forge/linux-pinenote
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
linux-pinenote/net/ipv6/xfrm6_output.c

162 lines
3.6 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* xfrm6_output.c - Common IPsec encapsulation code for IPv6.
* Copyright (C) 2002 USAGI/WIDE Project
* Copyright (c) 2004 Herbert Xu <herbert@gondor.apana.org.au>
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 23:24:49 +09:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
[IPSEC]: Move common output code to xfrm_output Most of the code in xfrm4_output_one and xfrm6_output_one are identical so this patch moves them into a common xfrm_output function which will live in net/xfrm. In fact this would seem to fix a bug as on IPv4 we never reset the network header after a transform which may upset netfilter later on. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-08 17:16:30 -07:00
#include <linux/if_ether.h>
[IPSEC]: Separate inner/outer mode processing on output With inter-family transforms the inner mode differs from the outer mode. Attempting to handle both sides from the same function means that it needs to handle both IPv4 and IPv6 which creates duplication and confusion. This patch separates the two parts on the output path so that each function deals with one family only. In particular, the functions xfrm4_extract_output/xfrm6_extract_output moves the pertinent fields from the IPv4/IPv6 IP headers into a neutral format stored in skb->cb. This is then used by the outer mode output functions to write the outer IP header. In this way the output function no longer has to know about the inner address family. Since the extract functions are only called by tunnel modes (the only modes that can support inter-family transforms), I've also moved the xfrm*_tunnel_check_size calls into them. This allows the correct ICMP message to be sent as opposed to now where you might call icmp_send with an IPv6 packet and vice versa. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13 21:40:52 -08:00
#include <linux/kernel.h>
#include <linux/module.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#include <linux/skbuff.h>
#include <linux/icmpv6.h>
[XFRM]: Netfilter IPsec output hooks Call netfilter hooks before IPsec transforms. Packets visit the FORWARD/LOCAL_OUT and POST_ROUTING hook before the first encapsulation and the LOCAL_OUT and POST_ROUTING hook before each following tunnel mode transform. Patch from Herbert Xu <herbert@gondor.apana.org.au>: Move the loop from dst_output into xfrm4_output/xfrm6_output since they're the only ones who need to it. xfrm{4,6}_output_one() processes the first SA all subsequent transport mode SAs and is called in a loop that calls the netfilter hooks between each two calls. In order to avoid the tail call issue, I've added the inline function nf_hook which is nf_hook_slow plus the empty list check. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-06 23:01:48 -08:00
#include <linux/netfilter_ipv6.h>
[IPSEC]: Separate inner/outer mode processing on output With inter-family transforms the inner mode differs from the outer mode. Attempting to handle both sides from the same function means that it needs to handle both IPv4 and IPv6 which creates duplication and confusion. This patch separates the two parts on the output path so that each function deals with one family only. In particular, the functions xfrm4_extract_output/xfrm6_extract_output moves the pertinent fields from the IPv4/IPv6 IP headers into a neutral format stored in skb->cb. This is then used by the outer mode output functions to write the outer IP header. In this way the output function no longer has to know about the inner address family. Since the extract functions are only called by tunnel modes (the only modes that can support inter-family transforms), I've also moved the xfrm*_tunnel_check_size calls into them. This allows the correct ICMP message to be sent as opposed to now where you might call icmp_send with an IPv6 packet and vice versa. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13 21:40:52 -08:00
#include <net/dst.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#include <net/ipv6.h>
ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed. This patch modifies IPsec6 to fragment IPv6 packets that are locally generated as needed. This version of the patch only fragments in tunnel mode, so that fragment headers will not be obscured by ESP in transport mode. Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17 11:42:42 +00:00
#include <net/ip6_route.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#include <net/xfrm.h>
[XFRM] STATE: Add a hook to find offset to be inserted header in outbound. On current kernel, ip6_find_1stfragopt() is used by IPv6 IPsec to find offset to be inserted header in outbound for transport mode. (BTW, no usage may be needed for IPv4 case.) Mobile IPv6 requires another logic for routing header and destination options header respectively. This patch is common platform for the offset and adopts it to IPsec. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-23 17:57:28 -07:00
int xfrm6_find_1stfragopt(struct xfrm_state *x, struct sk_buff *skb,
u8 **prevhdr)
{
return ip6_find_1stfragopt(skb, prevhdr);
}
[IPV6]: Decentralize EXPORT_SYMBOLs. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-02-22 22:05:40 +09:00
EXPORT_SYMBOL(xfrm6_find_1stfragopt);
xfrm6: Don't call icmpv6_send on local error Calling icmpv6_send() on a local message size error leads to an incorrect update of the path mtu. So use xfrm6_local_rxpmtu() to notify about the pmtu if the IPV6_DONTFRAG socket option is set on an udp or raw socket, according RFC 3542 and use ipv6_local_error() otherwise. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-11 01:44:30 +00:00
static int xfrm6_local_dontfrag(struct sk_buff *skb)
{
int proto;
struct sock *sk = skb->sk;
if (sk) {
proto = sk->sk_protocol;
if (proto == IPPROTO_UDP || proto == IPPROTO_RAW)
return inet6_sk(sk)->dontfrag;
}
return 0;
}
static void xfrm6_local_rxpmtu(struct sk_buff *skb, u32 mtu)
{
struct flowi6 fl6;
struct sock *sk = skb->sk;
fl6.flowi6_oif = sk->sk_bound_dev_if;
net: remove ipv6_addr_copy() C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-21 03:39:03 +00:00
fl6.daddr = ipv6_hdr(skb)->daddr;
xfrm6: Don't call icmpv6_send on local error Calling icmpv6_send() on a local message size error leads to an incorrect update of the path mtu. So use xfrm6_local_rxpmtu() to notify about the pmtu if the IPV6_DONTFRAG socket option is set on an udp or raw socket, according RFC 3542 and use ipv6_local_error() otherwise. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-11 01:44:30 +00:00
ipv6_local_rxpmtu(sk, &fl6, mtu);
}
static void xfrm6_local_error(struct sk_buff *skb, u32 mtu)
{
struct flowi6 fl6;
struct sock *sk = skb->sk;
fl6.fl6_dport = inet_sk(sk)->inet_dport;
net: remove ipv6_addr_copy() C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-21 03:39:03 +00:00
fl6.daddr = ipv6_hdr(skb)->daddr;
xfrm6: Don't call icmpv6_send on local error Calling icmpv6_send() on a local message size error leads to an incorrect update of the path mtu. So use xfrm6_local_rxpmtu() to notify about the pmtu if the IPV6_DONTFRAG socket option is set on an udp or raw socket, according RFC 3542 and use ipv6_local_error() otherwise. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-11 01:44:30 +00:00
ipv6_local_error(sk, EMSGSIZE, &fl6, mtu);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
static int xfrm6_tunnel_check_size(struct sk_buff *skb)
{
int mtu, ret = 0;
net: skb->dst accessors Define three accessors to get/set dst attached to a skb struct dst_entry *skb_dst(const struct sk_buff *skb) void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst) void skb_dst_drop(struct sk_buff *skb) This one should replace occurrences of : dst_release(skb->dst) skb->dst = NULL; Delete skb->dst field Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-02 05:19:30 +00:00
struct dst_entry *dst = skb_dst(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
mtu = dst_mtu(dst);
if (mtu < IPV6_MIN_MTU)
mtu = IPV6_MIN_MTU;
[IPV6]: Fix IPsec datagram fragmentation This is a long-standing bug in the IPsec IPv6 code that breaks when we emit a IPsec tunnel-mode datagram packet. The problem is that the code the emits the packet assumes the IPv6 stack will fragment it later, but the IPv6 stack assumes that whoever is emitting the packet is going to pre-fragment the packet. In the long term we need to fix both sides, e.g., to get the datagram code to pre-fragment as well as to get the IPv6 stack to fragment locally generated tunnel-mode packet. For now this patch does the second part which should make it work for the IPsec host case. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-12 18:07:27 -08:00
if (!skb->local_df && skb->len > mtu) {
[IPV6]: Fix xfrm tunnel oops with large packets Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-23 13:11:07 -07:00
skb->dev = dst->dev;
xfrm6: Don't call icmpv6_send on local error Calling icmpv6_send() on a local message size error leads to an incorrect update of the path mtu. So use xfrm6_local_rxpmtu() to notify about the pmtu if the IPV6_DONTFRAG socket option is set on an udp or raw socket, according RFC 3542 and use ipv6_local_error() otherwise. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-11 01:44:30 +00:00
if (xfrm6_local_dontfrag(skb))
xfrm6_local_rxpmtu(skb, mtu);
else if (skb->sk)
xfrm6_local_error(skb, mtu);
else
icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ret = -EMSGSIZE;
}
return ret;
}
[IPSEC]: Separate inner/outer mode processing on output With inter-family transforms the inner mode differs from the outer mode. Attempting to handle both sides from the same function means that it needs to handle both IPv4 and IPv6 which creates duplication and confusion. This patch separates the two parts on the output path so that each function deals with one family only. In particular, the functions xfrm4_extract_output/xfrm6_extract_output moves the pertinent fields from the IPv4/IPv6 IP headers into a neutral format stored in skb->cb. This is then used by the outer mode output functions to write the outer IP header. In this way the output function no longer has to know about the inner address family. Since the extract functions are only called by tunnel modes (the only modes that can support inter-family transforms), I've also moved the xfrm*_tunnel_check_size calls into them. This allows the correct ICMP message to be sent as opposed to now where you might call icmp_send with an IPv6 packet and vice versa. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13 21:40:52 -08:00
int xfrm6_extract_output(struct xfrm_state *x, struct sk_buff *skb)
{
int err;
err = xfrm6_tunnel_check_size(skb);
if (err)
return err;
[IPSEC]: Remove nhoff from xfrm_input The nhoff field isn't actually necessary in xfrm_input. For tunnel mode transforms we now throw away the output IP header so it makes no sense to fill in the nexthdr field. For transport mode we can now let the function transport_finish do the setting and it knows where the nexthdr field is. The only other thing that needs the nexthdr field to be set is the header extraction code. However, we can simply move the protocol extraction out of the generic header extraction. We want to minimise the amount of info we have to carry around between transforms as this simplifies the resumption process for async crypto. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-19 18:47:58 -08:00
XFRM_MODE_SKB_CB(skb)->protocol = ipv6_hdr(skb)->nexthdr;
[IPSEC]: Separate inner/outer mode processing on output With inter-family transforms the inner mode differs from the outer mode. Attempting to handle both sides from the same function means that it needs to handle both IPv4 and IPv6 which creates duplication and confusion. This patch separates the two parts on the output path so that each function deals with one family only. In particular, the functions xfrm4_extract_output/xfrm6_extract_output moves the pertinent fields from the IPv4/IPv6 IP headers into a neutral format stored in skb->cb. This is then used by the outer mode output functions to write the outer IP header. In this way the output function no longer has to know about the inner address family. Since the extract functions are only called by tunnel modes (the only modes that can support inter-family transforms), I've also moved the xfrm*_tunnel_check_size calls into them. This allows the correct ICMP message to be sent as opposed to now where you might call icmp_send with an IPv6 packet and vice versa. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13 21:40:52 -08:00
return xfrm6_extract_header(skb);
}
int xfrm6_prepare_output(struct xfrm_state *x, struct sk_buff *skb)
{
int err;
[IPSEC]: Fix inter address family IPsec tunnel handling. Signed-off-by: Kazunori MIYAZAWA <kazunori@miyazawa.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-24 14:51:51 -07:00
err = xfrm_inner_extract_output(x, skb);
[IPSEC]: Separate inner/outer mode processing on output With inter-family transforms the inner mode differs from the outer mode. Attempting to handle both sides from the same function means that it needs to handle both IPv4 and IPv6 which creates duplication and confusion. This patch separates the two parts on the output path so that each function deals with one family only. In particular, the functions xfrm4_extract_output/xfrm6_extract_output moves the pertinent fields from the IPv4/IPv6 IP headers into a neutral format stored in skb->cb. This is then used by the outer mode output functions to write the outer IP header. In this way the output function no longer has to know about the inner address family. Since the extract functions are only called by tunnel modes (the only modes that can support inter-family transforms), I've also moved the xfrm*_tunnel_check_size calls into them. This allows the correct ICMP message to be sent as opposed to now where you might call icmp_send with an IPv6 packet and vice versa. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13 21:40:52 -08:00
if (err)
return err;
memset(IP6CB(skb), 0, sizeof(*IP6CB(skb)));
[IPSEC]: Merge most of the output path As part of the work on asynchrnous cryptographic operations, we need to be able to resume from the spot where they occur. As such, it helps if we isolate them to one spot. This patch moves most of the remaining family-specific processing into the common output code. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13 21:43:11 -08:00
#ifdef CONFIG_NETFILTER
IP6CB(skb)->flags |= IP6SKB_XFRM_TRANSFORMED;
#endif
[IPSEC]: Separate inner/outer mode processing on output With inter-family transforms the inner mode differs from the outer mode. Attempting to handle both sides from the same function means that it needs to handle both IPv4 and IPv6 which creates duplication and confusion. This patch separates the two parts on the output path so that each function deals with one family only. In particular, the functions xfrm4_extract_output/xfrm6_extract_output moves the pertinent fields from the IPv4/IPv6 IP headers into a neutral format stored in skb->cb. This is then used by the outer mode output functions to write the outer IP header. In this way the output function no longer has to know about the inner address family. Since the extract functions are only called by tunnel modes (the only modes that can support inter-family transforms), I've also moved the xfrm*_tunnel_check_size calls into them. This allows the correct ICMP message to be sent as opposed to now where you might call icmp_send with an IPv6 packet and vice versa. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13 21:40:52 -08:00
skb->protocol = htons(ETH_P_IPV6);
xfrm: fix fragmentation on inter family tunnels If an ipv4 packet (not locally generated with IP_DF flag not set) bigger than mtu size is supposed to go via a xfrm ipv6 tunnel, the packetsize check in xfrm4_tunnel_check_size() is omited and ipv6 drops the packet without sending a notice to the original sender of the ipv4 packet. Another issue is that ipv4 connection tracking does reassembling of incomming fragmented packets. If such a reassembled packet is supposed to go via a xfrm ipv6 tunnel it will be droped, even if the original sender did proper fragmentation. According to RFC 2473 (section 7) tunnel ipv6 packets resulting from the encapsulation of an original packet are considered as locally generated packets. If such a packet passed the checks in xfrm{4,6}_tunnel_check_size() fragmentation is allowed according to RFC 2473 (section 7.1/7.2). This patch sets skb->local_df in xfrm6_prepare_output() to achieve fragmentation in this case. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-06 03:58:50 +00:00
skb->local_df = 1;
[IPSEC]: Separate inner/outer mode processing on output With inter-family transforms the inner mode differs from the outer mode. Attempting to handle both sides from the same function means that it needs to handle both IPv4 and IPv6 which creates duplication and confusion. This patch separates the two parts on the output path so that each function deals with one family only. In particular, the functions xfrm4_extract_output/xfrm6_extract_output moves the pertinent fields from the IPv4/IPv6 IP headers into a neutral format stored in skb->cb. This is then used by the outer mode output functions to write the outer IP header. In this way the output function no longer has to know about the inner address family. Since the extract functions are only called by tunnel modes (the only modes that can support inter-family transforms), I've also moved the xfrm*_tunnel_check_size calls into them. This allows the correct ICMP message to be sent as opposed to now where you might call icmp_send with an IPv6 packet and vice versa. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13 21:40:52 -08:00
return x->outer_mode->output2(x, skb);
}
EXPORT_SYMBOL(xfrm6_prepare_output);
xfrm: Assign the inner mode output function to the dst entry As it is, we assign the outer modes output function to the dst entry when we create the xfrm bundle. This leads to two problems on interfamily scenarios. We might insert ipv4 packets into ip6_fragment when called from xfrm6_output. The system crashes if we try to fragment an ipv4 packet with ip6_fragment. This issue was introduced with git commit ad0081e4 (ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed). The second issue is, that we might insert ipv4 packets in netfilter6 and vice versa on interfamily scenarios. With this patch we assign the inner mode output function to the dst entry when we create the xfrm bundle. So xfrm4_output/xfrm6_output from the inner mode is used and the right fragmentation and netfilter functions are called. We switch then to outer mode with the output_finish functions. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09 19:36:38 +00:00
int xfrm6_output_finish(struct sk_buff *skb)
[IPSEC]: Handle GSO packets This patch segments GSO packets received by the IPsec stack. This can happen when a NIC driver injects GSO packets into the stack which are then forwarded to another host. The primary application of this is going to be Xen where its backend driver may inject GSO packets into dom0. Of course this also can be used by other virtualisation schemes such as VMWare or UML since the tap device could be modified to inject GSO packets received through splice. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-22 03:08:03 -07:00
{
[IPSEC]: Merge most of the output path As part of the work on asynchrnous cryptographic operations, we need to be able to resume from the spot where they occur. As such, it helps if we isolate them to one spot. This patch moves most of the remaining family-specific processing into the common output code. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13 21:43:11 -08:00
#ifdef CONFIG_NETFILTER
IP6CB(skb)->flags |= IP6SKB_XFRM_TRANSFORMED;
#endif
[IPSEC]: Handle GSO packets This patch segments GSO packets received by the IPsec stack. This can happen when a NIC driver injects GSO packets into the stack which are then forwarded to another host. The primary application of this is going to be Xen where its backend driver may inject GSO packets into dom0. Of course this also can be used by other virtualisation schemes such as VMWare or UML since the tap device could be modified to inject GSO packets received through splice. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-22 03:08:03 -07:00
[XFRM]: Fix protocol field value for outgoing IPv6 GSO packets Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-30 20:19:11 -07:00
skb->protocol = htons(ETH_P_IPV6);
[IPSEC]: Merge most of the output path As part of the work on asynchrnous cryptographic operations, we need to be able to resume from the spot where they occur. As such, it helps if we isolate them to one spot. This patch moves most of the remaining family-specific processing into the common output code. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13 21:43:11 -08:00
return xfrm_output(skb);
[IPSEC]: Handle GSO packets This patch segments GSO packets received by the IPsec stack. This can happen when a NIC driver injects GSO packets into the stack which are then forwarded to another host. The primary application of this is going to be Xen where its backend driver may inject GSO packets into dom0. Of course this also can be used by other virtualisation schemes such as VMWare or UML since the tap device could be modified to inject GSO packets received through splice. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-22 03:08:03 -07:00
}
ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed. This patch modifies IPsec6 to fragment IPv6 packets that are locally generated as needed. This version of the patch only fragments in tunnel mode, so that fragment headers will not be obscured by ESP in transport mode. Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17 11:42:42 +00:00
static int __xfrm6_output(struct sk_buff *skb)
{
struct dst_entry *dst = skb_dst(skb);
struct xfrm_state *x = dst->xfrm;
xfrm6: Don't call icmpv6_send on local error Calling icmpv6_send() on a local message size error leads to an incorrect update of the path mtu. So use xfrm6_local_rxpmtu() to notify about the pmtu if the IPV6_DONTFRAG socket option is set on an udp or raw socket, according RFC 3542 and use ipv6_local_error() otherwise. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-11 01:44:30 +00:00
int mtu = ip6_skb_dst_mtu(skb);
if (skb->len > mtu && xfrm6_local_dontfrag(skb)) {
xfrm6_local_rxpmtu(skb, mtu);
return -EMSGSIZE;
} else if (!skb->local_df && skb->len > mtu && skb->sk) {
xfrm6_local_error(skb, mtu);
return -EMSGSIZE;
}
ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed. This patch modifies IPsec6 to fragment IPv6 packets that are locally generated as needed. This version of the patch only fragments in tunnel mode, so that fragment headers will not be obscured by ESP in transport mode. Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17 11:42:42 +00:00
xfrm6: remove unneeded NULL check in __xfrm6_output() We don't check for NULL consistently in __xfrm6_output(). If "x" were NULL here it would lead to an OOPs later. I asked Steffen Klassert about this and he suggested that we remove the NULL check. On 10/29/11, Steffen Klassert <steffen.klassert@secunet.com> wrote: >> net/ipv6/xfrm6_output.c >> 148 >> 149 if ((x && x->props.mode == XFRM_MODE_TUNNEL) && >> ^ > > x can't be null here. It would be a bug if __xfrm6_output() is called > without a xfrm_state attached to the skb. I think we can just remove > this null check. Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-31 21:45:26 +00:00
if (x->props.mode == XFRM_MODE_TUNNEL &&
xfrm6: Don't call icmpv6_send on local error Calling icmpv6_send() on a local message size error leads to an incorrect update of the path mtu. So use xfrm6_local_rxpmtu() to notify about the pmtu if the IPV6_DONTFRAG socket option is set on an udp or raw socket, according RFC 3542 and use ipv6_local_error() otherwise. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-11 01:44:30 +00:00
((skb->len > mtu && !skb_is_gso(skb)) ||
ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed. This patch modifies IPsec6 to fragment IPv6 packets that are locally generated as needed. This version of the patch only fragments in tunnel mode, so that fragment headers will not be obscured by ESP in transport mode. Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17 11:42:42 +00:00
dst_allfrag(skb_dst(skb)))) {
xfrm: Assign the inner mode output function to the dst entry As it is, we assign the outer modes output function to the dst entry when we create the xfrm bundle. This leads to two problems on interfamily scenarios. We might insert ipv4 packets into ip6_fragment when called from xfrm6_output. The system crashes if we try to fragment an ipv4 packet with ip6_fragment. This issue was introduced with git commit ad0081e4 (ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed). The second issue is, that we might insert ipv4 packets in netfilter6 and vice versa on interfamily scenarios. With this patch we assign the inner mode output function to the dst entry when we create the xfrm bundle. So xfrm4_output/xfrm6_output from the inner mode is used and the right fragmentation and netfilter functions are called. We switch then to outer mode with the output_finish functions. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09 19:36:38 +00:00
return ip6_fragment(skb, x->outer_mode->afinfo->output_finish);
ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed. This patch modifies IPsec6 to fragment IPv6 packets that are locally generated as needed. This version of the patch only fragments in tunnel mode, so that fragment headers will not be obscured by ESP in transport mode. Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17 11:42:42 +00:00
}
xfrm: Assign the inner mode output function to the dst entry As it is, we assign the outer modes output function to the dst entry when we create the xfrm bundle. This leads to two problems on interfamily scenarios. We might insert ipv4 packets into ip6_fragment when called from xfrm6_output. The system crashes if we try to fragment an ipv4 packet with ip6_fragment. This issue was introduced with git commit ad0081e4 (ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed). The second issue is, that we might insert ipv4 packets in netfilter6 and vice versa on interfamily scenarios. With this patch we assign the inner mode output function to the dst entry when we create the xfrm bundle. So xfrm4_output/xfrm6_output from the inner mode is used and the right fragmentation and netfilter functions are called. We switch then to outer mode with the output_finish functions. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09 19:36:38 +00:00
return x->outer_mode->afinfo->output_finish(skb);
ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed. This patch modifies IPsec6 to fragment IPv6 packets that are locally generated as needed. This version of the patch only fragments in tunnel mode, so that fragment headers will not be obscured by ESP in transport mode. Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17 11:42:42 +00:00
}
[XFRM]: Netfilter IPsec output hooks Call netfilter hooks before IPsec transforms. Packets visit the FORWARD/LOCAL_OUT and POST_ROUTING hook before the first encapsulation and the LOCAL_OUT and POST_ROUTING hook before each following tunnel mode transform. Patch from Herbert Xu <herbert@gondor.apana.org.au>: Move the loop from dst_output into xfrm4_output/xfrm6_output since they're the only ones who need to it. xfrm{4,6}_output_one() processes the first SA all subsequent transport mode SAs and is called in a loop that calls the netfilter hooks between each two calls. In order to avoid the tail call issue, I've added the inline function nf_hook which is nf_hook_slow plus the empty list check. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-06 23:01:48 -08:00
int xfrm6_output(struct sk_buff *skb)
{
netfilter: ipv6: use NFPROTO values for NF_HOOK invocation The semantic patch that was used: // <smpl> @@ @@ (NF_HOOK |NF_HOOK_THRESH |nf_hook )( -PF_INET6, +NFPROTO_IPV6, ...) // </smpl> Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-03-23 04:09:07 +01:00
return NF_HOOK(NFPROTO_IPV6, NF_INET_POST_ROUTING, skb, NULL,
ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed. This patch modifies IPsec6 to fragment IPv6 packets that are locally generated as needed. This version of the patch only fragments in tunnel mode, so that fragment headers will not be obscured by ESP in transport mode. Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17 11:42:42 +00:00
skb_dst(skb)->dev, __xfrm6_output);
[XFRM]: Netfilter IPsec output hooks Call netfilter hooks before IPsec transforms. Packets visit the FORWARD/LOCAL_OUT and POST_ROUTING hook before the first encapsulation and the LOCAL_OUT and POST_ROUTING hook before each following tunnel mode transform. Patch from Herbert Xu <herbert@gondor.apana.org.au>: Move the loop from dst_output into xfrm4_output/xfrm6_output since they're the only ones who need to it. xfrm{4,6}_output_one() processes the first SA all subsequent transport mode SAs and is called in a loop that calls the netfilter hooks between each two calls. In order to avoid the tail call issue, I've added the inline function nf_hook which is nf_hook_slow plus the empty list check. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-06 23:01:48 -08:00
}
Reference in a new issue Copy permalink