| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | /*
 | 
					
						
							| 
									
										
										
										
											2008-02-24 14:26:03 +01:00
										 |  |  |  * Copyright (C) 2006, 2008 Atmel Corporation | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  |  * | 
					
						
							|  |  |  |  * This program is free software; you can redistribute it and/or modify | 
					
						
							|  |  |  |  * it under the terms of the GNU General Public License version 2 as | 
					
						
							|  |  |  |  * published by the Free Software Foundation. | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #include <linux/clk.h>
 | 
					
						
							|  |  |  | #include <linux/err.h>
 | 
					
						
							|  |  |  | #include <linux/init.h>
 | 
					
						
							|  |  |  | #include <linux/interrupt.h>
 | 
					
						
							|  |  |  | #include <linux/irq.h>
 | 
					
						
							|  |  |  | #include <linux/platform_device.h>
 | 
					
						
							| 
									
										
										
										
											2011-04-26 19:14:35 +02:00
										 |  |  | #include <linux/syscore_ops.h>
 | 
					
						
							| 
									
										
										
										
											2011-08-01 12:55:26 -04:00
										 |  |  | #include <linux/export.h>
 | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 
 | 
					
						
							|  |  |  | #include <asm/io.h>
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #include "intc.h"
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | struct intc { | 
					
						
							| 
									
										
										
										
											2008-02-24 14:26:03 +01:00
										 |  |  | 	void __iomem		*regs; | 
					
						
							|  |  |  | 	struct irq_chip		chip; | 
					
						
							| 
									
										
										
										
											2008-02-24 13:51:38 +01:00
										 |  |  | #ifdef CONFIG_PM
 | 
					
						
							|  |  |  | 	unsigned long		suspend_ipr; | 
					
						
							|  |  |  | 	unsigned long		saved_ipr[64]; | 
					
						
							|  |  |  | #endif
 | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | extern struct platform_device at32_intc0_device; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /*
 | 
					
						
							|  |  |  |  * TODO: We may be able to implement mask/unmask by setting IxM flags | 
					
						
							|  |  |  |  * in the status register. | 
					
						
							|  |  |  |  */ | 
					
						
							| 
									
										
										
										
											2011-02-06 17:29:02 +01:00
										 |  |  | static void intc_mask_irq(struct irq_data *d) | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | { | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-02-06 17:29:02 +01:00
										 |  |  | static void intc_unmask_irq(struct irq_data *d) | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | { | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static struct intc intc0 = { | 
					
						
							|  |  |  | 	.chip = { | 
					
						
							|  |  |  | 		.name		= "intc", | 
					
						
							| 
									
										
										
										
											2011-02-06 17:29:02 +01:00
										 |  |  | 		.irq_mask	= intc_mask_irq, | 
					
						
							|  |  |  | 		.irq_unmask	= intc_unmask_irq, | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 	}, | 
					
						
							|  |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /*
 | 
					
						
							|  |  |  |  * All interrupts go via intc at some point. | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | asmlinkage void do_IRQ(int level, struct pt_regs *regs) | 
					
						
							|  |  |  | { | 
					
						
							| 
									
										
										
										
											2006-10-11 01:20:37 -07:00
										 |  |  | 	struct pt_regs *old_regs; | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 	unsigned int irq; | 
					
						
							|  |  |  | 	unsigned long status_reg; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	local_irq_disable(); | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2006-10-11 01:20:37 -07:00
										 |  |  | 	old_regs = set_irq_regs(regs); | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 	irq_enter(); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	irq = intc_readl(&intc0, INTCAUSE0 - 4 * level); | 
					
						
							| 
									
										
										
										
											2011-02-06 17:29:02 +01:00
										 |  |  | 	generic_handle_irq(irq); | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 
 | 
					
						
							|  |  |  | 	/*
 | 
					
						
							|  |  |  | 	 * Clear all interrupt level masks so that we may handle | 
					
						
							|  |  |  | 	 * interrupts during softirq processing.  If this is a nested | 
					
						
							|  |  |  | 	 * interrupt, interrupts must stay globally disabled until we | 
					
						
							|  |  |  | 	 * return. | 
					
						
							|  |  |  | 	 */ | 
					
						
							|  |  |  | 	status_reg = sysreg_read(SR); | 
					
						
							|  |  |  | 	status_reg &= ~(SYSREG_BIT(I0M) | SYSREG_BIT(I1M) | 
					
						
							|  |  |  | 			| SYSREG_BIT(I2M) | SYSREG_BIT(I3M)); | 
					
						
							|  |  |  | 	sysreg_write(SR, status_reg); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	irq_exit(); | 
					
						
							| 
									
										
										
										
											2006-10-11 01:20:37 -07:00
										 |  |  | 
 | 
					
						
							|  |  |  | 	set_irq_regs(old_regs); | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | void __init init_IRQ(void) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	extern void _evba(void); | 
					
						
							|  |  |  | 	extern void irq_level0(void); | 
					
						
							|  |  |  | 	struct resource *regs; | 
					
						
							|  |  |  | 	struct clk *pclk; | 
					
						
							|  |  |  | 	unsigned int i; | 
					
						
							|  |  |  | 	u32 offset, readback; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	regs = platform_get_resource(&at32_intc0_device, IORESOURCE_MEM, 0); | 
					
						
							|  |  |  | 	if (!regs) { | 
					
						
							|  |  |  | 		printk(KERN_EMERG "intc: no mmio resource defined\n"); | 
					
						
							|  |  |  | 		goto fail; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 	pclk = clk_get(&at32_intc0_device.dev, "pclk"); | 
					
						
							|  |  |  | 	if (IS_ERR(pclk)) { | 
					
						
							|  |  |  | 		printk(KERN_EMERG "intc: no clock defined\n"); | 
					
						
							|  |  |  | 		goto fail; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	clk_enable(pclk); | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-06-09 09:13:32 -07:00
										 |  |  | 	intc0.regs = ioremap(regs->start, resource_size(regs)); | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 	if (!intc0.regs) { | 
					
						
							|  |  |  | 		printk(KERN_EMERG "intc: failed to map registers (0x%08lx)\n", | 
					
						
							|  |  |  | 		       (unsigned long)regs->start); | 
					
						
							|  |  |  | 		goto fail; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	/*
 | 
					
						
							|  |  |  | 	 * Initialize all interrupts to level 0 (lowest priority). The | 
					
						
							|  |  |  | 	 * priority level may be changed by calling | 
					
						
							|  |  |  | 	 * irq_set_priority(). | 
					
						
							|  |  |  | 	 * | 
					
						
							|  |  |  | 	 */ | 
					
						
							|  |  |  | 	offset = (unsigned long)&irq_level0 - (unsigned long)&_evba; | 
					
						
							|  |  |  | 	for (i = 0; i < NR_INTERNAL_IRQS; i++) { | 
					
						
							|  |  |  | 		intc_writel(&intc0, INTPR0 + 4 * i, offset); | 
					
						
							|  |  |  | 		readback = intc_readl(&intc0, INTPR0 + 4 * i); | 
					
						
							|  |  |  | 		if (readback == offset) | 
					
						
							| 
									
										
										
										
											2011-03-24 16:39:32 +01:00
										 |  |  | 			irq_set_chip_and_handler(i, &intc0.chip, | 
					
						
							| 
									
										
											  
											
												[PATCH] avr32 architecture
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000
CPU and the AT32STK1000 development board.
AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for
cost-sensitive embedded applications, with particular emphasis on low power
consumption and high code density.  The AVR32 architecture is not binary
compatible with earlier 8-bit AVR architectures.
The AVR32 architecture, including the instruction set, is described by the
AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture.  It
features a 7-stage pipeline, 16KB instruction and data caches and a full
Memory Management Unit.  It also comes with a large set of integrated
peripherals, many of which are shared with the AT91 ARM-based controllers from
Atmel.
Full data sheet is available from
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
while the CPU core implementation including caches and MMU is documented by
the AVR32 AP Technical Reference, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
Information about the AT32STK1000 development board can be found at
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
including a BSP CD image with an earlier version of this patch, development
tools (binaries and source/patches) and a root filesystem image suitable for
booting from SD card.
Alternatively, there's a preliminary "getting started" guide available at
http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links
to the sources and patches you will need in order to set up a cross-compiling
environment for avr32-linux.
This patch, as well as the other patches included with the BSP and the
toolchain patches, is actively supported by Atmel Corporation.
[dmccr@us.ibm.com: Fix more pxx_page macro locations]
[bunk@stusta.de: fix `make defconfig']
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
											
										 
											2006-09-25 23:32:13 -07:00
										 |  |  | 						 handle_simple_irq); | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	/* Unmask all interrupt levels */ | 
					
						
							|  |  |  | 	sysreg_write(SR, (sysreg_read(SR) | 
					
						
							|  |  |  | 			  & ~(SR_I3M | SR_I2M | SR_I1M | SR_I0M))); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | fail: | 
					
						
							|  |  |  | 	panic("Interrupt controller initialization failed!\n"); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2008-02-24 13:51:38 +01:00
										 |  |  | #ifdef CONFIG_PM
 | 
					
						
							|  |  |  | void intc_set_suspend_handler(unsigned long offset) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	intc0.suspend_ipr = offset; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-04-26 19:14:35 +02:00
										 |  |  | static int intc_suspend(void) | 
					
						
							| 
									
										
										
										
											2008-02-24 13:51:38 +01:00
										 |  |  | { | 
					
						
							|  |  |  | 	int i; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if (unlikely(!irqs_disabled())) { | 
					
						
							|  |  |  | 		pr_err("intc_suspend: called with interrupts enabled\n"); | 
					
						
							|  |  |  | 		return -EINVAL; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-04-26 19:14:35 +02:00
										 |  |  | 	if (unlikely(!intc0.suspend_ipr)) { | 
					
						
							| 
									
										
										
										
											2008-02-24 13:51:38 +01:00
										 |  |  | 		pr_err("intc_suspend: suspend_ipr not initialized\n"); | 
					
						
							|  |  |  | 		return -EINVAL; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	for (i = 0; i < 64; i++) { | 
					
						
							| 
									
										
										
										
											2011-04-26 19:14:35 +02:00
										 |  |  | 		intc0.saved_ipr[i] = intc_readl(&intc0, INTPR0 + 4 * i); | 
					
						
							|  |  |  | 		intc_writel(&intc0, INTPR0 + 4 * i, intc0.suspend_ipr); | 
					
						
							| 
									
										
										
										
											2008-02-24 13:51:38 +01:00
										 |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return 0; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-06-06 18:19:20 +02:00
										 |  |  | static void intc_resume(void) | 
					
						
							| 
									
										
										
										
											2008-02-24 13:51:38 +01:00
										 |  |  | { | 
					
						
							|  |  |  | 	int i; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	for (i = 0; i < 64; i++) | 
					
						
							| 
									
										
										
										
											2011-04-26 19:14:35 +02:00
										 |  |  | 		intc_writel(&intc0, INTPR0 + 4 * i, intc0.saved_ipr[i]); | 
					
						
							| 
									
										
										
										
											2008-02-24 13:51:38 +01:00
										 |  |  | } | 
					
						
							|  |  |  | #else
 | 
					
						
							|  |  |  | #define intc_suspend	NULL
 | 
					
						
							|  |  |  | #define intc_resume	NULL
 | 
					
						
							|  |  |  | #endif
 | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-04-26 19:14:35 +02:00
										 |  |  | static struct syscore_ops intc_syscore_ops = { | 
					
						
							| 
									
										
										
										
											2008-02-24 13:51:38 +01:00
										 |  |  | 	.suspend	= intc_suspend, | 
					
						
							|  |  |  | 	.resume		= intc_resume, | 
					
						
							| 
									
										
										
										
											2008-02-24 14:26:03 +01:00
										 |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-04-26 19:14:35 +02:00
										 |  |  | static int __init intc_init_syscore(void) | 
					
						
							| 
									
										
										
										
											2008-02-24 14:26:03 +01:00
										 |  |  | { | 
					
						
							| 
									
										
										
										
											2011-04-26 19:14:35 +02:00
										 |  |  | 	register_syscore_ops(&intc_syscore_ops); | 
					
						
							| 
									
										
										
										
											2008-02-24 14:26:03 +01:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2011-04-26 19:14:35 +02:00
										 |  |  | 	return 0; | 
					
						
							| 
									
										
										
										
											2008-02-24 14:26:03 +01:00
										 |  |  | } | 
					
						
							| 
									
										
										
										
											2011-04-26 19:14:35 +02:00
										 |  |  | device_initcall(intc_init_syscore); | 
					
						
							| 
									
										
										
										
											2008-02-24 14:26:03 +01:00
										 |  |  | 
 | 
					
						
							| 
									
										
										
										
											2007-10-31 20:34:11 +01:00
										 |  |  | unsigned long intc_get_pending(unsigned int group) | 
					
						
							| 
									
										
										
										
											2006-12-08 11:04:19 +01:00
										 |  |  | { | 
					
						
							|  |  |  | 	return intc_readl(&intc0, INTREQ0 + 4 * group); | 
					
						
							|  |  |  | } | 
					
						
							| 
									
										
										
										
											2007-10-31 20:34:11 +01:00
										 |  |  | EXPORT_SYMBOL_GPL(intc_get_pending); |