| 
									
										
										
										
											2011-06-28 15:11:23 +00:00
										 |  |  | /*
 | 
					
						
							|  |  |  |  * Copyright (C) 2011 Alexander Stein <alexander.stein@systec-electronic.com> | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * The LM95245 is a sensor chip made by National Semiconductors. | 
					
						
							|  |  |  |  * It reports up to two temperatures (its own plus an external one). | 
					
						
							|  |  |  |  * Complete datasheet can be obtained from National's website at: | 
					
						
							|  |  |  |  *   http://www.national.com/ds.cgi/LM/LM95245.pdf
 | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * This driver is based on lm95241.c | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * This program is free software; you can redistribute it and/or modify | 
					
						
							|  |  |  |  * it under the terms of the GNU General Public License as published by | 
					
						
							|  |  |  |  * the Free Software Foundation; either version 2 of the License, or | 
					
						
							|  |  |  |  * (at your option) any later version. | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * This program is distributed in the hope that it will be useful, | 
					
						
							|  |  |  |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
					
						
							|  |  |  |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
					
						
							|  |  |  |  * GNU General Public License for more details. | 
					
						
							|  |  |  |  * | 
					
						
							|  |  |  |  * You should have received a copy of the GNU General Public License | 
					
						
							|  |  |  |  * along with this program; if not, write to the Free Software | 
					
						
							|  |  |  |  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
					
						
							|  |  |  |  */ | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #include <linux/module.h>
 | 
					
						
							|  |  |  | #include <linux/init.h>
 | 
					
						
							|  |  |  | #include <linux/slab.h>
 | 
					
						
							|  |  |  | #include <linux/jiffies.h>
 | 
					
						
							|  |  |  | #include <linux/i2c.h>
 | 
					
						
							|  |  |  | #include <linux/hwmon.h>
 | 
					
						
							|  |  |  | #include <linux/hwmon-sysfs.h>
 | 
					
						
							|  |  |  | #include <linux/err.h>
 | 
					
						
							|  |  |  | #include <linux/mutex.h>
 | 
					
						
							|  |  |  | #include <linux/sysfs.h>
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define DEVNAME "lm95245"
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static const unsigned short normal_i2c[] = { | 
					
						
							|  |  |  | 	0x18, 0x19, 0x29, 0x4c, 0x4d, I2C_CLIENT_END }; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* LM95245 registers */ | 
					
						
							|  |  |  | /* general registers */ | 
					
						
							|  |  |  | #define LM95245_REG_RW_CONFIG1		0x03
 | 
					
						
							|  |  |  | #define LM95245_REG_RW_CONVERS_RATE	0x04
 | 
					
						
							|  |  |  | #define LM95245_REG_W_ONE_SHOT		0x0F
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* diode configuration */ | 
					
						
							|  |  |  | #define LM95245_REG_RW_CONFIG2		0xBF
 | 
					
						
							|  |  |  | #define LM95245_REG_RW_REMOTE_OFFH	0x11
 | 
					
						
							|  |  |  | #define LM95245_REG_RW_REMOTE_OFFL	0x12
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* status registers */ | 
					
						
							|  |  |  | #define LM95245_REG_R_STATUS1		0x02
 | 
					
						
							|  |  |  | #define LM95245_REG_R_STATUS2		0x33
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* limit registers */ | 
					
						
							|  |  |  | #define LM95245_REG_RW_REMOTE_OS_LIMIT		0x07
 | 
					
						
							|  |  |  | #define LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT	0x20
 | 
					
						
							|  |  |  | #define LM95245_REG_RW_REMOTE_TCRIT_LIMIT	0x19
 | 
					
						
							|  |  |  | #define LM95245_REG_RW_COMMON_HYSTERESIS	0x21
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* temperature signed */ | 
					
						
							|  |  |  | #define LM95245_REG_R_LOCAL_TEMPH_S	0x00
 | 
					
						
							|  |  |  | #define LM95245_REG_R_LOCAL_TEMPL_S	0x30
 | 
					
						
							|  |  |  | #define LM95245_REG_R_REMOTE_TEMPH_S	0x01
 | 
					
						
							|  |  |  | #define LM95245_REG_R_REMOTE_TEMPL_S	0x10
 | 
					
						
							|  |  |  | /* temperature unsigned */ | 
					
						
							|  |  |  | #define LM95245_REG_R_REMOTE_TEMPH_U	0x31
 | 
					
						
							|  |  |  | #define LM95245_REG_R_REMOTE_TEMPL_U	0x32
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* id registers */ | 
					
						
							|  |  |  | #define LM95245_REG_R_MAN_ID		0xFE
 | 
					
						
							|  |  |  | #define LM95245_REG_R_CHIP_ID		0xFF
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* LM95245 specific bitfields */ | 
					
						
							|  |  |  | #define CFG_STOP		0x40
 | 
					
						
							|  |  |  | #define CFG_REMOTE_TCRIT_MASK	0x10
 | 
					
						
							|  |  |  | #define CFG_REMOTE_OS_MASK	0x08
 | 
					
						
							|  |  |  | #define CFG_LOCAL_TCRIT_MASK	0x04
 | 
					
						
							|  |  |  | #define CFG_LOCAL_OS_MASK	0x02
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define CFG2_OS_A0		0x40
 | 
					
						
							|  |  |  | #define CFG2_DIODE_FAULT_OS	0x20
 | 
					
						
							|  |  |  | #define CFG2_DIODE_FAULT_TCRIT	0x10
 | 
					
						
							|  |  |  | #define CFG2_REMOTE_TT		0x08
 | 
					
						
							|  |  |  | #define CFG2_REMOTE_FILTER_DIS	0x00
 | 
					
						
							|  |  |  | #define CFG2_REMOTE_FILTER_EN	0x06
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* conversation rate in ms */ | 
					
						
							|  |  |  | #define RATE_CR0063	0x00
 | 
					
						
							|  |  |  | #define RATE_CR0364	0x01
 | 
					
						
							|  |  |  | #define RATE_CR1000	0x02
 | 
					
						
							|  |  |  | #define RATE_CR2500	0x03
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define STATUS1_DIODE_FAULT	0x04
 | 
					
						
							|  |  |  | #define STATUS1_RTCRIT		0x02
 | 
					
						
							|  |  |  | #define STATUS1_LOC		0x01
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | #define MANUFACTURER_ID		0x01
 | 
					
						
							|  |  |  | #define DEFAULT_REVISION	0xB3
 | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static const u8 lm95245_reg_address[] = { | 
					
						
							|  |  |  | 	LM95245_REG_R_LOCAL_TEMPH_S, | 
					
						
							|  |  |  | 	LM95245_REG_R_LOCAL_TEMPL_S, | 
					
						
							|  |  |  | 	LM95245_REG_R_REMOTE_TEMPH_S, | 
					
						
							|  |  |  | 	LM95245_REG_R_REMOTE_TEMPL_S, | 
					
						
							|  |  |  | 	LM95245_REG_R_REMOTE_TEMPH_U, | 
					
						
							|  |  |  | 	LM95245_REG_R_REMOTE_TEMPL_U, | 
					
						
							|  |  |  | 	LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT, | 
					
						
							|  |  |  | 	LM95245_REG_RW_REMOTE_TCRIT_LIMIT, | 
					
						
							|  |  |  | 	LM95245_REG_RW_COMMON_HYSTERESIS, | 
					
						
							|  |  |  | 	LM95245_REG_R_STATUS1, | 
					
						
							|  |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* Client data (each client gets its own) */ | 
					
						
							|  |  |  | struct lm95245_data { | 
					
						
							|  |  |  | 	struct device *hwmon_dev; | 
					
						
							|  |  |  | 	struct mutex update_lock; | 
					
						
							|  |  |  | 	unsigned long last_updated;	/* in jiffies */ | 
					
						
							|  |  |  | 	unsigned long interval;	/* in msecs */ | 
					
						
							|  |  |  | 	bool valid;		/* zero until following fields are valid */ | 
					
						
							|  |  |  | 	/* registers values */ | 
					
						
							|  |  |  | 	u8 regs[ARRAY_SIZE(lm95245_reg_address)]; | 
					
						
							|  |  |  | 	u8 config1, config2; | 
					
						
							|  |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* Conversions */ | 
					
						
							|  |  |  | static int temp_from_reg_unsigned(u8 val_h, u8 val_l) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	return val_h * 1000 + val_l * 1000 / 256; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static int temp_from_reg_signed(u8 val_h, u8 val_l) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	if (val_h & 0x80) | 
					
						
							|  |  |  | 		return (val_h - 0x100) * 1000; | 
					
						
							|  |  |  | 	return temp_from_reg_unsigned(val_h, val_l); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static struct lm95245_data *lm95245_update_device(struct device *dev) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct i2c_client *client = to_i2c_client(dev); | 
					
						
							|  |  |  | 	struct lm95245_data *data = i2c_get_clientdata(client); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	mutex_lock(&data->update_lock); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if (time_after(jiffies, data->last_updated | 
					
						
							|  |  |  | 		+ msecs_to_jiffies(data->interval)) || !data->valid) { | 
					
						
							|  |  |  | 		int i; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 		dev_dbg(&client->dev, "Updating lm95245 data.\n"); | 
					
						
							|  |  |  | 		for (i = 0; i < ARRAY_SIZE(lm95245_reg_address); i++) | 
					
						
							|  |  |  | 			data->regs[i] | 
					
						
							|  |  |  | 			  = i2c_smbus_read_byte_data(client, | 
					
						
							|  |  |  | 						     lm95245_reg_address[i]); | 
					
						
							|  |  |  | 		data->last_updated = jiffies; | 
					
						
							|  |  |  | 		data->valid = 1; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	mutex_unlock(&data->update_lock); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return data; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static unsigned long lm95245_read_conversion_rate(struct i2c_client *client) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	int rate; | 
					
						
							|  |  |  | 	unsigned long interval; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	rate = i2c_smbus_read_byte_data(client, LM95245_REG_RW_CONVERS_RATE); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	switch (rate) { | 
					
						
							|  |  |  | 	case RATE_CR0063: | 
					
						
							|  |  |  | 		interval = 63; | 
					
						
							|  |  |  | 		break; | 
					
						
							|  |  |  | 	case RATE_CR0364: | 
					
						
							|  |  |  | 		interval = 364; | 
					
						
							|  |  |  | 		break; | 
					
						
							|  |  |  | 	case RATE_CR1000: | 
					
						
							|  |  |  | 		interval = 1000; | 
					
						
							|  |  |  | 		break; | 
					
						
							|  |  |  | 	case RATE_CR2500: | 
					
						
							|  |  |  | 	default: | 
					
						
							|  |  |  | 		interval = 2500; | 
					
						
							|  |  |  | 		break; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return interval; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static unsigned long lm95245_set_conversion_rate(struct i2c_client *client, | 
					
						
							|  |  |  | 			unsigned long interval) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	int rate; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if (interval <= 63) { | 
					
						
							|  |  |  | 		interval = 63; | 
					
						
							|  |  |  | 		rate = RATE_CR0063; | 
					
						
							|  |  |  | 	} else if (interval <= 364) { | 
					
						
							|  |  |  | 		interval = 364; | 
					
						
							|  |  |  | 		rate = RATE_CR0364; | 
					
						
							|  |  |  | 	} else if (interval <= 1000) { | 
					
						
							|  |  |  | 		interval = 1000; | 
					
						
							|  |  |  | 		rate = RATE_CR1000; | 
					
						
							|  |  |  | 	} else { | 
					
						
							|  |  |  | 		interval = 2500; | 
					
						
							|  |  |  | 		rate = RATE_CR2500; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	i2c_smbus_write_byte_data(client, LM95245_REG_RW_CONVERS_RATE, rate); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return interval; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* Sysfs stuff */ | 
					
						
							|  |  |  | static ssize_t show_input(struct device *dev, struct device_attribute *attr, | 
					
						
							|  |  |  | 			  char *buf) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct lm95245_data *data = lm95245_update_device(dev); | 
					
						
							|  |  |  | 	int temp; | 
					
						
							|  |  |  | 	int index = to_sensor_dev_attr(attr)->index; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	/*
 | 
					
						
							|  |  |  | 	 * Index 0 (Local temp) is always signed | 
					
						
							|  |  |  | 	 * Index 2 (Remote temp) has both signed and unsigned data | 
					
						
							|  |  |  | 	 * use signed calculation for remote if signed bit is set | 
					
						
							|  |  |  | 	 */ | 
					
						
							|  |  |  | 	if (index == 0 || data->regs[index] & 0x80) | 
					
						
							|  |  |  | 		temp = temp_from_reg_signed(data->regs[index], | 
					
						
							|  |  |  | 			    data->regs[index + 1]); | 
					
						
							|  |  |  | 	else | 
					
						
							|  |  |  | 		temp = temp_from_reg_unsigned(data->regs[index + 2], | 
					
						
							|  |  |  | 			    data->regs[index + 3]); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return snprintf(buf, PAGE_SIZE - 1, "%d\n", temp); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static ssize_t show_limit(struct device *dev, struct device_attribute *attr, | 
					
						
							|  |  |  | 			 char *buf) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct lm95245_data *data = lm95245_update_device(dev); | 
					
						
							|  |  |  | 	int index = to_sensor_dev_attr(attr)->index; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return snprintf(buf, PAGE_SIZE - 1, "%d\n", | 
					
						
							|  |  |  | 			data->regs[index] * 1000); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static ssize_t set_limit(struct device *dev, struct device_attribute *attr, | 
					
						
							|  |  |  | 			const char *buf, size_t count) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct i2c_client *client = to_i2c_client(dev); | 
					
						
							|  |  |  | 	struct lm95245_data *data = i2c_get_clientdata(client); | 
					
						
							|  |  |  | 	int index = to_sensor_dev_attr(attr)->index; | 
					
						
							|  |  |  | 	unsigned long val; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-01-04 20:58:52 +01:00
										 |  |  | 	if (kstrtoul(buf, 10, &val) < 0) | 
					
						
							| 
									
										
										
										
											2011-06-28 15:11:23 +00:00
										 |  |  | 		return -EINVAL; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	val /= 1000; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	val = SENSORS_LIMIT(val, 0, (index == 6 ? 127 : 255)); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	mutex_lock(&data->update_lock); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	data->valid = 0; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	i2c_smbus_write_byte_data(client, lm95245_reg_address[index], val); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	mutex_unlock(&data->update_lock); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return count; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static ssize_t set_crit_hyst(struct device *dev, struct device_attribute *attr, | 
					
						
							|  |  |  | 			const char *buf, size_t count) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct i2c_client *client = to_i2c_client(dev); | 
					
						
							|  |  |  | 	struct lm95245_data *data = i2c_get_clientdata(client); | 
					
						
							|  |  |  | 	unsigned long val; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-01-04 20:58:52 +01:00
										 |  |  | 	if (kstrtoul(buf, 10, &val) < 0) | 
					
						
							| 
									
										
										
										
											2011-06-28 15:11:23 +00:00
										 |  |  | 		return -EINVAL; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	val /= 1000; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	val = SENSORS_LIMIT(val, 0, 31); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	mutex_lock(&data->update_lock); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	data->valid = 0; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	/* shared crit hysteresis */ | 
					
						
							|  |  |  | 	i2c_smbus_write_byte_data(client, LM95245_REG_RW_COMMON_HYSTERESIS, | 
					
						
							|  |  |  | 		val); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	mutex_unlock(&data->update_lock); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return count; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static ssize_t show_type(struct device *dev, struct device_attribute *attr, | 
					
						
							|  |  |  | 			 char *buf) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct i2c_client *client = to_i2c_client(dev); | 
					
						
							|  |  |  | 	struct lm95245_data *data = i2c_get_clientdata(client); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return snprintf(buf, PAGE_SIZE - 1, | 
					
						
							|  |  |  | 		data->config2 & CFG2_REMOTE_TT ? "1\n" : "2\n"); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static ssize_t set_type(struct device *dev, struct device_attribute *attr, | 
					
						
							|  |  |  | 			const char *buf, size_t count) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct i2c_client *client = to_i2c_client(dev); | 
					
						
							|  |  |  | 	struct lm95245_data *data = i2c_get_clientdata(client); | 
					
						
							|  |  |  | 	unsigned long val; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-01-04 20:58:52 +01:00
										 |  |  | 	if (kstrtoul(buf, 10, &val) < 0) | 
					
						
							| 
									
										
										
										
											2011-06-28 15:11:23 +00:00
										 |  |  | 		return -EINVAL; | 
					
						
							|  |  |  | 	if (val != 1 && val != 2) | 
					
						
							|  |  |  | 		return -EINVAL; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	mutex_lock(&data->update_lock); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if (val == 1) | 
					
						
							|  |  |  | 		data->config2 |= CFG2_REMOTE_TT; | 
					
						
							|  |  |  | 	else | 
					
						
							|  |  |  | 		data->config2 &= ~CFG2_REMOTE_TT; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	data->valid = 0; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	i2c_smbus_write_byte_data(client, LM95245_REG_RW_CONFIG2, | 
					
						
							|  |  |  | 				  data->config2); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	mutex_unlock(&data->update_lock); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return count; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, | 
					
						
							|  |  |  | 			 char *buf) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct lm95245_data *data = lm95245_update_device(dev); | 
					
						
							|  |  |  | 	int index = to_sensor_dev_attr(attr)->index; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return snprintf(buf, PAGE_SIZE - 1, "%d\n", | 
					
						
							|  |  |  | 			!!(data->regs[9] & index)); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static ssize_t show_interval(struct device *dev, struct device_attribute *attr, | 
					
						
							|  |  |  | 			     char *buf) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct lm95245_data *data = lm95245_update_device(dev); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return snprintf(buf, PAGE_SIZE - 1, "%lu\n", data->interval); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static ssize_t set_interval(struct device *dev, struct device_attribute *attr, | 
					
						
							|  |  |  | 			    const char *buf, size_t count) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct i2c_client *client = to_i2c_client(dev); | 
					
						
							|  |  |  | 	struct lm95245_data *data = i2c_get_clientdata(client); | 
					
						
							|  |  |  | 	unsigned long val; | 
					
						
							|  |  |  | 
 | 
					
						
							| 
									
										
										
										
											2012-01-04 20:58:52 +01:00
										 |  |  | 	if (kstrtoul(buf, 10, &val) < 0) | 
					
						
							| 
									
										
										
										
											2011-06-28 15:11:23 +00:00
										 |  |  | 		return -EINVAL; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	mutex_lock(&data->update_lock); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	data->interval = lm95245_set_conversion_rate(client, val); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	mutex_unlock(&data->update_lock); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return count; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_input, NULL, 0); | 
					
						
							|  |  |  | static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_limit, | 
					
						
							|  |  |  | 		set_limit, 6); | 
					
						
							|  |  |  | static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_limit, | 
					
						
							|  |  |  | 		set_crit_hyst, 8); | 
					
						
							|  |  |  | static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, | 
					
						
							|  |  |  | 		STATUS1_LOC); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_input, NULL, 2); | 
					
						
							|  |  |  | static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_limit, | 
					
						
							|  |  |  | 		set_limit, 7); | 
					
						
							|  |  |  | static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_limit, | 
					
						
							|  |  |  | 		set_crit_hyst, 8); | 
					
						
							|  |  |  | static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, | 
					
						
							|  |  |  | 		STATUS1_RTCRIT); | 
					
						
							|  |  |  | static SENSOR_DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type, | 
					
						
							|  |  |  | 		set_type, 0); | 
					
						
							|  |  |  | static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, | 
					
						
							|  |  |  | 		STATUS1_DIODE_FAULT); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval, | 
					
						
							|  |  |  | 		set_interval); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static struct attribute *lm95245_attributes[] = { | 
					
						
							|  |  |  | 	&sensor_dev_attr_temp1_input.dev_attr.attr, | 
					
						
							|  |  |  | 	&sensor_dev_attr_temp1_crit.dev_attr.attr, | 
					
						
							|  |  |  | 	&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, | 
					
						
							|  |  |  | 	&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, | 
					
						
							|  |  |  | 	&sensor_dev_attr_temp2_input.dev_attr.attr, | 
					
						
							|  |  |  | 	&sensor_dev_attr_temp2_crit.dev_attr.attr, | 
					
						
							|  |  |  | 	&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr, | 
					
						
							|  |  |  | 	&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, | 
					
						
							|  |  |  | 	&sensor_dev_attr_temp2_type.dev_attr.attr, | 
					
						
							|  |  |  | 	&sensor_dev_attr_temp2_fault.dev_attr.attr, | 
					
						
							|  |  |  | 	&dev_attr_update_interval.attr, | 
					
						
							|  |  |  | 	NULL | 
					
						
							|  |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static const struct attribute_group lm95245_group = { | 
					
						
							|  |  |  | 	.attrs = lm95245_attributes, | 
					
						
							|  |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* Return 0 if detection is successful, -ENODEV otherwise */ | 
					
						
							|  |  |  | static int lm95245_detect(struct i2c_client *new_client, | 
					
						
							|  |  |  | 			  struct i2c_board_info *info) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct i2c_adapter *adapter = new_client->adapter; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | 
					
						
							|  |  |  | 		return -ENODEV; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if (i2c_smbus_read_byte_data(new_client, LM95245_REG_R_MAN_ID) | 
					
						
							|  |  |  | 			!= MANUFACTURER_ID | 
					
						
							|  |  |  | 		|| i2c_smbus_read_byte_data(new_client, LM95245_REG_R_CHIP_ID) | 
					
						
							|  |  |  | 			!= DEFAULT_REVISION) | 
					
						
							|  |  |  | 		return -ENODEV; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	strlcpy(info->type, DEVNAME, I2C_NAME_SIZE); | 
					
						
							|  |  |  | 	return 0; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static void lm95245_init_client(struct i2c_client *client) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct lm95245_data *data = i2c_get_clientdata(client); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	data->valid = 0; | 
					
						
							|  |  |  | 	data->interval = lm95245_read_conversion_rate(client); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	data->config1 = i2c_smbus_read_byte_data(client, | 
					
						
							|  |  |  | 		LM95245_REG_RW_CONFIG1); | 
					
						
							|  |  |  | 	data->config2 = i2c_smbus_read_byte_data(client, | 
					
						
							|  |  |  | 		LM95245_REG_RW_CONFIG2); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	if (data->config1 & CFG_STOP) { | 
					
						
							|  |  |  | 		/* Clear the standby bit */ | 
					
						
							|  |  |  | 		data->config1 &= ~CFG_STOP; | 
					
						
							|  |  |  | 		i2c_smbus_write_byte_data(client, LM95245_REG_RW_CONFIG1, | 
					
						
							|  |  |  | 			data->config1); | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static int lm95245_probe(struct i2c_client *new_client, | 
					
						
							|  |  |  | 			 const struct i2c_device_id *id) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct lm95245_data *data; | 
					
						
							|  |  |  | 	int err; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	data = kzalloc(sizeof(struct lm95245_data), GFP_KERNEL); | 
					
						
							|  |  |  | 	if (!data) { | 
					
						
							|  |  |  | 		err = -ENOMEM; | 
					
						
							|  |  |  | 		goto exit; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	i2c_set_clientdata(new_client, data); | 
					
						
							|  |  |  | 	mutex_init(&data->update_lock); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	/* Initialize the LM95245 chip */ | 
					
						
							|  |  |  | 	lm95245_init_client(new_client); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	/* Register sysfs hooks */ | 
					
						
							|  |  |  | 	err = sysfs_create_group(&new_client->dev.kobj, &lm95245_group); | 
					
						
							|  |  |  | 	if (err) | 
					
						
							|  |  |  | 		goto exit_free; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	data->hwmon_dev = hwmon_device_register(&new_client->dev); | 
					
						
							|  |  |  | 	if (IS_ERR(data->hwmon_dev)) { | 
					
						
							|  |  |  | 		err = PTR_ERR(data->hwmon_dev); | 
					
						
							|  |  |  | 		goto exit_remove_files; | 
					
						
							|  |  |  | 	} | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	return 0; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | exit_remove_files: | 
					
						
							|  |  |  | 	sysfs_remove_group(&new_client->dev.kobj, &lm95245_group); | 
					
						
							|  |  |  | exit_free: | 
					
						
							|  |  |  | 	kfree(data); | 
					
						
							|  |  |  | exit: | 
					
						
							|  |  |  | 	return err; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static int lm95245_remove(struct i2c_client *client) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	struct lm95245_data *data = i2c_get_clientdata(client); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	hwmon_device_unregister(data->hwmon_dev); | 
					
						
							|  |  |  | 	sysfs_remove_group(&client->dev.kobj, &lm95245_group); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | 	kfree(data); | 
					
						
							|  |  |  | 	return 0; | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | /* Driver data (common to all clients) */ | 
					
						
							|  |  |  | static const struct i2c_device_id lm95245_id[] = { | 
					
						
							|  |  |  | 	{ DEVNAME, 0 }, | 
					
						
							|  |  |  | 	{ } | 
					
						
							|  |  |  | }; | 
					
						
							|  |  |  | MODULE_DEVICE_TABLE(i2c, lm95245_id); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static struct i2c_driver lm95245_driver = { | 
					
						
							|  |  |  | 	.class		= I2C_CLASS_HWMON, | 
					
						
							|  |  |  | 	.driver = { | 
					
						
							|  |  |  | 		.name	= DEVNAME, | 
					
						
							|  |  |  | 	}, | 
					
						
							|  |  |  | 	.probe		= lm95245_probe, | 
					
						
							|  |  |  | 	.remove		= lm95245_remove, | 
					
						
							|  |  |  | 	.id_table	= lm95245_id, | 
					
						
							|  |  |  | 	.detect		= lm95245_detect, | 
					
						
							|  |  |  | 	.address_list	= normal_i2c, | 
					
						
							|  |  |  | }; | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static int __init sensors_lm95245_init(void) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	return i2c_add_driver(&lm95245_driver); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | static void __exit sensors_lm95245_exit(void) | 
					
						
							|  |  |  | { | 
					
						
							|  |  |  | 	i2c_del_driver(&lm95245_driver); | 
					
						
							|  |  |  | } | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | MODULE_AUTHOR("Alexander Stein <alexander.stein@systec-electronic.com>"); | 
					
						
							|  |  |  | MODULE_DESCRIPTION("LM95245 sensor driver"); | 
					
						
							|  |  |  | MODULE_LICENSE("GPL"); | 
					
						
							|  |  |  | 
 | 
					
						
							|  |  |  | module_init(sensors_lm95245_init); | 
					
						
							|  |  |  | module_exit(sensors_lm95245_exit); |