linux-pinenote/arch/powerpc/platforms/embedded6xx/Makefile

#
# Makefile for the 6xx/7xx/7xxxx linux kernel.
#
obj-$(CONFIG_MPC7448HPC2)	+= mpc7448_hpc2.o
obj-$(CONFIG_LINKSTATION)	+= linkstation.o ls_uart.o
obj-$(CONFIG_STORCENTER)	+= storcenter.o
obj-$(CONFIG_PPC_HOLLY)		+= holly.o
obj-$(CONFIG_PPC_PRPMC2800)	+= prpmc2800.o
obj-$(CONFIG_PPC_C2K)		+= c2k.o
obj-$(CONFIG_USBGECKO_UDBG)	+= usbgecko_udbg.o
obj-$(CONFIG_GAMECUBE_COMMON)	+= flipper-pic.o
obj-$(CONFIG_GAMECUBE)		+= gamecube.o
obj-$(CONFIG_WII)		+= wii.o hlwd-pic.o
[POWERPC] Add general support for mpc7448hpc2 (Taiga) platform Add support for Freescale mpc7448 (Taiga) board support Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org> 2006-06-13 15:07:15 +08:00			`#`
			`# Makefile for the 6xx/7xx/7xxxx linux kernel.`
			`#`
			`obj-$(CONFIG_MPC7448HPC2) += mpc7448_hpc2.o`
[POWERPC] Linkstation / kurobox support Support for the Kurobox(HG)/LinkStation-I NAS systems by Buffalo Technology, should be also applicable to the PPC TeraStation family. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org> 2006-12-01 22:53:48 +01:00			`obj-$(CONFIG_LINKSTATION) += linkstation.o ls_uart.o`
[POWERPC] Add initial iomega StorCenter board port. Use cuImage bootwrapper until U-Boot port is completed. Derived heavily from Linkstation port. Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Andy Wilcox <andy@protium.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> 2008-01-23 12:42:50 -06:00			`obj-$(CONFIG_STORCENTER) += storcenter.o`
[POWERPC] Add support for 750CL Holly board Add PowerPC 750 Holly/Hickory platform support Signed-off-by: Stephen Winiecki <stevewin@us.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org> 2007-05-08 07:28:38 +10:00			`obj-$(CONFIG_PPC_HOLLY) += holly.o`
[POWERPC] Add arch/powerpc support for the Motorola PrPMC2800 This finally adds the PPC_PRPMC2800 Kconfig option, the board setup code (the setup and reset functions) and the defconfig, to support the Motorola PrPMC2800 platform. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Paul Mackerras <paulus@samba.org> 2007-05-12 10:58:43 +10:00			`obj-$(CONFIG_PPC_PRPMC2800) += prpmc2800.o`
powerpc: C2K board driver Support for the C2K cPCI Single Board Computer from GEFanuc (PowerPC MPC7448 with a Marvell MV64460 chipset). All features of the board are not supported yet, but the board boots, flash works, all Ethernet ports are working and PCI devices are all found (USB and SATA on PCI1 do not work yet). Part 3 of 5: driver for the board. At this time it is very generic and similar to its original, the driver for the prpmc2800. Signed-off-by: Remi Machet <rmachet@slac.stanford.edu> Signed-off-by: Paul Mackerras <paulus@samba.org> 2008-05-17 05:31:04 +10:00			`obj-$(CONFIG_PPC_C2K) += c2k.o`
powerpc: gamecube/wii: udbg support for usbgecko Add support for using the USB Gecko adapter via the udbg facility on the Nintendo GameCube and Wii video game consoles. The USB Gecko is a 3rd party memory card interface adapter that provides a EXI (External Interface) to USB serial converter. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 2009-12-12 06:31:40 +00:00			`obj-$(CONFIG_USBGECKO_UDBG) += usbgecko_udbg.o`
powerpc: gamecube/wii: flipper interrupt controller support Add support for the interrupt controller included in the "Flipper" chipset of the Nintendo GameCube video game console. The same interrupt controller is also present in the "Hollywood" chipset of the Nintendo Wii. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 2009-12-12 06:31:41 +00:00			`obj-$(CONFIG_GAMECUBE_COMMON) += flipper-pic.o`
powerpc: gamecube: platform support Add platform support for the Nintendo GameCube video game console. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 2009-12-12 06:31:42 +00:00			`obj-$(CONFIG_GAMECUBE) += gamecube.o`
powerpc: wii: platform support Add platform support for the Nintendo Wii video game console. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 2009-12-12 06:31:48 +00:00			`obj-$(CONFIG_WII) += wii.o hlwd-pic.o`