| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | /*
 | 
					
						
							|  |  |  |  * Atmel PIO2 Port Multiplexer support | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * Copyright (C) 2004-2006 Atmel Corporation | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * This program is free software; you can redistribute it and/or modify | 
					
						
							|  |  |  |  * it under the terms of the GNU General Public License version 2 as | 
					
						
							|  |  |  |  * published by the Free Software Foundation. | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #include <linux/clk.h>
 | 
					
						
							|  |  |  | #include <linux/debugfs.h>
 | 
					
						
							|  |  |  | #include <linux/fs.h>
 | 
					
						
							|  |  |  | #include <linux/platform_device.h>
 | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | #include <linux/irq.h>
 | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | #include <asm/gpio.h>
 | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | #include <asm/io.h>
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #include <asm/arch/portmux.h>
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #include "pio.h"
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define MAX_NR_PIO_DEVICES		8
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | struct pio_device { | 
					
						
							| 
									
										
										
										
											2008-02-04 22:28:28 -08:00
										 |  |  | 	struct gpio_chip chip; | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 	void __iomem *regs; | 
					
						
							|  |  |  | 	const struct platform_device *pdev; | 
					
						
							|  |  |  | 	struct clk *clk; | 
					
						
							| 
									
										
										
										
											2006-12-04 13:46:52 +01:00
										 |  |  | 	u32 pinmux_mask; | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | 	char name[8]; | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static struct pio_device pio_dev[MAX_NR_PIO_DEVICES]; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2006-12-04 13:46:52 +01:00
										 |  |  | static struct pio_device *gpio_to_pio(unsigned int gpio) | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | { | 
					
						
							|  |  |  | 	struct pio_device *pio; | 
					
						
							| 
									
										
										
										
											2006-12-04 13:46:52 +01:00
										 |  |  | 	unsigned int index; | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2006-12-04 13:46:52 +01:00
										 |  |  | 	index = gpio >> 5; | 
					
						
							|  |  |  | 	if (index >= MAX_NR_PIO_DEVICES) | 
					
						
							|  |  |  | 		return NULL; | 
					
						
							|  |  |  | 	pio = &pio_dev[index]; | 
					
						
							|  |  |  | 	if (!pio->regs) | 
					
						
							|  |  |  | 		return NULL; | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2006-12-04 13:46:52 +01:00
										 |  |  | 	return pio; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* Pin multiplexing API */ | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2006-12-04 13:46:52 +01:00
										 |  |  | void __init at32_select_periph(unsigned int pin, unsigned int periph, | 
					
						
							|  |  |  | 			       unsigned long flags) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct pio_device *pio; | 
					
						
							|  |  |  | 	unsigned int pin_index = pin & 0x1f; | 
					
						
							|  |  |  | 	u32 mask = 1 << pin_index; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	pio = gpio_to_pio(pin); | 
					
						
							|  |  |  | 	if (unlikely(!pio)) { | 
					
						
							|  |  |  | 		printk("pio: invalid pin %u\n", pin); | 
					
						
							|  |  |  | 		goto fail; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2008-02-04 22:28:28 -08:00
										 |  |  | 	if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask) | 
					
						
							|  |  |  | 			 || gpiochip_is_requested(&pio->chip, pin_index))) { | 
					
						
							| 
									
										
										
										
											2006-12-04 13:46:52 +01:00
										 |  |  | 		printk("%s: pin %u is busy\n", pio->name, pin_index); | 
					
						
							|  |  |  | 		goto fail; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	pio_writel(pio, PUER, mask); | 
					
						
							|  |  |  | 	if (periph) | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 		pio_writel(pio, BSR, mask); | 
					
						
							|  |  |  | 	else | 
					
						
							|  |  |  | 		pio_writel(pio, ASR, mask); | 
					
						
							| 
									
										
										
										
											2006-12-04 13:46:52 +01:00
										 |  |  | 
 | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 	pio_writel(pio, PDR, mask); | 
					
						
							| 
									
										
										
										
											2006-12-04 13:46:52 +01:00
										 |  |  | 	if (!(flags & AT32_GPIOF_PULLUP)) | 
					
						
							|  |  |  | 		pio_writel(pio, PUDR, mask); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | fail: | 
					
						
							|  |  |  | 	dump_stack(); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | void __init at32_select_gpio(unsigned int pin, unsigned long flags) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct pio_device *pio; | 
					
						
							|  |  |  | 	unsigned int pin_index = pin & 0x1f; | 
					
						
							|  |  |  | 	u32 mask = 1 << pin_index; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	pio = gpio_to_pio(pin); | 
					
						
							|  |  |  | 	if (unlikely(!pio)) { | 
					
						
							|  |  |  | 		printk("pio: invalid pin %u\n", pin); | 
					
						
							|  |  |  | 		goto fail; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) { | 
					
						
							|  |  |  | 		printk("%s: pin %u is busy\n", pio->name, pin_index); | 
					
						
							|  |  |  | 		goto fail; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | 	if (flags & AT32_GPIOF_OUTPUT) { | 
					
						
							|  |  |  | 		if (flags & AT32_GPIOF_HIGH) | 
					
						
							|  |  |  | 			pio_writel(pio, SODR, mask); | 
					
						
							|  |  |  | 		else | 
					
						
							|  |  |  | 			pio_writel(pio, CODR, mask); | 
					
						
							| 
									
										
										
										
											2007-08-09 14:55:34 +02:00
										 |  |  | 		if (flags & AT32_GPIOF_MULTIDRV) | 
					
						
							|  |  |  | 			pio_writel(pio, MDER, mask); | 
					
						
							|  |  |  | 		else | 
					
						
							|  |  |  | 			pio_writel(pio, MDDR, mask); | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | 		pio_writel(pio, PUDR, mask); | 
					
						
							| 
									
										
										
										
											2006-12-04 13:46:52 +01:00
										 |  |  | 		pio_writel(pio, OER, mask); | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | 	} else { | 
					
						
							|  |  |  | 		if (flags & AT32_GPIOF_PULLUP) | 
					
						
							|  |  |  | 			pio_writel(pio, PUER, mask); | 
					
						
							|  |  |  | 		else | 
					
						
							|  |  |  | 			pio_writel(pio, PUDR, mask); | 
					
						
							|  |  |  | 		if (flags & AT32_GPIOF_DEGLITCH) | 
					
						
							|  |  |  | 			pio_writel(pio, IFER, mask); | 
					
						
							|  |  |  | 		else | 
					
						
							|  |  |  | 			pio_writel(pio, IFDR, mask); | 
					
						
							| 
									
										
										
										
											2006-12-04 13:46:52 +01:00
										 |  |  | 		pio_writel(pio, ODR, mask); | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | 	} | 
					
						
							| 
									
										
										
										
											2006-12-04 13:46:52 +01:00
										 |  |  | 
 | 
					
						
							|  |  |  | 	pio_writel(pio, PER, mask); | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2006-12-04 13:46:52 +01:00
										 |  |  | 	return; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | fail: | 
					
						
							|  |  |  | 	dump_stack(); | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2007-01-30 11:01:23 +01:00
										 |  |  | /* Reserve a pin, preventing anyone else from changing its configuration. */ | 
					
						
							|  |  |  | void __init at32_reserve_pin(unsigned int pin) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct pio_device *pio; | 
					
						
							|  |  |  | 	unsigned int pin_index = pin & 0x1f; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	pio = gpio_to_pio(pin); | 
					
						
							|  |  |  | 	if (unlikely(!pio)) { | 
					
						
							|  |  |  | 		printk("pio: invalid pin %u\n", pin); | 
					
						
							|  |  |  | 		goto fail; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) { | 
					
						
							|  |  |  | 		printk("%s: pin %u is busy\n", pio->name, pin_index); | 
					
						
							|  |  |  | 		goto fail; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | fail: | 
					
						
							|  |  |  | 	dump_stack(); | 
					
						
							|  |  |  | } | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | 
 | 
					
						
							|  |  |  | /*--------------------------------------------------------------------------*/ | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* GPIO API */ | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2008-02-04 22:28:28 -08:00
										 |  |  | static int direction_input(struct gpio_chip *chip, unsigned offset) | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | { | 
					
						
							| 
									
										
										
										
											2008-02-04 22:28:28 -08:00
										 |  |  | 	struct pio_device *pio = container_of(chip, struct pio_device, chip); | 
					
						
							|  |  |  | 	u32 mask = 1 << offset; | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2008-02-04 22:28:28 -08:00
										 |  |  | 	if (!(pio_readl(pio, PSR) & mask)) | 
					
						
							|  |  |  | 		return -EINVAL; | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2008-02-04 22:28:28 -08:00
										 |  |  | 	pio_writel(pio, ODR, mask); | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | 	return 0; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2008-02-04 22:28:28 -08:00
										 |  |  | static int gpio_get(struct gpio_chip *chip, unsigned offset) | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | { | 
					
						
							| 
									
										
										
										
											2008-02-04 22:28:28 -08:00
										 |  |  | 	struct pio_device *pio = container_of(chip, struct pio_device, chip); | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2008-02-04 22:28:28 -08:00
										 |  |  | 	return (pio_readl(pio, PDSR) >> offset) & 1; | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2008-02-04 22:28:28 -08:00
										 |  |  | static void gpio_set(struct gpio_chip *chip, unsigned offset, int value); | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2008-02-04 22:28:28 -08:00
										 |  |  | static int direction_output(struct gpio_chip *chip, unsigned offset, int value) | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | { | 
					
						
							| 
									
										
										
										
											2008-02-04 22:28:28 -08:00
										 |  |  | 	struct pio_device *pio = container_of(chip, struct pio_device, chip); | 
					
						
							|  |  |  | 	u32 mask = 1 << offset; | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2008-02-04 22:28:28 -08:00
										 |  |  | 	if (!(pio_readl(pio, PSR) & mask)) | 
					
						
							|  |  |  | 		return -EINVAL; | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2008-02-04 22:28:28 -08:00
										 |  |  | 	gpio_set(chip, offset, value); | 
					
						
							|  |  |  | 	pio_writel(pio, OER, mask); | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | 	return 0; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2008-02-04 22:28:28 -08:00
										 |  |  | static void gpio_set(struct gpio_chip *chip, unsigned offset, int value) | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | { | 
					
						
							| 
									
										
										
										
											2008-02-04 22:28:28 -08:00
										 |  |  | 	struct pio_device *pio = container_of(chip, struct pio_device, chip); | 
					
						
							|  |  |  | 	u32 mask = 1 << offset; | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | 
 | 
					
						
							|  |  |  | 	if (value) | 
					
						
							|  |  |  | 		pio_writel(pio, SODR, mask); | 
					
						
							|  |  |  | 	else | 
					
						
							|  |  |  | 		pio_writel(pio, CODR, mask); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /*--------------------------------------------------------------------------*/ | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* GPIO IRQ support */ | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static void gpio_irq_mask(unsigned irq) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	unsigned		gpio = irq_to_gpio(irq); | 
					
						
							|  |  |  | 	struct pio_device	*pio = &pio_dev[gpio >> 5]; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	pio_writel(pio, IDR, 1 << (gpio & 0x1f)); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static void gpio_irq_unmask(unsigned irq) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	unsigned		gpio = irq_to_gpio(irq); | 
					
						
							|  |  |  | 	struct pio_device	*pio = &pio_dev[gpio >> 5]; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	pio_writel(pio, IER, 1 << (gpio & 0x1f)); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static int gpio_irq_type(unsigned irq, unsigned type) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	if (type != IRQ_TYPE_EDGE_BOTH && type != IRQ_TYPE_NONE) | 
					
						
							|  |  |  | 		return -EINVAL; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return 0; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static struct irq_chip gpio_irqchip = { | 
					
						
							|  |  |  | 	.name		= "gpio", | 
					
						
							|  |  |  | 	.mask		= gpio_irq_mask, | 
					
						
							|  |  |  | 	.unmask		= gpio_irq_unmask, | 
					
						
							|  |  |  | 	.set_type	= gpio_irq_type, | 
					
						
							|  |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct pio_device	*pio = get_irq_chip_data(irq); | 
					
						
							|  |  |  | 	unsigned		gpio_irq; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	gpio_irq = (unsigned) get_irq_data(irq); | 
					
						
							|  |  |  | 	for (;;) { | 
					
						
							|  |  |  | 		u32		isr; | 
					
						
							|  |  |  | 		struct irq_desc	*d; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 		/* ack pending GPIO interrupts */ | 
					
						
							|  |  |  | 		isr = pio_readl(pio, ISR) & pio_readl(pio, IMR); | 
					
						
							|  |  |  | 		if (!isr) | 
					
						
							|  |  |  | 			break; | 
					
						
							|  |  |  | 		do { | 
					
						
							|  |  |  | 			int i; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 			i = ffs(isr) - 1; | 
					
						
							|  |  |  | 			isr &= ~(1 << i); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 			i += gpio_irq; | 
					
						
							|  |  |  | 			d = &irq_desc[i]; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 			d->handle_irq(i, d); | 
					
						
							|  |  |  | 		} while (isr); | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static void __init | 
					
						
							|  |  |  | gpio_irq_setup(struct pio_device *pio, int irq, int gpio_irq) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	unsigned	i; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	set_irq_chip_data(irq, pio); | 
					
						
							|  |  |  | 	set_irq_data(irq, (void *) gpio_irq); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	for (i = 0; i < 32; i++, gpio_irq++) { | 
					
						
							|  |  |  | 		set_irq_chip_data(gpio_irq, pio); | 
					
						
							|  |  |  | 		set_irq_chip_and_handler(gpio_irq, &gpio_irqchip, | 
					
						
							|  |  |  | 				handle_simple_irq); | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	set_irq_chained_handler(irq, gpio_irq_handler); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2008-02-04 22:28:28 -08:00
										 |  |  | /*--------------------------------------------------------------------------*/ | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #ifdef CONFIG_DEBUG_FS
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #include <linux/seq_file.h>
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /*
 | 
					
						
							|  |  |  |  * This shows more info than the generic gpio dump code: | 
					
						
							|  |  |  |  * pullups, deglitching, open drain drive. | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | static void pio_bank_show(struct seq_file *s, struct gpio_chip *chip) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct pio_device *pio = container_of(chip, struct pio_device, chip); | 
					
						
							|  |  |  | 	u32			psr, osr, imr, pdsr, pusr, ifsr, mdsr; | 
					
						
							|  |  |  | 	unsigned		i; | 
					
						
							|  |  |  | 	u32			mask; | 
					
						
							|  |  |  | 	char			bank; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	psr = pio_readl(pio, PSR); | 
					
						
							|  |  |  | 	osr = pio_readl(pio, OSR); | 
					
						
							|  |  |  | 	imr = pio_readl(pio, IMR); | 
					
						
							|  |  |  | 	pdsr = pio_readl(pio, PDSR); | 
					
						
							|  |  |  | 	pusr = pio_readl(pio, PUSR); | 
					
						
							|  |  |  | 	ifsr = pio_readl(pio, IFSR); | 
					
						
							|  |  |  | 	mdsr = pio_readl(pio, MDSR); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	bank = 'A' + pio->pdev->id; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	for (i = 0, mask = 1; i < 32; i++, mask <<= 1) { | 
					
						
							|  |  |  | 		const char *label; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 		label = gpiochip_is_requested(chip, i); | 
					
						
							|  |  |  | 		if (!label) | 
					
						
							|  |  |  | 			continue; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 		seq_printf(s, " gpio-%-3d P%c%-2d (%-12s) %s %s %s", | 
					
						
							|  |  |  | 			chip->base + i, bank, i, | 
					
						
							|  |  |  | 			label, | 
					
						
							|  |  |  | 			(osr & mask) ? "out" : "in ", | 
					
						
							|  |  |  | 			(mask & pdsr) ? "hi" : "lo", | 
					
						
							|  |  |  | 			(mask & pusr) ? "  " : "up"); | 
					
						
							|  |  |  | 		if (ifsr & mask) | 
					
						
							|  |  |  | 			seq_printf(s, " deglitch"); | 
					
						
							|  |  |  | 		if ((osr & mdsr) & mask) | 
					
						
							|  |  |  | 			seq_printf(s, " open-drain"); | 
					
						
							|  |  |  | 		if (imr & mask) | 
					
						
							|  |  |  | 			seq_printf(s, " irq-%d edge-both", | 
					
						
							|  |  |  | 				gpio_to_irq(chip->base + i)); | 
					
						
							|  |  |  | 		seq_printf(s, "\n"); | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #else
 | 
					
						
							|  |  |  | #define pio_bank_show	NULL
 | 
					
						
							|  |  |  | #endif
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | /*--------------------------------------------------------------------------*/ | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | static int __init pio_probe(struct platform_device *pdev) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct pio_device *pio = NULL; | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | 	int irq = platform_get_irq(pdev, 0); | 
					
						
							|  |  |  | 	int gpio_irq_base = GPIO_IRQ_BASE + pdev->id * 32; | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 
 | 
					
						
							|  |  |  | 	BUG_ON(pdev->id >= MAX_NR_PIO_DEVICES); | 
					
						
							|  |  |  | 	pio = &pio_dev[pdev->id]; | 
					
						
							|  |  |  | 	BUG_ON(!pio->regs); | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2008-02-04 22:28:28 -08:00
										 |  |  | 	pio->chip.label = pio->name; | 
					
						
							|  |  |  | 	pio->chip.base = pdev->id * 32; | 
					
						
							|  |  |  | 	pio->chip.ngpio = 32; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	pio->chip.direction_input = direction_input; | 
					
						
							|  |  |  | 	pio->chip.get = gpio_get; | 
					
						
							|  |  |  | 	pio->chip.direction_output = direction_output; | 
					
						
							|  |  |  | 	pio->chip.set = gpio_set; | 
					
						
							|  |  |  | 	pio->chip.dbg_show = pio_bank_show; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	gpiochip_add(&pio->chip); | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | 	gpio_irq_setup(pio, irq, gpio_irq_base); | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 
 | 
					
						
							|  |  |  | 	platform_set_drvdata(pdev, pio); | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | 	printk(KERN_DEBUG "%s: base 0x%p, irq %d chains %d..%d\n", | 
					
						
							|  |  |  | 	       pio->name, pio->regs, irq, gpio_irq_base, gpio_irq_base + 31); | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 
 | 
					
						
							|  |  |  | 	return 0; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static struct platform_driver pio_driver = { | 
					
						
							|  |  |  | 	.probe		= pio_probe, | 
					
						
							|  |  |  | 	.driver		= { | 
					
						
							|  |  |  | 		.name		= "pio", | 
					
						
							|  |  |  | 	}, | 
					
						
							|  |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static int __init pio_init(void) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	return platform_driver_register(&pio_driver); | 
					
						
							|  |  |  | } | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | postcore_initcall(pio_init); | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 
 | 
					
						
							|  |  |  | void __init at32_init_pio(struct platform_device *pdev) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct resource *regs; | 
					
						
							|  |  |  | 	struct pio_device *pio; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if (pdev->id > MAX_NR_PIO_DEVICES) { | 
					
						
							|  |  |  | 		dev_err(&pdev->dev, "only %d PIO devices supported\n", | 
					
						
							|  |  |  | 			MAX_NR_PIO_DEVICES); | 
					
						
							|  |  |  | 		return; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	pio = &pio_dev[pdev->id]; | 
					
						
							|  |  |  | 	snprintf(pio->name, sizeof(pio->name), "pio%d", pdev->id); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
					
						
							|  |  |  | 	if (!regs) { | 
					
						
							|  |  |  | 		dev_err(&pdev->dev, "no mmio resource defined\n"); | 
					
						
							|  |  |  | 		return; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	pio->clk = clk_get(&pdev->dev, "mck"); | 
					
						
							|  |  |  | 	if (IS_ERR(pio->clk)) | 
					
						
							|  |  |  | 		/*
 | 
					
						
							|  |  |  | 		 * This is a fatal error, but if we continue we might | 
					
						
							|  |  |  | 		 * be so lucky that we manage to initialize the | 
					
						
							|  |  |  | 		 * console and display this message... | 
					
						
							|  |  |  | 		 */ | 
					
						
							|  |  |  | 		dev_err(&pdev->dev, "no mck clock defined\n"); | 
					
						
							|  |  |  | 	else | 
					
						
							|  |  |  | 		clk_enable(pio->clk); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	pio->pdev = pdev; | 
					
						
							|  |  |  | 	pio->regs = ioremap(regs->start, regs->end - regs->start + 1); | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2007-02-05 16:57:13 +01:00
										 |  |  | 	/* start with irqs disabled and acked */ | 
					
						
							|  |  |  | 	pio_writel(pio, IDR, ~0UL); | 
					
						
							|  |  |  | 	(void) pio_readl(pio, ISR); | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | } |