk *parent) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	unsigned long flags; | 
					
						
							|  |  |  | 	int ret; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if (!clk->set_parent) | 
					
						
							|  |  |  | 		return -ENOSYS; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	spin_lock_irqsave(&clk_lock, flags); | 
					
						
							|  |  |  | 	ret = clk->set_parent(clk, parent); | 
					
						
							|  |  |  | 	spin_unlock_irqrestore(&clk_lock, flags); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return ret; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | EXPORT_SYMBOL(clk_set_parent); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | struct clk *clk_get_parent(struct clk *clk) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	return clk->parent; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | EXPORT_SYMBOL(clk_get_parent); | 
					
						
							| 
									
										
										
										
											2007-08-09 20:56:07 -07:00
										 |  |  | 
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #ifdef CONFIG_DEBUG_FS
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* /sys/kernel/debug/at32ap_clk */ | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #include <linux/io.h>
 | 
					
						
							|  |  |  | #include <linux/debugfs.h>
 | 
					
						
							|  |  |  | #include <linux/seq_file.h>
 | 
					
						
							|  |  |  | #include "pm.h"
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define	NEST_DELTA	2
 | 
					
						
							|  |  |  | #define	NEST_MAX	6
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | struct clkinf { | 
					
						
							|  |  |  | 	struct seq_file	*s; | 
					
						
							|  |  |  | 	unsigned	nest; | 
					
						
							|  |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static void | 
					
						
							|  |  |  | dump_clock(struct clk *parent, struct clkinf *r) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	unsigned	nest = r->nest; | 
					
						
							|  |  |  | 	char		buf[16 + NEST_MAX]; | 
					
						
							|  |  |  | 	struct clk	*clk; | 
					
						
							|  |  |  | 	unsigned	i; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	/* skip clocks coupled to devices that aren't registered */ | 
					
						
							| 
									
										
										
										
											2009-01-06 10:44:43 -08:00
										 |  |  | 	if (parent->dev && !dev_name(parent->dev) && !parent->users) | 
					
						
							| 
									
										
										
										
											2007-08-09 20:56:07 -07:00
										 |  |  | 		return; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	/* <nest spaces> name <pad to end> */ | 
					
						
							|  |  |  | 	memset(buf, ' ', sizeof(buf) - 1); | 
					
						
							|  |  |  | 	buf[sizeof(buf) - 1] = 0; | 
					
						
							|  |  |  | 	i = strlen(parent->name); | 
					
						
							|  |  |  | 	memcpy(buf + nest, parent->name, | 
					
						
							|  |  |  | 			min(i, (unsigned)(sizeof(buf) - 1 - nest))); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	seq_printf(r->s, "%s%c users=%2d %-3s %9ld Hz", | 
					
						
							|  |  |  | 		buf, parent->set_parent ? '*' : ' ', | 
					
						
							|  |  |  | 		parent->users, | 
					
						
							|  |  |  | 		parent->users ? "on" : "off",	/* NOTE: not-paranoid!! */ | 
					
						
							|  |  |  | 		clk_get_rate(parent)); | 
					
						
							|  |  |  | 	if (parent->dev) | 
					
						
							| 
									
										
										
										
											2009-01-06 10:44:43 -08:00
										 |  |  | 		seq_printf(r->s, ", for %s", dev_name(parent->dev)); | 
					
						
							| 
									
										
										
										
											2007-08-09 20:56:07 -07:00
										 |  |  | 	seq_printf(r->s, "\n"); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	/* cost of this scan is small, but not linear... */ | 
					
						
							|  |  |  | 	r->nest = nest + NEST_DELTA; | 
					
						
							| 
									
										
										
										
											2008-09-22 21:40:55 +02:00
										 |  |  | 
 | 
					
						
							|  |  |  | 	list_for_each_entry(clk, &at32_clock_list, list) { | 
					
						
							| 
									
										
										
										
											2007-08-09 20:56:07 -07:00
										 |  |  | 		if (clk->parent == parent) | 
					
						
							|  |  |  | 			dump_clock(clk, r); | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 	r->nest = nest; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static int clk_show(struct seq_file *s, void *unused) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct clkinf	r; | 
					
						
							|  |  |  | 	int		i; | 
					
						
							| 
									
										
										
										
											2008-09-22 21:40:55 +02:00
										 |  |  | 	struct clk 	*clk; | 
					
						
							| 
									
										
										
										
											2007-08-09 20:56:07 -07:00
										 |  |  | 
 | 
					
						
							|  |  |  | 	/* show all the power manager registers */ | 
					
						
							|  |  |  | 	seq_printf(s, "MCCTRL  = %8x\n", pm_readl(MCCTRL)); | 
					
						
							|  |  |  | 	seq_printf(s, "CKSEL   = %8x\n", pm_readl(CKSEL)); | 
					
						
							|  |  |  | 	seq_printf(s, "CPUMASK = %8x\n", pm_readl(CPU_MASK)); | 
					
						
							|  |  |  | 	seq_printf(s, "HSBMASK = %8x\n", pm_readl(HSB_MASK)); | 
					
						
							|  |  |  | 	seq_printf(s, "PBAMASK = %8x\n", pm_readl(PBA_MASK)); | 
					
						
							|  |  |  | 	seq_printf(s, "PBBMASK = %8x\n", pm_readl(PBB_MASK)); | 
					
						
							|  |  |  | 	seq_printf(s, "PLL0    = %8x\n", pm_readl(PLL0)); | 
					
						
							|  |  |  | 	seq_printf(s, "PLL1    = %8x\n", pm_readl(PLL1)); | 
					
						
							|  |  |  | 	seq_printf(s, "IMR     = %8x\n", pm_readl(IMR)); | 
					
						
							|  |  |  | 	for (i = 0; i < 8; i++) { | 
					
						
							|  |  |  | 		if (i == 5) | 
					
						
							|  |  |  | 			continue; | 
					
						
							|  |  |  | 		seq_printf(s, "GCCTRL%d = %8x\n", i, pm_readl(GCCTRL(i))); | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	seq_printf(s, "\n"); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	r.s = s; | 
					
						
							|  |  |  | 	r.nest = 0; | 
					
						
							| 
									
										
										
										
											2008-09-22 21:40:55 +02:00
										 |  |  | 	/* protected from changes on the list while dumping */ | 
					
						
							|  |  |  | 	spin_lock(&clk_list_lock); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	/* show clock tree as derived from the three oscillators */ | 
					
						
							|  |  |  | 	clk = clk_get(NULL, "osc32k"); | 
					
						
							|  |  |  | 	dump_clock(clk, &r); | 
					
						
							|  |  |  | 	clk_put(clk); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	clk = clk_get(NULL, "osc0"); | 
					
						
							|  |  |  | 	dump_clock(clk, &r); | 
					
						
							|  |  |  | 	clk_put(clk); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	clk = clk_get(NULL, "osc1"); | 
					
						
							|  |  |  | 	dump_clock(clk, &r); | 
					
						
							|  |  |  | 	clk_put(clk); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	spin_unlock(&clk_list_lock); | 
					
						
							| 
									
										
										
										
											2007-08-09 20:56:07 -07:00
										 |  |  | 
 | 
					
						
							|  |  |  | 	return 0; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static int clk_open(struct inode *inode, struct file *file) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	return single_open(file, clk_show, NULL); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static const struct file_operations clk_operations = { | 
					
						
							|  |  |  | 	.open		= clk_open, | 
					
						
							|  |  |  | 	.read		= seq_read, | 
					
						
							|  |  |  | 	.llseek		= seq_lseek, | 
					
						
							|  |  |  | 	.release	= single_release, | 
					
						
							|  |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static int __init clk_debugfs_init(void) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	(void) debugfs_create_file("at32ap_clk", S_IFREG | S_IRUGO, | 
					
						
							|  |  |  | 			NULL, NULL, &clk_operations); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return 0; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | postcore_initcall(clk_debugfs_init); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #endif
 |