264 lines
		
	
	
	
		
			7.1 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
		
		
			
		
	
	
			264 lines
		
	
	
	
		
			7.1 KiB
			
		
	
	
	
		
			C
		
	
	
	
	
	
|   | /* linux/arch/arm/mach-exynos4/dev-ahci.c
 | ||
|  |  * | ||
|  |  * Copyright (c) 2011 Samsung Electronics Co., Ltd. | ||
|  |  *		http://www.samsung.com
 | ||
|  |  * | ||
|  |  * EXYNOS4 - AHCI support | ||
|  |  * | ||
|  |  * This program is free software; you can redistribute it and/or modify | ||
|  |  * it under the terms of the GNU General Public License version 2 as | ||
|  |  * published by the Free Software Foundation. | ||
|  |  */ | ||
|  | 
 | ||
|  | #include <linux/clk.h>
 | ||
|  | #include <linux/delay.h>
 | ||
|  | #include <linux/dma-mapping.h>
 | ||
|  | #include <linux/platform_device.h>
 | ||
|  | #include <linux/ahci_platform.h>
 | ||
|  | 
 | ||
|  | #include <plat/cpu.h>
 | ||
|  | 
 | ||
|  | #include <mach/irqs.h>
 | ||
|  | #include <mach/map.h>
 | ||
|  | #include <mach/regs-pmu.h>
 | ||
|  | 
 | ||
|  | /* PHY Control Register */ | ||
|  | #define SATA_CTRL0		0x0
 | ||
|  | /* PHY Link Control Register */ | ||
|  | #define SATA_CTRL1		0x4
 | ||
|  | /* PHY Status Register */ | ||
|  | #define SATA_PHY_STATUS		0x8
 | ||
|  | 
 | ||
|  | #define SATA_CTRL0_RX_DATA_VALID(x)	(x << 27)
 | ||
|  | #define SATA_CTRL0_SPEED_MODE		(1 << 26)
 | ||
|  | #define SATA_CTRL0_M_PHY_CAL		(1 << 19)
 | ||
|  | #define SATA_CTRL0_PHY_CMU_RST_N	(1 << 10)
 | ||
|  | #define SATA_CTRL0_M_PHY_LN_RST_N	(1 << 9)
 | ||
|  | #define SATA_CTRL0_PHY_POR_N		(1 << 8)
 | ||
|  | 
 | ||
|  | #define SATA_CTRL1_RST_PMALIVE_N	(1 << 8)
 | ||
|  | #define SATA_CTRL1_RST_RXOOB_N		(1 << 7)
 | ||
|  | #define SATA_CTRL1_RST_RX_N		(1 << 6)
 | ||
|  | #define SATA_CTRL1_RST_TX_N		(1 << 5)
 | ||
|  | 
 | ||
|  | #define SATA_PHY_STATUS_CMU_OK		(1 << 18)
 | ||
|  | #define SATA_PHY_STATUS_LANE_OK		(1 << 16)
 | ||
|  | 
 | ||
|  | #define LANE0		0x200
 | ||
|  | #define COM_LANE	0xA00
 | ||
|  | 
 | ||
|  | #define HOST_PORTS_IMPL	0xC
 | ||
|  | #define SCLK_SATA_FREQ	(67 * MHZ)
 | ||
|  | 
 | ||
|  | static void __iomem *phy_base, *phy_ctrl; | ||
|  | 
 | ||
|  | struct phy_reg { | ||
|  | 	u8	reg; | ||
|  | 	u8	val; | ||
|  | }; | ||
|  | 
 | ||
|  | /* SATA PHY setup */ | ||
|  | static const struct phy_reg exynos4_sataphy_cmu[] = { | ||
|  | 	{ 0x00, 0x06 }, { 0x02, 0x80 }, { 0x22, 0xa0 }, { 0x23, 0x42 }, | ||
|  | 	{ 0x2e, 0x04 }, { 0x2f, 0x50 }, { 0x30, 0x70 }, { 0x31, 0x02 }, | ||
|  | 	{ 0x32, 0x25 }, { 0x33, 0x40 }, { 0x34, 0x01 }, { 0x35, 0x40 }, | ||
|  | 	{ 0x61, 0x2e }, { 0x63, 0x5e }, { 0x65, 0x42 }, { 0x66, 0xd1 }, | ||
|  | 	{ 0x67, 0x20 }, { 0x68, 0x28 }, { 0x69, 0x78 }, { 0x6a, 0x04 }, | ||
|  | 	{ 0x6b, 0xc8 }, { 0x6c, 0x06 }, | ||
|  | }; | ||
|  | 
 | ||
|  | static const struct phy_reg exynos4_sataphy_lane[] = { | ||
|  | 	{ 0x00, 0x02 }, { 0x05, 0x10 }, { 0x06, 0x84 }, { 0x07, 0x04 }, | ||
|  | 	{ 0x08, 0xe0 }, { 0x10, 0x23 }, { 0x13, 0x05 }, { 0x14, 0x30 }, | ||
|  | 	{ 0x15, 0x00 }, { 0x17, 0x70 }, { 0x18, 0xf2 }, { 0x19, 0x1e }, | ||
|  | 	{ 0x1a, 0x18 }, { 0x1b, 0x0d }, { 0x1c, 0x08 }, { 0x50, 0x60 }, | ||
|  | 	{ 0x51, 0x0f }, | ||
|  | }; | ||
|  | 
 | ||
|  | static const struct phy_reg exynos4_sataphy_comlane[] = { | ||
|  | 	{ 0x01, 0x20 }, { 0x03, 0x40 }, { 0x04, 0x3c }, { 0x05, 0x7d }, | ||
|  | 	{ 0x06, 0x1d }, { 0x07, 0xcf }, { 0x08, 0x05 }, { 0x09, 0x63 }, | ||
|  | 	{ 0x0a, 0x29 }, { 0x0b, 0xc4 }, { 0x0c, 0x01 }, { 0x0d, 0x03 }, | ||
|  | 	{ 0x0e, 0x28 }, { 0x0f, 0x98 }, { 0x10, 0x19 }, { 0x13, 0x80 }, | ||
|  | 	{ 0x14, 0xf0 }, { 0x15, 0xd0 }, { 0x39, 0xa0 }, { 0x3a, 0xa0 }, | ||
|  | 	{ 0x3b, 0xa0 }, { 0x3c, 0xa0 }, { 0x3d, 0xa0 }, { 0x3e, 0xa0 }, | ||
|  | 	{ 0x3f, 0xa0 }, { 0x40, 0x42 }, { 0x42, 0x80 }, { 0x43, 0x58 }, | ||
|  | 	{ 0x45, 0x44 }, { 0x46, 0x5c }, { 0x47, 0x86 }, { 0x48, 0x8d }, | ||
|  | 	{ 0x49, 0xd0 }, { 0x4a, 0x09 }, { 0x4b, 0x90 }, { 0x4c, 0x07 }, | ||
|  | 	{ 0x4d, 0x40 }, { 0x51, 0x20 }, { 0x52, 0x32 }, { 0x7f, 0xd8 }, | ||
|  | 	{ 0x80, 0x1a }, { 0x81, 0xff }, { 0x82, 0x11 }, { 0x83, 0x00 }, | ||
|  | 	{ 0x87, 0xf0 }, { 0x87, 0xff }, { 0x87, 0xff }, { 0x87, 0xff }, | ||
|  | 	{ 0x87, 0xff }, { 0x8c, 0x1c }, { 0x8d, 0xc2 }, { 0x8e, 0xc3 }, | ||
|  | 	{ 0x8f, 0x3f }, { 0x90, 0x0a }, { 0x96, 0xf8 }, | ||
|  | }; | ||
|  | 
 | ||
|  | static int wait_for_phy_ready(void __iomem *reg, unsigned long bit) | ||
|  | { | ||
|  | 	unsigned long timeout; | ||
|  | 
 | ||
|  | 	/* wait for maximum of 3 sec */ | ||
|  | 	timeout = jiffies + msecs_to_jiffies(3000); | ||
|  | 	while (!(__raw_readl(reg) & bit)) { | ||
|  | 		if (time_after(jiffies, timeout)) | ||
|  | 			return -1; | ||
|  | 		cpu_relax(); | ||
|  | 	} | ||
|  | 	return 0; | ||
|  | } | ||
|  | 
 | ||
|  | static int ahci_phy_init(void __iomem *mmio) | ||
|  | { | ||
|  | 	int i, ctrl0; | ||
|  | 
 | ||
|  | 	for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_cmu); i++) | ||
|  | 		__raw_writeb(exynos4_sataphy_cmu[i].val, | ||
|  | 		phy_base + (exynos4_sataphy_cmu[i].reg * 4)); | ||
|  | 
 | ||
|  | 	for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_lane); i++) | ||
|  | 		__raw_writeb(exynos4_sataphy_lane[i].val, | ||
|  | 		phy_base + (LANE0 + exynos4_sataphy_lane[i].reg) * 4); | ||
|  | 
 | ||
|  | 	for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_comlane); i++) | ||
|  | 		__raw_writeb(exynos4_sataphy_comlane[i].val, | ||
|  | 		phy_base + (COM_LANE + exynos4_sataphy_comlane[i].reg) * 4); | ||
|  | 
 | ||
|  | 	__raw_writeb(0x07, phy_base); | ||
|  | 
 | ||
|  | 	ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0); | ||
|  | 	ctrl0 |= SATA_CTRL0_PHY_CMU_RST_N; | ||
|  | 	__raw_writel(ctrl0, phy_ctrl + SATA_CTRL0); | ||
|  | 
 | ||
|  | 	if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS, | ||
|  | 				SATA_PHY_STATUS_CMU_OK) < 0) { | ||
|  | 		printk(KERN_ERR "PHY CMU not ready\n"); | ||
|  | 		return -EBUSY; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	__raw_writeb(0x03, phy_base + (COM_LANE * 4)); | ||
|  | 
 | ||
|  | 	ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0); | ||
|  | 	ctrl0 |= SATA_CTRL0_M_PHY_LN_RST_N; | ||
|  | 	__raw_writel(ctrl0, phy_ctrl + SATA_CTRL0); | ||
|  | 
 | ||
|  | 	if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS, | ||
|  | 				SATA_PHY_STATUS_LANE_OK) < 0) { | ||
|  | 		printk(KERN_ERR "PHY LANE not ready\n"); | ||
|  | 		return -EBUSY; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0); | ||
|  | 	ctrl0 |= SATA_CTRL0_M_PHY_CAL; | ||
|  | 	__raw_writel(ctrl0, phy_ctrl + SATA_CTRL0); | ||
|  | 
 | ||
|  | 	return 0; | ||
|  | } | ||
|  | 
 | ||
|  | static int exynos4_ahci_init(struct device *dev, void __iomem *mmio) | ||
|  | { | ||
|  | 	struct clk *clk_sata, *clk_sataphy, *clk_sclk_sata; | ||
|  | 	int val, ret; | ||
|  | 
 | ||
|  | 	phy_base = ioremap(EXYNOS4_PA_SATAPHY, SZ_64K); | ||
|  | 	if (!phy_base) { | ||
|  | 		dev_err(dev, "failed to allocate memory for SATA PHY\n"); | ||
|  | 		return -ENOMEM; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	phy_ctrl = ioremap(EXYNOS4_PA_SATAPHY_CTRL, SZ_16); | ||
|  | 	if (!phy_ctrl) { | ||
|  | 		dev_err(dev, "failed to allocate memory for SATA PHY CTRL\n"); | ||
|  | 		ret = -ENOMEM; | ||
|  | 		goto err1; | ||
|  | 	} | ||
|  | 
 | ||
|  | 	clk_sata = clk_get(dev, "sata"); | ||
|  | 	if (IS_ERR(clk_sata)) { | ||
|  | 		dev_err(dev, "failed to get sata clock\n"); | ||
|  | 		ret = PTR_ERR(clk_sata); | ||
|  | 		clk_sata = NULL; | ||
|  | 		goto err2; | ||
|  | 
 | ||
|  | 	} | ||
|  | 	clk_enable(clk_sata); | ||
|  | 
 | ||
|  | 	clk_sataphy = clk_get(dev, "sataphy"); | ||
|  | 	if (IS_ERR(clk_sataphy)) { | ||
|  | 		dev_err(dev, "failed to get sataphy clock\n"); | ||
|  | 		ret = PTR_ERR(clk_sataphy); | ||
|  | 		clk_sataphy = NULL; | ||
|  | 		goto err3; | ||
|  | 	} | ||
|  | 	clk_enable(clk_sataphy); | ||
|  | 
 | ||
|  | 	clk_sclk_sata = clk_get(dev, "sclk_sata"); | ||
|  | 	if (IS_ERR(clk_sclk_sata)) { | ||
|  | 		dev_err(dev, "failed to get sclk_sata\n"); | ||
|  | 		ret = PTR_ERR(clk_sclk_sata); | ||
|  | 		clk_sclk_sata = NULL; | ||
|  | 		goto err4; | ||
|  | 	} | ||
|  | 	clk_enable(clk_sclk_sata); | ||
|  | 	clk_set_rate(clk_sclk_sata, SCLK_SATA_FREQ); | ||
|  | 
 | ||
|  | 	__raw_writel(S5P_PMU_SATA_PHY_CONTROL_EN, S5P_PMU_SATA_PHY_CONTROL); | ||
|  | 
 | ||
|  | 	/* Enable PHY link control */ | ||
|  | 	val = SATA_CTRL1_RST_PMALIVE_N | SATA_CTRL1_RST_RXOOB_N | | ||
|  | 			SATA_CTRL1_RST_RX_N | SATA_CTRL1_RST_TX_N; | ||
|  | 	__raw_writel(val, phy_ctrl + SATA_CTRL1); | ||
|  | 
 | ||
|  | 	/* Set communication speed as 3Gbps and enable PHY power */ | ||
|  | 	val = SATA_CTRL0_RX_DATA_VALID(3) | SATA_CTRL0_SPEED_MODE | | ||
|  | 			SATA_CTRL0_PHY_POR_N; | ||
|  | 	__raw_writel(val, phy_ctrl + SATA_CTRL0); | ||
|  | 
 | ||
|  | 	/* Port0 is available */ | ||
|  | 	__raw_writel(0x1, mmio + HOST_PORTS_IMPL); | ||
|  | 
 | ||
|  | 	return ahci_phy_init(mmio); | ||
|  | 
 | ||
|  | err4: | ||
|  | 	clk_disable(clk_sataphy); | ||
|  | 	clk_put(clk_sataphy); | ||
|  | err3: | ||
|  | 	clk_disable(clk_sata); | ||
|  | 	clk_put(clk_sata); | ||
|  | err2: | ||
|  | 	iounmap(phy_ctrl); | ||
|  | err1: | ||
|  | 	iounmap(phy_base); | ||
|  | 
 | ||
|  | 	return ret; | ||
|  | } | ||
|  | 
 | ||
|  | static struct ahci_platform_data exynos4_ahci_pdata = { | ||
|  | 	.init = exynos4_ahci_init, | ||
|  | }; | ||
|  | 
 | ||
|  | static struct resource exynos4_ahci_resource[] = { | ||
|  | 	[0] = { | ||
|  | 		.start	= EXYNOS4_PA_SATA, | ||
|  | 		.end	= EXYNOS4_PA_SATA + SZ_64K - 1, | ||
|  | 		.flags	= IORESOURCE_MEM, | ||
|  | 	}, | ||
|  | 	[1] = { | ||
|  | 		.start	= IRQ_SATA, | ||
|  | 		.end	= IRQ_SATA, | ||
|  | 		.flags	= IORESOURCE_IRQ, | ||
|  | 	}, | ||
|  | }; | ||
|  | 
 | ||
|  | static u64 exynos4_ahci_dmamask = DMA_BIT_MASK(32); | ||
|  | 
 | ||
|  | struct platform_device exynos4_device_ahci = { | ||
|  | 	.name		= "ahci", | ||
|  | 	.id		= -1, | ||
|  | 	.resource	= exynos4_ahci_resource, | ||
|  | 	.num_resources	= ARRAY_SIZE(exynos4_ahci_resource), | ||
|  | 	.dev		= { | ||
|  | 		.platform_data		= &exynos4_ahci_pdata, | ||
|  | 		.dma_mask		= &exynos4_ahci_dmamask, | ||
|  | 		.coherent_dma_mask	= DMA_BIT_MASK(32), | ||
|  | 	}, | ||
|  | }; |