linux-pinenote/drivers/iio/light/Makefile

#
# Makefile for IIO Light sensors
#

# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_ADJD_S311)		+= adjd_s311.o
obj-$(CONFIG_APDS9300)		+= apds9300.o
obj-$(CONFIG_CM32181)		+= cm32181.o
obj-$(CONFIG_CM36651)		+= cm36651.o
obj-$(CONFIG_GP2AP020A00F)	+= gp2ap020a00f.o
obj-$(CONFIG_HID_SENSOR_ALS)	+= hid-sensor-als.o
obj-$(CONFIG_HID_SENSOR_PROX)	+= hid-sensor-prox.o
obj-$(CONFIG_ISL29125)		+= isl29125.o
obj-$(CONFIG_SENSORS_LM3533)	+= lm3533-als.o
obj-$(CONFIG_LTR501)		+= ltr501.o
obj-$(CONFIG_SENSORS_TSL2563)	+= tsl2563.o
obj-$(CONFIG_TCS3414)		+= tcs3414.o
obj-$(CONFIG_TCS3472)		+= tcs3472.o
obj-$(CONFIG_TSL4531)		+= tsl4531.o
obj-$(CONFIG_VCNL4000)		+= vcnl4000.o
iio: add LM3533 ambient-light-sensor driver Add sub-driver for the ambient-light-sensor interface on National Semiconductor / TI LM3533 lighting power chips. The sensor interface can be used to control the LEDs and backlights of the chip through defining five light zones and three sets of corresponding output-current values. The driver provides raw and mean adc readings along with the current light zone through sysfs. A threshold event can be generated on zone changes. The ALS-control output values can be set per zone for the three current output channels. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2012-05-21 14:18:06 +02:00			`#`
			`# Makefile for IIO Light sensors`
			`#`

iio: Add a comment to about alphabetical order to Kconfigs and Makefiles Keeping Makefile and Kconfig entries in alphabetical order usually works better than just appending new entries at the end, since it reduces the amount of conflicts. This patch adds a comment to the IIO Kconfig and Makefile files to document that the entries should be kept in alphabetical order. Also reorder those entries which weren't in alphabetical order yet. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2013-07-15 08:45:00 +01:00			`# When adding new entries keep the list in alphabetical order`
iio: add adjd_s311 I2C digital color sensor driver sensor has 4 channels (10-bit each, R/G/B and clear), sensitivity and gain is controlled in the driver by ext_info integration_time and CHAN_INFO_HARDWAREGAIN driver supports triggered buffer and IIO_CHAN_INFO_RAW to get the sensor data v5: address comments by Jonathan Cameron * use macro for channel declaration * get timestamp right before measurement * cleanups v4: address comments by Lars-Peter Clausen * make sure trigger handler is exited with iio_trigger_notify_done() and IRQ_HANDLED * kfree()/kalloc() -> krealloc() v3: * fix warnings v2: address comments by Lars-Peter Clausen * buffer allocation now in update_scan_mode instead of in trigger handler * simplify trigger code (assume active_scan_mask is not empty, use for_each_set_bit, use iio_push_to_buffer) * reorder entry in Makefile and Kconfig * fix remove Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2012-07-10 22:32:00 +01:00			`obj-$(CONFIG_ADJD_S311) += adjd_s311.o`
iio: add APDS9300 ambilent light sensor driver This patch adds IIO driver for APDS9300 ambient light sensor (ALS). http://www.avagotech.com/docs/AV02-1077EN The driver allows to read raw data from ADC registers or calculate lux value. It also can handle threshold interrupt. Signed-off-by: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2013-07-22 14:11:00 +01:00			`obj-$(CONFIG_APDS9300) += apds9300.o`
iio: add Capella CM32181 ambient light sensor driver. Add Capella Microsystem CM32181 Ambient Light Sensor IIO driver. This driver will convert raw data to lux value under open-air condition. Change the calibscale based on the cover material. Signed-off-by: Kevin Tsai <ktsai@capellamicro.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2013-12-24 01:53:00 +00:00			`obj-$(CONFIG_CM32181) += cm32181.o`
iio: cm36651: Add CM36651 proximity/light sensor This patch adds a new driver for Capella CM36651 proximity and RGB sensor. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2013-10-17 03:22:00 +01:00			`obj-$(CONFIG_CM36651) += cm36651.o`
iio: gp2ap020a00f: Add a driver for the device Add a new driver for the ambient light/proximity sensor device. The driver exposes three channels: light_clear light_ir and proximity. It also supports triggered buffer, high and low ambient light threshold event and proximity detection events. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2013-09-09 16:23:00 +01:00			`obj-$(CONFIG_GP2AP020A00F) += gp2ap020a00f.o`
iio: Add a comment to about alphabetical order to Kconfigs and Makefiles Keeping Makefile and Kconfig entries in alphabetical order usually works better than just appending new entries at the end, since it reduces the amount of conflicts. This patch adds a comment to the IIO Kconfig and Makefile files to document that the entries should be kept in alphabetical order. Also reorder those entries which weren't in alphabetical order yet. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2013-07-15 08:45:00 +01:00			`obj-$(CONFIG_HID_SENSOR_ALS) += hid-sensor-als.o`
iio: hid-sensors: Added Proximity Sensor Driver Added usage id processing for Proximity (Human Presence). This uses IIO interfaces for triggered buffer to present data to user mode. This uses HID sensor framework for registering callback events from the sensor hub. Signed-off-by: Archana Patni <archana.patni@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2014-02-20 06:29:00 +00:00			`obj-$(CONFIG_HID_SENSOR_PROX) += hid-sensor-prox.o`
iio: Add Intersil isl29125 digital color light sensor driver datasheet: http://www.intersil.com/content/dam/Intersil/documents/isl2/isl29125.pdf Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2014-05-07 13:38:00 +01:00			`obj-$(CONFIG_ISL29125) += isl29125.o`
iio: add LM3533 ambient-light-sensor driver Add sub-driver for the ambient-light-sensor interface on National Semiconductor / TI LM3533 lighting power chips. The sensor interface can be used to control the LEDs and backlights of the chip through defining five light zones and three sets of corresponding output-current values. The driver provides raw and mean adc readings along with the current light zone through sysfs. A threshold event can be generated on zone changes. The ALS-control output values can be set per zone for the three current output channels. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2012-05-21 14:18:06 +02:00			`obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o`
iio: Add Lite-On ltr501 ambient light / proximity sensor driver combined ambient light (two channels) and proximity sensor with I2C interface; the ALS channels are visible+IR and IR datasheet is here http://optoelectronics.liteon.com/upload/download/DS86-2012-0006/P_100_LTR-501ALS-01_PrelimDS_ver1.1.pdf v3: * fix use of sizeof in _read_als() v2: (thanks to Lars-Peter Clausen) * cannot use devm_iio_device_register() due to cleanup order in _remove() * mutex around data wait/read * turn info message in _probe() into check for part number * change copyright year to 2014 Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2014-10-01 22:01:00 +01:00			`obj-$(CONFIG_LTR501) += ltr501.o`
iio:light:tsl2563 move out of staging This driver is simple, uses the latest interfaces and contains few if any controversial elements. All of its interfaces have been in place for a long time now. Hence let's move it out of staging. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Peter Meerwald <pmeerw@pmeerw.net> 2013-01-12 10:35:00 +00:00			`obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o`
iio: Add driver for AMS/TAOS tcs3414 digital color sensor 16-bit digital color sensor with red, green, blue and clear channel datasheet: http://ams.com/eng/content/download/250258/975997/TCS3414_Datasheet_EN_v1.pdf Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2014-05-07 13:38:00 +01:00			`obj-$(CONFIG_TCS3414) += tcs3414.o`
iio: Add tcs3472 color light sensor driver chip has four 16-bit channels for red, green, blue, clear color intensity; driver supports the TCS3x7x family of devices and was tested with a TCS34725 chip; further information here: http://www.ams.com/eng/Products/Light-Sensors/Color-Sensor/TCS34725 v2 (thanks to Jonathan Cameron): * drop dynamic buffer allocation, buffer is in tcs3472_data * limit sysfs output to PAGE_SIZE * check val2 == 0 when writing CALIBSCALE Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Jon Brenner <jon.brenner@ams.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2013-09-14 20:38:00 +01:00			`obj-$(CONFIG_TCS3472) += tcs3472.o`
iio: Add tsl4531 ambient light sensor driver driver for the TSL4531 family of 16-bit I2C ambient light sensors; information is here: http://www.ams.com/eng/Products/Light-Sensors/Ambient-Light-Sensor-ALS/TSL45315 the chip offers simple lux output v3 (thanks Lars-Peter Clausen): * add mutex to when updating integration time * fix chip ID checking * code cleanups v2: * rename to tsl4351 * use INT_TIME Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2013-09-08 16:20:00 +01:00			`obj-$(CONFIG_TSL4531) += tsl4531.o`
iio: add vcnl4000 combined ALS and proximity sensor minimal driver, no IR current control and proximity/event handling yet v5: * checkpatch warnings * increase msleep() to 20 ms when waiting for data ready as measurement/conversion can take up to 100 ms, 1 ms is too short v4 (address comments by Jonathan Cameron) * remove SENSORS_ prefix in Kconfig * change from IIO_INTENSITY to IIO_LIGHT * move from staging v3 (address comments by Shubhrajyoti Datta) * cleanup Kconfig entry * call I2C read/write functions directly v2 (address comments by Lars-Peter Clausen and Jonathan Cameron) * unify code for reading PS and AL data into parameterized _measure() function * limit wait for data to become ready within 20 tries * drop IIO_LIGHT channel, add SCALE to IIO_INTENSITY * drop extra string arguments used for logging purpose only Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2012-06-19 09:58:54 +02:00			`obj-$(CONFIG_VCNL4000) += vcnl4000.o`