forge/linux-pinenote
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
linux-pinenote/arch/alpha/kernel/smc37c669.c

2555 lines
60 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* SMC 37C669 initialization code
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <asm/hwrpb.h>
#include <asm/io.h>
#include <asm/segment.h>
#if 0
# define DBG_DEVS(args) printk args
#else
# define DBG_DEVS(args)
#endif
#define KB 1024
#define MB (1024*KB)
#define GB (1024*MB)
#define SMC_DEBUG 0
/* File: smcc669_def.h
*
* Copyright (C) 1997 by
* Digital Equipment Corporation, Maynard, Massachusetts.
* All rights reserved.
*
* This software is furnished under a license and may be used and copied
* only in accordance of the terms of such license and with the
* inclusion of the above copyright notice. This software or any other
* copies thereof may not be provided or otherwise made available to any
* other person. No title to and ownership of the software is hereby
* transferred.
*
* The information in this software is subject to change without notice
* and should not be construed as a commitment by Digital Equipment
* Corporation.
*
* Digital assumes no responsibility for the use or reliability of its
* software on equipment which is not supplied by Digital.
*
*
* Abstract:
*
* This file contains header definitions for the SMC37c669
* Super I/O controller.
*
* Author:
*
* Eric Rasmussen
*
* Modification History:
*
* er 28-Jan-1997 Initial Entry
*/
#ifndef __SMC37c669_H
#define __SMC37c669_H
/*
** Macros for handling device IRQs
**
** The mask acts as a flag used in mapping actual ISA IRQs (0 - 15)
** to device IRQs (A - H).
*/
#define SMC37c669_DEVICE_IRQ_MASK 0x80000000
#define SMC37c669_DEVICE_IRQ( __i ) \
((SMC37c669_DEVICE_IRQ_MASK) | (__i))
#define SMC37c669_IS_DEVICE_IRQ(__i) \
(((__i) & (SMC37c669_DEVICE_IRQ_MASK)) == (SMC37c669_DEVICE_IRQ_MASK))
#define SMC37c669_RAW_DEVICE_IRQ(__i) \
((__i) & ~(SMC37c669_DEVICE_IRQ_MASK))
/*
** Macros for handling device DRQs
**
** The mask acts as a flag used in mapping actual ISA DMA
** channels to device DMA channels (A - C).
*/
#define SMC37c669_DEVICE_DRQ_MASK 0x80000000
#define SMC37c669_DEVICE_DRQ(__d) \
((SMC37c669_DEVICE_DRQ_MASK) | (__d))
#define SMC37c669_IS_DEVICE_DRQ(__d) \
(((__d) & (SMC37c669_DEVICE_DRQ_MASK)) == (SMC37c669_DEVICE_DRQ_MASK))
#define SMC37c669_RAW_DEVICE_DRQ(__d) \
((__d) & ~(SMC37c669_DEVICE_DRQ_MASK))
#define SMC37c669_DEVICE_ID 0x3
/*
** SMC37c669 Device Function Definitions
*/
#define SERIAL_0 0
#define SERIAL_1 1
#define PARALLEL_0 2
#define FLOPPY_0 3
#define IDE_0 4
#define NUM_FUNCS 5
/*
** Default Device Function Mappings
*/
#define COM1_BASE 0x3F8
#define COM1_IRQ 4
#define COM2_BASE 0x2F8
#define COM2_IRQ 3
#define PARP_BASE 0x3BC
#define PARP_IRQ 7
#define PARP_DRQ 3
#define FDC_BASE 0x3F0
#define FDC_IRQ 6
#define FDC_DRQ 2
/*
** Configuration On/Off Key Definitions
*/
#define SMC37c669_CONFIG_ON_KEY 0x55
#define SMC37c669_CONFIG_OFF_KEY 0xAA
/*
** SMC 37c669 Device IRQs
*/
#define SMC37c669_DEVICE_IRQ_A ( SMC37c669_DEVICE_IRQ( 0x01 ) )
#define SMC37c669_DEVICE_IRQ_B ( SMC37c669_DEVICE_IRQ( 0x02 ) )
#define SMC37c669_DEVICE_IRQ_C ( SMC37c669_DEVICE_IRQ( 0x03 ) )
#define SMC37c669_DEVICE_IRQ_D ( SMC37c669_DEVICE_IRQ( 0x04 ) )
#define SMC37c669_DEVICE_IRQ_E ( SMC37c669_DEVICE_IRQ( 0x05 ) )
#define SMC37c669_DEVICE_IRQ_F ( SMC37c669_DEVICE_IRQ( 0x06 ) )
/* SMC37c669_DEVICE_IRQ_G *** RESERVED ***/
#define SMC37c669_DEVICE_IRQ_H ( SMC37c669_DEVICE_IRQ( 0x08 ) )
/*
** SMC 37c669 Device DMA Channel Definitions
*/
#define SMC37c669_DEVICE_DRQ_A ( SMC37c669_DEVICE_DRQ( 0x01 ) )
#define SMC37c669_DEVICE_DRQ_B ( SMC37c669_DEVICE_DRQ( 0x02 ) )
#define SMC37c669_DEVICE_DRQ_C ( SMC37c669_DEVICE_DRQ( 0x03 ) )
/*
** Configuration Register Index Definitions
*/
#define SMC37c669_CR00_INDEX 0x00
#define SMC37c669_CR01_INDEX 0x01
#define SMC37c669_CR02_INDEX 0x02
#define SMC37c669_CR03_INDEX 0x03
#define SMC37c669_CR04_INDEX 0x04
#define SMC37c669_CR05_INDEX 0x05
#define SMC37c669_CR06_INDEX 0x06
#define SMC37c669_CR07_INDEX 0x07
#define SMC37c669_CR08_INDEX 0x08
#define SMC37c669_CR09_INDEX 0x09
#define SMC37c669_CR0A_INDEX 0x0A
#define SMC37c669_CR0B_INDEX 0x0B
#define SMC37c669_CR0C_INDEX 0x0C
#define SMC37c669_CR0D_INDEX 0x0D
#define SMC37c669_CR0E_INDEX 0x0E
#define SMC37c669_CR0F_INDEX 0x0F
#define SMC37c669_CR10_INDEX 0x10
#define SMC37c669_CR11_INDEX 0x11
#define SMC37c669_CR12_INDEX 0x12
#define SMC37c669_CR13_INDEX 0x13
#define SMC37c669_CR14_INDEX 0x14
#define SMC37c669_CR15_INDEX 0x15
#define SMC37c669_CR16_INDEX 0x16
#define SMC37c669_CR17_INDEX 0x17
#define SMC37c669_CR18_INDEX 0x18
#define SMC37c669_CR19_INDEX 0x19
#define SMC37c669_CR1A_INDEX 0x1A
#define SMC37c669_CR1B_INDEX 0x1B
#define SMC37c669_CR1C_INDEX 0x1C
#define SMC37c669_CR1D_INDEX 0x1D
#define SMC37c669_CR1E_INDEX 0x1E
#define SMC37c669_CR1F_INDEX 0x1F
#define SMC37c669_CR20_INDEX 0x20
#define SMC37c669_CR21_INDEX 0x21
#define SMC37c669_CR22_INDEX 0x22
#define SMC37c669_CR23_INDEX 0x23
#define SMC37c669_CR24_INDEX 0x24
#define SMC37c669_CR25_INDEX 0x25
#define SMC37c669_CR26_INDEX 0x26
#define SMC37c669_CR27_INDEX 0x27
#define SMC37c669_CR28_INDEX 0x28
#define SMC37c669_CR29_INDEX 0x29
/*
** Configuration Register Alias Definitions
*/
#define SMC37c669_DEVICE_ID_INDEX SMC37c669_CR0D_INDEX
#define SMC37c669_DEVICE_REVISION_INDEX SMC37c669_CR0E_INDEX
#define SMC37c669_FDC_BASE_ADDRESS_INDEX SMC37c669_CR20_INDEX
#define SMC37c669_IDE_BASE_ADDRESS_INDEX SMC37c669_CR21_INDEX
#define SMC37c669_IDE_ALTERNATE_ADDRESS_INDEX SMC37c669_CR22_INDEX
#define SMC37c669_PARALLEL0_BASE_ADDRESS_INDEX SMC37c669_CR23_INDEX
#define SMC37c669_SERIAL0_BASE_ADDRESS_INDEX SMC37c669_CR24_INDEX
#define SMC37c669_SERIAL1_BASE_ADDRESS_INDEX SMC37c669_CR25_INDEX
#define SMC37c669_PARALLEL_FDC_DRQ_INDEX SMC37c669_CR26_INDEX
#define SMC37c669_PARALLEL_FDC_IRQ_INDEX SMC37c669_CR27_INDEX
#define SMC37c669_SERIAL_IRQ_INDEX SMC37c669_CR28_INDEX
/*
** Configuration Register Definitions
**
** The INDEX (write only) and DATA (read/write) ports are effective
** only when the chip is in the Configuration State.
*/
typedef struct _SMC37c669_CONFIG_REGS {
unsigned char index_port;
unsigned char data_port;
} SMC37c669_CONFIG_REGS;
/*
** CR00 - default value 0x28
**
** IDE_EN (CR00<1:0>):
** 0x - 30ua pull-ups on nIDEEN, nHDCS0, NHDCS1
** 11 - IRQ_H available as IRQ output,
** IRRX2, IRTX2 available as alternate IR pins
** 10 - nIDEEN, nHDCS0, nHDCS1 used to control IDE
**
** VALID (CR00<7>):
** A high level on this software controlled bit can
** be used to indicate that a valid configuration
** cycle has occurred. The control software must
** take care to set this bit at the appropriate times.
** Set to zero after power up. This bit has no
** effect on any other hardware in the chip.
**
*/
typedef union _SMC37c669_CR00 {
unsigned char as_uchar;
struct {
unsigned ide_en : 2; /* See note above */
unsigned reserved1 : 1; /* RAZ */
unsigned fdc_pwr : 1; /* 1 = supply power to FDC */
unsigned reserved2 : 3; /* Read as 010b */
unsigned valid : 1; /* See note above */
} by_field;
} SMC37c669_CR00;
/*
** CR01 - default value 0x9C
*/
typedef union _SMC37c669_CR01 {
unsigned char as_uchar;
struct {
unsigned reserved1 : 2; /* RAZ */
unsigned ppt_pwr : 1; /* 1 = supply power to PPT */
unsigned ppt_mode : 1; /* 1 = Printer mode, 0 = EPP */
unsigned reserved2 : 1; /* Read as 1 */
unsigned reserved3 : 2; /* RAZ */
unsigned lock_crx: 1; /* Lock CR00 - CR18 */
} by_field;
} SMC37c669_CR01;
/*
** CR02 - default value 0x88
*/
typedef union _SMC37c669_CR02 {
unsigned char as_uchar;
struct {
unsigned reserved1 : 3; /* RAZ */
unsigned uart1_pwr : 1; /* 1 = supply power to UART1 */
unsigned reserved2 : 3; /* RAZ */
unsigned uart2_pwr : 1; /* 1 = supply power to UART2 */
} by_field;
} SMC37c669_CR02;
/*
** CR03 - default value 0x78
**
** CR03<7> CR03<2> Pin 94
** ------- ------- ------
** 0 X DRV2 (input)
** 1 0 ADRX
** 1 1 IRQ_B
**
** CR03<6> CR03<5> Op Mode
** ------- ------- -------
** 0 0 Model 30
** 0 1 PS/2
** 1 0 Reserved
** 1 1 AT Mode
*/
typedef union _SMC37c669_CR03 {
unsigned char as_uchar;
struct {
unsigned pwrgd_gamecs : 1; /* 1 = PWRGD, 0 = GAMECS */
unsigned fdc_mode2 : 1; /* 1 = Enhanced Mode 2 */
unsigned pin94_0 : 1; /* See note above */
unsigned reserved1 : 1; /* RAZ */
unsigned drvden : 1; /* 1 = high, 0 - output */
unsigned op_mode : 2; /* See note above */
unsigned pin94_1 : 1; /* See note above */
} by_field;
} SMC37c669_CR03;
/*
** CR04 - default value 0x00
**
** PP_EXT_MODE:
** If CR01<PP_MODE> = 0 and PP_EXT_MODE =
** 00 - Standard and Bidirectional
** 01 - EPP mode and SPP
** 10 - ECP mode
** In this mode, 2 drives can be supported
** directly, 3 or 4 drives must use external
** 4 drive support. SPP can be selected
** through the ECR register of ECP as mode 000.
** 11 - ECP mode and EPP mode
** In this mode, 2 drives can be supported
** directly, 3 or 4 drives must use external
** 4 drive support. SPP can be selected
** through the ECR register of ECP as mode 000.
** In this mode, EPP can be selected through
** the ECR register of ECP as mode 100.
**
** PP_FDC:
** 00 - Normal
** 01 - PPFD1
** 10 - PPFD2
** 11 - Reserved
**
** MIDI1:
** Serial Clock Select:
** A low level on this bit disables MIDI support,
** clock = divide by 13. A high level on this
** bit enables MIDI support, clock = divide by 12.
**
** MIDI operates at 31.25 Kbps which can be derived
** from 125 KHz (24 MHz / 12 = 2 MHz, 2 MHz / 16 = 125 KHz)
**
** ALT_IO:
** 0 - Use pins IRRX, IRTX
** 1 - Use pins IRRX2, IRTX2
**
** If this bit is set, the IR receive and transmit
** functions will not be available on pins 25 and 26
** unless CR00<IDE_EN> = 11.
*/
typedef union _SMC37c669_CR04 {
unsigned char as_uchar;
struct {
unsigned ppt_ext_mode : 2; /* See note above */
unsigned ppt_fdc : 2; /* See note above */
unsigned midi1 : 1; /* See note above */
unsigned midi2 : 1; /* See note above */
unsigned epp_type : 1; /* 0 = EPP 1.9, 1 = EPP 1.7 */
unsigned alt_io : 1; /* See note above */
} by_field;
} SMC37c669_CR04;
/*
** CR05 - default value 0x00
**
** DEN_SEL:
** 00 - Densel output normal
** 01 - Reserved
** 10 - Densel output 1
** 11 - Densel output 0
**
*/
typedef union _SMC37c669_CR05 {
unsigned char as_uchar;
struct {
unsigned reserved1 : 2; /* RAZ */
unsigned fdc_dma_mode : 1; /* 0 = burst, 1 = non-burst */
unsigned den_sel : 2; /* See note above */
unsigned swap_drv : 1; /* Swap the FDC motor selects */
unsigned extx4 : 1; /* 0 = 2 drive, 1 = external 4 drive decode */
unsigned reserved2 : 1; /* RAZ */
} by_field;
} SMC37c669_CR05;
/*
** CR06 - default value 0xFF
*/
typedef union _SMC37c669_CR06 {
unsigned char as_uchar;
struct {
unsigned floppy_a : 2; /* Type of floppy drive A */
unsigned floppy_b : 2; /* Type of floppy drive B */
unsigned floppy_c : 2; /* Type of floppy drive C */
unsigned floppy_d : 2; /* Type of floppy drive D */
} by_field;
} SMC37c669_CR06;
/*
** CR07 - default value 0x00
**
** Auto Power Management CR07<7:4>:
** 0 - Auto Powerdown disabled (default)
** 1 - Auto Powerdown enabled
**
** This bit is reset to the default state by POR or
** a hardware reset.
**
*/
typedef union _SMC37c669_CR07 {
unsigned char as_uchar;
struct {
unsigned floppy_boot : 2; /* 0 = A:, 1 = B: */
unsigned reserved1 : 2; /* RAZ */
unsigned ppt_en : 1; /* See note above */
unsigned uart1_en : 1; /* See note above */
unsigned uart2_en : 1; /* See note above */
unsigned fdc_en : 1; /* See note above */
} by_field;
} SMC37c669_CR07;
/*
** CR08 - default value 0x00
*/
typedef union _SMC37c669_CR08 {
unsigned char as_uchar;
struct {
unsigned zero : 4; /* 0 */
unsigned addrx7_4 : 4; /* ADR<7:3> for ADRx decode */
} by_field;
} SMC37c669_CR08;
/*
** CR09 - default value 0x00
**
** ADRx_CONFIG:
** 00 - ADRx disabled
** 01 - 1 byte decode A<3:0> = 0000b
** 10 - 8 byte block decode A<3:0> = 0XXXb
** 11 - 16 byte block decode A<3:0> = XXXXb
**
*/
typedef union _SMC37c669_CR09 {
unsigned char as_uchar;
struct {
unsigned adra8 : 3; /* ADR<10:8> for ADRx decode */
unsigned reserved1 : 3;
unsigned adrx_config : 2; /* See note above */
} by_field;
} SMC37c669_CR09;
/*
** CR0A - default value 0x00
*/
typedef union _SMC37c669_CR0A {
unsigned char as_uchar;
struct {
unsigned ecp_fifo_threshold : 4;
unsigned reserved1 : 4;
} by_field;
} SMC37c669_CR0A;
/*
** CR0B - default value 0x00
*/
typedef union _SMC37c669_CR0B {
unsigned char as_uchar;
struct {
unsigned fdd0_drtx : 2; /* FDD0 Data Rate Table */
unsigned fdd1_drtx : 2; /* FDD1 Data Rate Table */
unsigned fdd2_drtx : 2; /* FDD2 Data Rate Table */
unsigned fdd3_drtx : 2; /* FDD3 Data Rate Table */
} by_field;
} SMC37c669_CR0B;
/*
** CR0C - default value 0x00
**
** UART2_MODE:
** 000 - Standard (default)
** 001 - IrDA (HPSIR)
** 010 - Amplitude Shift Keyed IR @500 KHz
** 011 - Reserved
** 1xx - Reserved
**
*/
typedef union _SMC37c669_CR0C {
unsigned char as_uchar;
struct {
unsigned uart2_rcv_polarity : 1; /* 1 = invert RX */
unsigned uart2_xmit_polarity : 1; /* 1 = invert TX */
unsigned uart2_duplex : 1; /* 1 = full, 0 = half */
unsigned uart2_mode : 3; /* See note above */
unsigned uart1_speed : 1; /* 1 = high speed enabled */
unsigned uart2_speed : 1; /* 1 = high speed enabled */
} by_field;
} SMC37c669_CR0C;
/*
** CR0D - default value 0x03
**
** Device ID Register - read only
*/
typedef union _SMC37c669_CR0D {
unsigned char as_uchar;
struct {
unsigned device_id : 8; /* Returns 0x3 in this field */
} by_field;
} SMC37c669_CR0D;
/*
** CR0E - default value 0x02
**
** Device Revision Register - read only
*/
typedef union _SMC37c669_CR0E {
unsigned char as_uchar;
struct {
unsigned device_rev : 8; /* Returns 0x2 in this field */
} by_field;
} SMC37c669_CR0E;
/*
** CR0F - default value 0x00
*/
typedef union _SMC37c669_CR0F {
unsigned char as_uchar;
struct {
unsigned test0 : 1; /* Reserved - set to 0 */
unsigned test1 : 1; /* Reserved - set to 0 */
unsigned test2 : 1; /* Reserved - set to 0 */
unsigned test3 : 1; /* Reserved - set t0 0 */
unsigned test4 : 1; /* Reserved - set to 0 */
unsigned test5 : 1; /* Reserved - set t0 0 */
unsigned test6 : 1; /* Reserved - set t0 0 */
unsigned test7 : 1; /* Reserved - set to 0 */
} by_field;
} SMC37c669_CR0F;
/*
** CR10 - default value 0x00
*/
typedef union _SMC37c669_CR10 {
unsigned char as_uchar;
struct {
unsigned reserved1 : 3; /* RAZ */
unsigned pll_gain : 1; /* 1 = 3V, 2 = 5V operation */
unsigned pll_stop : 1; /* 1 = stop PLLs */
unsigned ace_stop : 1; /* 1 = stop UART clocks */
unsigned pll_clock_ctrl : 1; /* 0 = 14.318 MHz, 1 = 24 MHz */
unsigned ir_test : 1; /* Enable IR test mode */
} by_field;
} SMC37c669_CR10;
/*
** CR11 - default value 0x00
*/
typedef union _SMC37c669_CR11 {
unsigned char as_uchar;
struct {
unsigned ir_loopback : 1; /* Internal IR loop back */
unsigned test_10ms : 1; /* Test 10ms autopowerdown FDC timeout */
unsigned reserved1 : 6; /* RAZ */
} by_field;
} SMC37c669_CR11;
/*
** CR12 - CR1D are reserved registers
*/
/*
** CR1E - default value 0x80
**
** GAMECS:
** 00 - GAMECS disabled
** 01 - 1 byte decode ADR<3:0> = 0001b
** 10 - 8 byte block decode ADR<3:0> = 0XXXb
** 11 - 16 byte block decode ADR<3:0> = XXXXb
**
*/
typedef union _SMC37c66_CR1E {
unsigned char as_uchar;
struct {
unsigned gamecs_config: 2; /* See note above */
unsigned gamecs_addr9_4 : 6; /* GAMECS Addr<9:4> */
} by_field;
} SMC37c669_CR1E;
/*
** CR1F - default value 0x00
**
** DT0 DT1 DRVDEN0 DRVDEN1 Drive Type
** --- --- ------- ------- ----------
** 0 0 DENSEL DRATE0 4/2/1 MB 3.5"
** 2/1 MB 5.25"
** 2/1.6/1 MB 3.5" (3-mode)
** 0 1 DRATE1 DRATE0
** 1 0 nDENSEL DRATE0 PS/2
** 1 1 DRATE0 DRATE1
**
** Note: DENSEL, DRATE1, and DRATE0 map onto two output
** pins - DRVDEN0 and DRVDEN1.
**
*/
typedef union _SMC37c669_CR1F {
unsigned char as_uchar;
struct {
unsigned fdd0_drive_type : 2; /* FDD0 drive type */
unsigned fdd1_drive_type : 2; /* FDD1 drive type */
unsigned fdd2_drive_type : 2; /* FDD2 drive type */
unsigned fdd3_drive_type : 2; /* FDD3 drive type */
} by_field;
} SMC37c669_CR1F;
/*
** CR20 - default value 0x3C
**
** FDC Base Address Register
** - To disable this decode set Addr<9:8> = 0
** - A<10> = 0, A<3:0> = 0XXXb to access.
**
*/
typedef union _SMC37c669_CR20 {
unsigned char as_uchar;
struct {
unsigned zero : 2; /* 0 */
unsigned addr9_4 : 6; /* FDC Addr<9:4> */
} by_field;
} SMC37c669_CR20;
/*
** CR21 - default value 0x3C
**
** IDE Base Address Register
** - To disable this decode set Addr<9:8> = 0
** - A<10> = 0, A<3:0> = 0XXXb to access.
**
*/
typedef union _SMC37c669_CR21 {
unsigned char as_uchar;
struct {
unsigned zero : 2; /* 0 */
unsigned addr9_4 : 6; /* IDE Addr<9:4> */
} by_field;
} SMC37c669_CR21;
/*
** CR22 - default value 0x3D
**
** IDE Alternate Status Base Address Register
** - To disable this decode set Addr<9:8> = 0
** - A<10> = 0, A<3:0> = 0110b to access.
**
*/
typedef union _SMC37c669_CR22 {
unsigned char as_uchar;
struct {
unsigned zero : 2; /* 0 */
unsigned addr9_4 : 6; /* IDE Alt Status Addr<9:4> */
} by_field;
} SMC37c669_CR22;
/*
** CR23 - default value 0x00
**
** Parallel Port Base Address Register
** - To disable this decode set Addr<9:8> = 0
** - A<10> = 0 to access.
** - If EPP is enabled, A<2:0> = XXXb to access.
** If EPP is NOT enabled, A<1:0> = XXb to access
**
*/
typedef union _SMC37c669_CR23 {
unsigned char as_uchar;
struct {
unsigned addr9_2 : 8; /* Parallel Port Addr<9:2> */
} by_field;
} SMC37c669_CR23;
/*
** CR24 - default value 0x00
**
** UART1 Base Address Register
** - To disable this decode set Addr<9:8> = 0
** - A<10> = 0, A<2:0> = XXXb to access.
**
*/
typedef union _SMC37c669_CR24 {
unsigned char as_uchar;
struct {
unsigned zero : 1; /* 0 */
unsigned addr9_3 : 7; /* UART1 Addr<9:3> */
} by_field;
} SMC37c669_CR24;
/*
** CR25 - default value 0x00
**
** UART2 Base Address Register
** - To disable this decode set Addr<9:8> = 0
** - A<10> = 0, A<2:0> = XXXb to access.
**
*/
typedef union _SMC37c669_CR25 {
unsigned char as_uchar;
struct {
unsigned zero : 1; /* 0 */
unsigned addr9_3 : 7; /* UART2 Addr<9:3> */
} by_field;
} SMC37c669_CR25;
/*
** CR26 - default value 0x00
**
** Parallel Port / FDC DMA Select Register
**
** D3 - D0 DMA
** D7 - D4 Selected
** ------- --------
** 0000 None
** 0001 DMA_A
** 0010 DMA_B
** 0011 DMA_C
**
*/
typedef union _SMC37c669_CR26 {
unsigned char as_uchar;
struct {
unsigned ppt_drq : 4; /* See note above */
unsigned fdc_drq : 4; /* See note above */
} by_field;
} SMC37c669_CR26;
/*
** CR27 - default value 0x00
**
** Parallel Port / FDC IRQ Select Register
**
** D3 - D0 IRQ
** D7 - D4 Selected
** ------- --------
** 0000 None
** 0001 IRQ_A
** 0010 IRQ_B
** 0011 IRQ_C
** 0100 IRQ_D
** 0101 IRQ_E
** 0110 IRQ_F
** 0111 Reserved
** 1000 IRQ_H
**
** Any unselected IRQ REQ is in tristate
**
*/
typedef union _SMC37c669_CR27 {
unsigned char as_uchar;
struct {
unsigned ppt_irq : 4; /* See note above */
unsigned fdc_irq : 4; /* See note above */
} by_field;
} SMC37c669_CR27;
/*
** CR28 - default value 0x00
**
** UART IRQ Select Register
**
** D3 - D0 IRQ
** D7 - D4 Selected
** ------- --------
** 0000 None
** 0001 IRQ_A
** 0010 IRQ_B
** 0011 IRQ_C
** 0100 IRQ_D
** 0101 IRQ_E
** 0110 IRQ_F
** 0111 Reserved
** 1000 IRQ_H
** 1111 share with UART1 (only for UART2)
**
** Any unselected IRQ REQ is in tristate
**
** To share an IRQ between UART1 and UART2, set
** UART1 to use the desired IRQ and set UART2 to
** 0xF to enable sharing mechanism.
**
*/
typedef union _SMC37c669_CR28 {
unsigned char as_uchar;
struct {
unsigned uart2_irq : 4; /* See note above */
unsigned uart1_irq : 4; /* See note above */
} by_field;
} SMC37c669_CR28;
/*
** CR29 - default value 0x00
**
** IRQIN IRQ Select Register
**
** D3 - D0 IRQ
** D7 - D4 Selected
** ------- --------
** 0000 None
** 0001 IRQ_A
** 0010 IRQ_B
** 0011 IRQ_C
** 0100 IRQ_D
** 0101 IRQ_E
** 0110 IRQ_F
** 0111 Reserved
** 1000 IRQ_H
**
** Any unselected IRQ REQ is in tristate
**
*/
typedef union _SMC37c669_CR29 {
unsigned char as_uchar;
struct {
unsigned irqin_irq : 4; /* See note above */
unsigned reserved1 : 4; /* RAZ */
} by_field;
} SMC37c669_CR29;
/*
** Aliases of Configuration Register formats (should match
** the set of index aliases).
**
** Note that CR24 and CR25 have the same format and are the
** base address registers for UART1 and UART2. Because of
** this we only define 1 alias here - for CR24 - as the serial
** base address register.
**
** Note that CR21 and CR22 have the same format and are the
** base address and alternate status address registers for
** the IDE controller. Because of this we only define 1 alias
** here - for CR21 - as the IDE address register.
**
*/
typedef SMC37c669_CR0D SMC37c669_DEVICE_ID_REGISTER;
typedef SMC37c669_CR0E SMC37c669_DEVICE_REVISION_REGISTER;
typedef SMC37c669_CR20 SMC37c669_FDC_BASE_ADDRESS_REGISTER;
typedef SMC37c669_CR21 SMC37c669_IDE_ADDRESS_REGISTER;
typedef SMC37c669_CR23 SMC37c669_PARALLEL_BASE_ADDRESS_REGISTER;
typedef SMC37c669_CR24 SMC37c669_SERIAL_BASE_ADDRESS_REGISTER;
typedef SMC37c669_CR26 SMC37c669_PARALLEL_FDC_DRQ_REGISTER;
typedef SMC37c669_CR27 SMC37c669_PARALLEL_FDC_IRQ_REGISTER;
typedef SMC37c669_CR28 SMC37c669_SERIAL_IRQ_REGISTER;
/*
** ISA/Device IRQ Translation Table Entry Definition
*/
typedef struct _SMC37c669_IRQ_TRANSLATION_ENTRY {
int device_irq;
int isa_irq;
} SMC37c669_IRQ_TRANSLATION_ENTRY;
/*
** ISA/Device DMA Translation Table Entry Definition
*/
typedef struct _SMC37c669_DRQ_TRANSLATION_ENTRY {
int device_drq;
int isa_drq;
} SMC37c669_DRQ_TRANSLATION_ENTRY;
/*
** External Interface Function Prototype Declarations
*/
SMC37c669_CONFIG_REGS *SMC37c669_detect(
int
);
unsigned int SMC37c669_enable_device(
unsigned int func
);
unsigned int SMC37c669_disable_device(
unsigned int func
);
unsigned int SMC37c669_configure_device(
unsigned int func,
int port,
int irq,
int drq
);
void SMC37c669_display_device_info(
void
);
#endif /* __SMC37c669_H */
/* file: smcc669.c
*
* Copyright (C) 1997 by
* Digital Equipment Corporation, Maynard, Massachusetts.
* All rights reserved.
*
* This software is furnished under a license and may be used and copied
* only in accordance of the terms of such license and with the
* inclusion of the above copyright notice. This software or any other
* copies thereof may not be provided or otherwise made available to any
* other person. No title to and ownership of the software is hereby
* transferred.
*
* The information in this software is subject to change without notice
* and should not be construed as a commitment by digital equipment
* corporation.
*
* Digital assumes no responsibility for the use or reliability of its
* software on equipment which is not supplied by digital.
*/
/*
*++
* FACILITY:
*
* Alpha SRM Console Firmware
*
* MODULE DESCRIPTION:
*
* SMC37c669 Super I/O controller configuration routines.
*
* AUTHORS:
*
* Eric Rasmussen
*
* CREATION DATE:
*
* 28-Jan-1997
*
* MODIFICATION HISTORY:
*
* er 01-May-1997 Fixed pointer conversion errors in
* SMC37c669_get_device_config().
* er 28-Jan-1997 Initial version.
*
*--
*/
#if 0
/* $INCLUDE_OPTIONS$ */
#include "cp$inc:platform_io.h"
/* $INCLUDE_OPTIONS_END$ */
#include "cp$src:common.h"
#include "cp$inc:prototypes.h"
#include "cp$src:kernel_def.h"
#include "cp$src:msg_def.h"
#include "cp$src:smcc669_def.h"
/* Platform-specific includes */
#include "cp$src:platform.h"
#endif
#ifndef TRUE
#define TRUE 1
#endif
#ifndef FALSE
#define FALSE 0
#endif
#define wb( _x_, _y_ ) outb( _y_, (unsigned int)((unsigned long)_x_) )
#define rb( _x_ ) inb( (unsigned int)((unsigned long)_x_) )
/*
** Local storage for device configuration information.
**
** Since the SMC37c669 does not provide an explicit
** mechanism for enabling/disabling individual device
** functions, other than unmapping the device, local
** storage for device configuration information is
** allocated here for use in implementing our own
** function enable/disable scheme.
*/
static struct DEVICE_CONFIG {
unsigned int port1;
unsigned int port2;
int irq;
int drq;
} local_config [NUM_FUNCS];
/*
** List of all possible addresses for the Super I/O chip
*/
static unsigned long SMC37c669_Addresses[] __initdata =
{
0x3F0UL, /* Primary address */
0x370UL, /* Secondary address */
0UL /* End of list */
};
/*
** Global Pointer to the Super I/O device
*/
static SMC37c669_CONFIG_REGS *SMC37c669 __initdata = NULL;
/*
** IRQ Translation Table
**
** The IRQ translation table is a list of SMC37c669 device
** and standard ISA IRQs.
**
*/
static SMC37c669_IRQ_TRANSLATION_ENTRY *SMC37c669_irq_table __initdata;
/*
** The following definition is for the default IRQ
** translation table.
*/
static SMC37c669_IRQ_TRANSLATION_ENTRY SMC37c669_default_irq_table[]
__initdata =
{
{ SMC37c669_DEVICE_IRQ_A, -1 },
{ SMC37c669_DEVICE_IRQ_B, -1 },
{ SMC37c669_DEVICE_IRQ_C, 7 },
{ SMC37c669_DEVICE_IRQ_D, 6 },
{ SMC37c669_DEVICE_IRQ_E, 4 },
{ SMC37c669_DEVICE_IRQ_F, 3 },
{ SMC37c669_DEVICE_IRQ_H, -1 },
{ -1, -1 } /* End of table */
};
/*
** The following definition is for the MONET (XP1000) IRQ
** translation table.
*/
static SMC37c669_IRQ_TRANSLATION_ENTRY SMC37c669_monet_irq_table[]
__initdata =
{
{ SMC37c669_DEVICE_IRQ_A, -1 },
{ SMC37c669_DEVICE_IRQ_B, -1 },
{ SMC37c669_DEVICE_IRQ_C, 6 },
{ SMC37c669_DEVICE_IRQ_D, 7 },
{ SMC37c669_DEVICE_IRQ_E, 4 },
{ SMC37c669_DEVICE_IRQ_F, 3 },
{ SMC37c669_DEVICE_IRQ_H, -1 },
{ -1, -1 } /* End of table */
};
static SMC37c669_IRQ_TRANSLATION_ENTRY *SMC37c669_irq_tables[] __initdata =
{
SMC37c669_default_irq_table,
SMC37c669_monet_irq_table
};
/*
** DRQ Translation Table
**
** The DRQ translation table is a list of SMC37c669 device and
** ISA DMA channels.
**
*/
static SMC37c669_DRQ_TRANSLATION_ENTRY *SMC37c669_drq_table __initdata;
/*
** The following definition is the default DRQ
** translation table.
*/
static SMC37c669_DRQ_TRANSLATION_ENTRY SMC37c669_default_drq_table[]
__initdata =
{
{ SMC37c669_DEVICE_DRQ_A, 2 },
{ SMC37c669_DEVICE_DRQ_B, 3 },
{ SMC37c669_DEVICE_DRQ_C, -1 },
{ -1, -1 } /* End of table */
};
/*
** Local Function Prototype Declarations
*/
static unsigned int SMC37c669_is_device_enabled(
unsigned int func
);
#if 0
static unsigned int SMC37c669_get_device_config(
unsigned int func,
int *port,
int *irq,
int *drq
);
#endif
static void SMC37c669_config_mode(
unsigned int enable
);
static unsigned char SMC37c669_read_config(
unsigned char index
);
static void SMC37c669_write_config(
unsigned char index,
unsigned char data
);
static void SMC37c669_init_local_config( void );
static struct DEVICE_CONFIG *SMC37c669_get_config(
unsigned int func
);
static int SMC37c669_xlate_irq(
int irq
);
static int SMC37c669_xlate_drq(
int drq
);
static __cacheline_aligned DEFINE_SPINLOCK(smc_lock);
/*
**++
** FUNCTIONAL DESCRIPTION:
**
** This function detects the presence of an SMC37c669 Super I/O
** controller.
**
** FORMAL PARAMETERS:
**
** None
**
** RETURN VALUE:
**
** Returns a pointer to the device if found, otherwise,
** the NULL pointer is returned.
**
** SIDE EFFECTS:
**
** None
**
**--
*/
SMC37c669_CONFIG_REGS * __init SMC37c669_detect( int index )
{
int i;
SMC37c669_DEVICE_ID_REGISTER id;
for ( i = 0; SMC37c669_Addresses[i] != 0; i++ ) {
/*
** Initialize the device pointer even though we don't yet know if
** the controller is at this address. The support functions access
** the controller through this device pointer so we need to set it
** even when we are looking ...
*/
SMC37c669 = ( SMC37c669_CONFIG_REGS * )SMC37c669_Addresses[i];
/*
** Enter configuration mode
*/
SMC37c669_config_mode( TRUE );
/*
** Read the device id
*/
id.as_uchar = SMC37c669_read_config( SMC37c669_DEVICE_ID_INDEX );
/*
** Exit configuration mode
*/
SMC37c669_config_mode( FALSE );
/*
** Does the device id match? If so, assume we have found an
** SMC37c669 controller at this address.
*/
if ( id.by_field.device_id == SMC37c669_DEVICE_ID ) {
/*
** Initialize the IRQ and DRQ translation tables.
*/
SMC37c669_irq_table = SMC37c669_irq_tables[ index ];
SMC37c669_drq_table = SMC37c669_default_drq_table;
/*
** erfix
**
** If the platform can't use the IRQ and DRQ defaults set up in this
** file, it should call a platform-specific external routine at this
** point to reset the IRQ and DRQ translation table pointers to point
** at the appropriate tables for the platform. If the defaults are
** acceptable, then the external routine should do nothing.
*/
/*
** Put the chip back into configuration mode
*/
SMC37c669_config_mode( TRUE );
/*
** Initialize local storage for configuration information
*/
SMC37c669_init_local_config( );
/*
** Exit configuration mode
*/
SMC37c669_config_mode( FALSE );
/*
** SMC37c669 controller found, break out of search loop
*/
break;
}
else {
/*
** Otherwise, we did not find an SMC37c669 controller at this
** address so set the device pointer to NULL.
*/
SMC37c669 = NULL;
}
}
return SMC37c669;
}
/*
**++
** FUNCTIONAL DESCRIPTION:
**
** This function enables an SMC37c669 device function.
**
** FORMAL PARAMETERS:
**
** func:
** Which device function to enable
**
** RETURN VALUE:
**
** Returns TRUE is the device function was enabled, otherwise, FALSE
**
** SIDE EFFECTS:
**
** {@description or none@}
**
** DESIGN:
**
** Enabling a device function in the SMC37c669 controller involves
** setting all of its mappings (port, irq, drq ...). A local
** "shadow" copy of the device configuration is kept so we can
** just set each mapping to what the local copy says.
**
** This function ALWAYS updates the local shadow configuration of
** the device function being enabled, even if the device is always
** enabled. To avoid replication of code, functions such as
** configure_device set up the local copy and then call this
** function to the update the real device.
**
**--
*/
unsigned int __init SMC37c669_enable_device ( unsigned int func )
{
unsigned int ret_val = FALSE;
/*
** Put the device into configuration mode
*/
SMC37c669_config_mode( TRUE );
switch ( func ) {
case SERIAL_0:
{
SMC37c669_SERIAL_BASE_ADDRESS_REGISTER base_addr;
SMC37c669_SERIAL_IRQ_REGISTER irq;
/*
** Enable the serial 1 IRQ mapping
*/
irq.as_uchar =
SMC37c669_read_config( SMC37c669_SERIAL_IRQ_INDEX );
irq.by_field.uart1_irq =
SMC37c669_RAW_DEVICE_IRQ(
SMC37c669_xlate_irq( local_config[ func ].irq )
);
SMC37c669_write_config( SMC37c669_SERIAL_IRQ_INDEX, irq.as_uchar );
/*
** Enable the serial 1 port base address mapping
*/
base_addr.as_uchar = 0;
base_addr.by_field.addr9_3 = local_config[ func ].port1 >> 3;
SMC37c669_write_config(
SMC37c669_SERIAL0_BASE_ADDRESS_INDEX,
base_addr.as_uchar
);
ret_val = TRUE;
break;
}
case SERIAL_1:
{
SMC37c669_SERIAL_BASE_ADDRESS_REGISTER base_addr;
SMC37c669_SERIAL_IRQ_REGISTER irq;
/*
** Enable the serial 2 IRQ mapping
*/
irq.as_uchar =
SMC37c669_read_config( SMC37c669_SERIAL_IRQ_INDEX );
irq.by_field.uart2_irq =
SMC37c669_RAW_DEVICE_IRQ(
SMC37c669_xlate_irq( local_config[ func ].irq )
);
SMC37c669_write_config( SMC37c669_SERIAL_IRQ_INDEX, irq.as_uchar );
/*
** Enable the serial 2 port base address mapping
*/
base_addr.as_uchar = 0;
base_addr.by_field.addr9_3 = local_config[ func ].port1 >> 3;
SMC37c669_write_config(
SMC37c669_SERIAL1_BASE_ADDRESS_INDEX,
base_addr.as_uchar
);
ret_val = TRUE;
break;
}
case PARALLEL_0:
{
SMC37c669_PARALLEL_BASE_ADDRESS_REGISTER base_addr;
SMC37c669_PARALLEL_FDC_IRQ_REGISTER irq;
SMC37c669_PARALLEL_FDC_DRQ_REGISTER drq;
/*
** Enable the parallel port DMA channel mapping
*/
drq.as_uchar =
SMC37c669_read_config( SMC37c669_PARALLEL_FDC_DRQ_INDEX );
drq.by_field.ppt_drq =
SMC37c669_RAW_DEVICE_DRQ(
SMC37c669_xlate_drq( local_config[ func ].drq )
);
SMC37c669_write_config(
SMC37c669_PARALLEL_FDC_DRQ_INDEX,
drq.as_uchar
);
/*
** Enable the parallel port IRQ mapping
*/
irq.as_uchar =
SMC37c669_read_config( SMC37c669_PARALLEL_FDC_IRQ_INDEX );
irq.by_field.ppt_irq =
SMC37c669_RAW_DEVICE_IRQ(
SMC37c669_xlate_irq( local_config[ func ].irq )
);
SMC37c669_write_config(
SMC37c669_PARALLEL_FDC_IRQ_INDEX,
irq.as_uchar
);
/*
** Enable the parallel port base address mapping
*/
base_addr.as_uchar = 0;
base_addr.by_field.addr9_2 = local_config[ func ].port1 >> 2;
SMC37c669_write_config(
SMC37c669_PARALLEL0_BASE_ADDRESS_INDEX,
base_addr.as_uchar
);
ret_val = TRUE;
break;
}
case FLOPPY_0:
{
SMC37c669_FDC_BASE_ADDRESS_REGISTER base_addr;
SMC37c669_PARALLEL_FDC_IRQ_REGISTER irq;
SMC37c669_PARALLEL_FDC_DRQ_REGISTER drq;
/*
** Enable the floppy controller DMA channel mapping
*/
drq.as_uchar =
SMC37c669_read_config( SMC37c669_PARALLEL_FDC_DRQ_INDEX );
drq.by_field.fdc_drq =
SMC37c669_RAW_DEVICE_DRQ(
SMC37c669_xlate_drq( local_config[ func ].drq )
);
SMC37c669_write_config(
SMC37c669_PARALLEL_FDC_DRQ_INDEX,
drq.as_uchar
);
/*
** Enable the floppy controller IRQ mapping
*/
irq.as_uchar =
SMC37c669_read_config( SMC37c669_PARALLEL_FDC_IRQ_INDEX );
irq.by_field.fdc_irq =
SMC37c669_RAW_DEVICE_IRQ(
SMC37c669_xlate_irq( local_config[ func ].irq )
);
SMC37c669_write_config(
SMC37c669_PARALLEL_FDC_IRQ_INDEX,
irq.as_uchar
);
/*
** Enable the floppy controller base address mapping
*/
base_addr.as_uchar = 0;
base_addr.by_field.addr9_4 = local_config[ func ].port1 >> 4;
SMC37c669_write_config(
SMC37c669_FDC_BASE_ADDRESS_INDEX,
base_addr.as_uchar
);
ret_val = TRUE;
break;
}
case IDE_0:
{
SMC37c669_IDE_ADDRESS_REGISTER ide_addr;
/*
** Enable the IDE alternate status base address mapping
*/
ide_addr.as_uchar = 0;
ide_addr.by_field.addr9_4 = local_config[ func ].port2 >> 4;
SMC37c669_write_config(
SMC37c669_IDE_ALTERNATE_ADDRESS_INDEX,
ide_addr.as_uchar
);
/*
** Enable the IDE controller base address mapping
*/
ide_addr.as_uchar = 0;
ide_addr.by_field.addr9_4 = local_config[ func ].port1 >> 4;
SMC37c669_write_config(
SMC37c669_IDE_BASE_ADDRESS_INDEX,
ide_addr.as_uchar
);
ret_val = TRUE;
break;
}
}
/*
** Exit configuration mode and return
*/
SMC37c669_config_mode( FALSE );
return ret_val;
}
/*
**++
** FUNCTIONAL DESCRIPTION:
**
** This function disables a device function within the
** SMC37c669 Super I/O controller.
**
** FORMAL PARAMETERS:
**
** func:
** Which function to disable
**
** RETURN VALUE:
**
** Return TRUE if the device function was disabled, otherwise, FALSE
**
** SIDE EFFECTS:
**
** {@description or none@}
**
** DESIGN:
**
** Disabling a function in the SMC37c669 device involves
** disabling all the function's mappings (port, irq, drq ...).
** A shadow copy of the device configuration is maintained
** in local storage so we won't worry aboving saving the
** current configuration information.
**
**--
*/
unsigned int __init SMC37c669_disable_device ( unsigned int func )
{
unsigned int ret_val = FALSE;
/*
** Put the device into configuration mode
*/
SMC37c669_config_mode( TRUE );
switch ( func ) {
case SERIAL_0:
{
SMC37c669_SERIAL_BASE_ADDRESS_REGISTER base_addr;
SMC37c669_SERIAL_IRQ_REGISTER irq;
/*
** Disable the serial 1 IRQ mapping
*/
irq.as_uchar =
SMC37c669_read_config( SMC37c669_SERIAL_IRQ_INDEX );
irq.by_field.uart1_irq = 0;
SMC37c669_write_config( SMC37c669_SERIAL_IRQ_INDEX, irq.as_uchar );
/*
** Disable the serial 1 port base address mapping
*/
base_addr.as_uchar = 0;
SMC37c669_write_config(
SMC37c669_SERIAL0_BASE_ADDRESS_INDEX,
base_addr.as_uchar
);
ret_val = TRUE;
break;
}
case SERIAL_1:
{
SMC37c669_SERIAL_BASE_ADDRESS_REGISTER base_addr;
SMC37c669_SERIAL_IRQ_REGISTER irq;
/*
** Disable the serial 2 IRQ mapping
*/
irq.as_uchar =
SMC37c669_read_config( SMC37c669_SERIAL_IRQ_INDEX );
irq.by_field.uart2_irq = 0;
SMC37c669_write_config( SMC37c669_SERIAL_IRQ_INDEX, irq.as_uchar );
/*
** Disable the serial 2 port base address mapping
*/
base_addr.as_uchar = 0;
SMC37c669_write_config(
SMC37c669_SERIAL1_BASE_ADDRESS_INDEX,
base_addr.as_uchar
);
ret_val = TRUE;
break;
}
case PARALLEL_0:
{
SMC37c669_PARALLEL_BASE_ADDRESS_REGISTER base_addr;
SMC37c669_PARALLEL_FDC_IRQ_REGISTER irq;
SMC37c669_PARALLEL_FDC_DRQ_REGISTER drq;
/*
** Disable the parallel port DMA channel mapping
*/
drq.as_uchar =
SMC37c669_read_config( SMC37c669_PARALLEL_FDC_DRQ_INDEX );
drq.by_field.ppt_drq = 0;
SMC37c669_write_config(
SMC37c669_PARALLEL_FDC_DRQ_INDEX,
drq.as_uchar
);
/*
** Disable the parallel port IRQ mapping
*/
irq.as_uchar =
SMC37c669_read_config( SMC37c669_PARALLEL_FDC_IRQ_INDEX );
irq.by_field.ppt_irq = 0;
SMC37c669_write_config(
SMC37c669_PARALLEL_FDC_IRQ_INDEX,
irq.as_uchar
);
/*
** Disable the parallel port base address mapping
*/
base_addr.as_uchar = 0;
SMC37c669_write_config(
SMC37c669_PARALLEL0_BASE_ADDRESS_INDEX,
base_addr.as_uchar
);
ret_val = TRUE;
break;
}
case FLOPPY_0:
{
SMC37c669_FDC_BASE_ADDRESS_REGISTER base_addr;
SMC37c669_PARALLEL_FDC_IRQ_REGISTER irq;
SMC37c669_PARALLEL_FDC_DRQ_REGISTER drq;
/*
** Disable the floppy controller DMA channel mapping
*/
drq.as_uchar =
SMC37c669_read_config( SMC37c669_PARALLEL_FDC_DRQ_INDEX );
drq.by_field.fdc_drq = 0;
SMC37c669_write_config(
SMC37c669_PARALLEL_FDC_DRQ_INDEX,
drq.as_uchar
);
/*
** Disable the floppy controller IRQ mapping
*/
irq.as_uchar =
SMC37c669_read_config( SMC37c669_PARALLEL_FDC_IRQ_INDEX );
irq.by_field.fdc_irq = 0;
SMC37c669_write_config(
SMC37c669_PARALLEL_FDC_IRQ_INDEX,
irq.as_uchar
);
/*
** Disable the floppy controller base address mapping
*/
base_addr.as_uchar = 0;
SMC37c669_write_config(
SMC37c669_FDC_BASE_ADDRESS_INDEX,
base_addr.as_uchar
);
ret_val = TRUE;
break;
}
case IDE_0:
{
SMC37c669_IDE_ADDRESS_REGISTER ide_addr;
/*
** Disable the IDE alternate status base address mapping
*/
ide_addr.as_uchar = 0;
SMC37c669_write_config(
SMC37c669_IDE_ALTERNATE_ADDRESS_INDEX,
ide_addr.as_uchar
);
/*
** Disable the IDE controller base address mapping
*/
ide_addr.as_uchar = 0;
SMC37c669_write_config(
SMC37c669_IDE_BASE_ADDRESS_INDEX,
ide_addr.as_uchar
);
ret_val = TRUE;
break;
}
}
/*
** Exit configuration mode and return
*/
SMC37c669_config_mode( FALSE );
return ret_val;
}
/*
**++
** FUNCTIONAL DESCRIPTION:
**
** This function configures a device function within the
** SMC37c669 Super I/O controller.
**
** FORMAL PARAMETERS:
**
** func:
** Which device function
**
** port:
** I/O port for the function to use
**
** irq:
** IRQ for the device function to use
**
** drq:
** DMA channel for the device function to use
**
** RETURN VALUE:
**
** Returns TRUE if the device function was configured,
** otherwise, FALSE.
**
** SIDE EFFECTS:
**
** {@description or none@}
**
** DESIGN:
**
** If this function returns TRUE, the local shadow copy of
** the configuration is also updated. If the device function
** is currently disabled, only the local shadow copy is
** updated and the actual device function will be updated
** if/when it is enabled.
**
**--
*/
unsigned int __init SMC37c669_configure_device (
unsigned int func,
int port,
int irq,
int drq )
{
struct DEVICE_CONFIG *cp;
/*
** Check for a valid configuration
*/
if ( ( cp = SMC37c669_get_config ( func ) ) != NULL ) {
/*
** Configuration is valid, update the local shadow copy
*/
if ( ( drq & ~0xFF ) == 0 ) {
cp->drq = drq;
}
if ( ( irq & ~0xFF ) == 0 ) {
cp->irq = irq;
}
if ( ( port & ~0xFFFF ) == 0 ) {
cp->port1 = port;
}
/*
** If the device function is enabled, update the actual
** device configuration.
*/
if ( SMC37c669_is_device_enabled( func ) ) {
SMC37c669_enable_device( func );
}
return TRUE;
}
return FALSE;
}
/*
**++
** FUNCTIONAL DESCRIPTION:
**
** This function determines whether a device function
** within the SMC37c669 controller is enabled.
**
** FORMAL PARAMETERS:
**
** func:
** Which device function
**
** RETURN VALUE:
**
** Returns TRUE if the device function is enabled, otherwise, FALSE
**
** SIDE EFFECTS:
**
** {@description or none@}
**
** DESIGN:
**
** To check whether a device is enabled we will only look at
** the port base address mapping. According to the SMC37c669
** specification, all of the port base address mappings are
** disabled if the addr<9:8> (bits <7:6> of the register) are
** zero.
**
**--
*/
static unsigned int __init SMC37c669_is_device_enabled ( unsigned int func )
{
unsigned char base_addr = 0;
unsigned int dev_ok = FALSE;
unsigned int ret_val = FALSE;
/*
** Enter configuration mode
*/
SMC37c669_config_mode( TRUE );
switch ( func ) {
case SERIAL_0:
base_addr =
SMC37c669_read_config( SMC37c669_SERIAL0_BASE_ADDRESS_INDEX );
dev_ok = TRUE;
break;
case SERIAL_1:
base_addr =
SMC37c669_read_config( SMC37c669_SERIAL1_BASE_ADDRESS_INDEX );
dev_ok = TRUE;
break;
case PARALLEL_0:
base_addr =
SMC37c669_read_config( SMC37c669_PARALLEL0_BASE_ADDRESS_INDEX );
dev_ok = TRUE;
break;
case FLOPPY_0:
base_addr =
SMC37c669_read_config( SMC37c669_FDC_BASE_ADDRESS_INDEX );
dev_ok = TRUE;
break;
case IDE_0:
base_addr =
SMC37c669_read_config( SMC37c669_IDE_BASE_ADDRESS_INDEX );
dev_ok = TRUE;
break;
}
/*
** If we have a valid device, check base_addr<7:6> to see if the
** device is enabled (mapped).
*/
if ( ( dev_ok ) && ( ( base_addr & 0xC0 ) != 0 ) ) {
/*
** The mapping is not disabled, so assume that the function is
** enabled.
*/
ret_val = TRUE;
}
/*
** Exit configuration mode
*/
SMC37c669_config_mode( FALSE );
return ret_val;
}
#if 0
/*
**++
** FUNCTIONAL DESCRIPTION:
**
** This function retrieves the configuration information of a
** device function within the SMC37c699 Super I/O controller.
**
** FORMAL PARAMETERS:
**
** func:
** Which device function
**
** port:
** I/O port returned
**
** irq:
** IRQ returned
**
** drq:
** DMA channel returned
**
** RETURN VALUE:
**
** Returns TRUE if the device configuration was successfully
** retrieved, otherwise, FALSE.
**
** SIDE EFFECTS:
**
** The data pointed to by the port, irq, and drq parameters
** my be modified even if the configuration is not successfully
** retrieved.
**
** DESIGN:
**
** The device configuration is fetched from the local shadow
** copy. Any unused parameters will be set to -1. Any
** parameter which is not desired can specify the NULL
** pointer.
**
**--
*/
static unsigned int __init SMC37c669_get_device_config (
unsigned int func,
int *port,
int *irq,
int *drq )
{
struct DEVICE_CONFIG *cp;
unsigned int ret_val = FALSE;
/*
** Check for a valid device configuration
*/
if ( ( cp = SMC37c669_get_config( func ) ) != NULL ) {
if ( drq != NULL ) {
*drq = cp->drq;
ret_val = TRUE;
}
if ( irq != NULL ) {
*irq = cp->irq;
ret_val = TRUE;
}
if ( port != NULL ) {
*port = cp->port1;
ret_val = TRUE;
}
}
return ret_val;
}
#endif
/*
**++
** FUNCTIONAL DESCRIPTION:
**
** This function displays the current state of the SMC37c699
** Super I/O controller's device functions.
**
** FORMAL PARAMETERS:
**
** None
**
** RETURN VALUE:
**
** None
**
** SIDE EFFECTS:
**
** None
**
**--
*/
void __init SMC37c669_display_device_info ( void )
{
if ( SMC37c669_is_device_enabled( SERIAL_0 ) ) {
printk( " Serial 0: Enabled [ Port 0x%x, IRQ %d ]\n",
local_config[ SERIAL_0 ].port1,
local_config[ SERIAL_0 ].irq
);
}
else {
printk( " Serial 0: Disabled\n" );
}
if ( SMC37c669_is_device_enabled( SERIAL_1 ) ) {
printk( " Serial 1: Enabled [ Port 0x%x, IRQ %d ]\n",
local_config[ SERIAL_1 ].port1,
local_config[ SERIAL_1 ].irq
);
}
else {
printk( " Serial 1: Disabled\n" );
}
if ( SMC37c669_is_device_enabled( PARALLEL_0 ) ) {
printk( " Parallel: Enabled [ Port 0x%x, IRQ %d/%d ]\n",
local_config[ PARALLEL_0 ].port1,
local_config[ PARALLEL_0 ].irq,
local_config[ PARALLEL_0 ].drq
);
}
else {
printk( " Parallel: Disabled\n" );
}
if ( SMC37c669_is_device_enabled( FLOPPY_0 ) ) {
printk( " Floppy Ctrl: Enabled [ Port 0x%x, IRQ %d/%d ]\n",
local_config[ FLOPPY_0 ].port1,
local_config[ FLOPPY_0 ].irq,
local_config[ FLOPPY_0 ].drq
);
}
else {
printk( " Floppy Ctrl: Disabled\n" );
}
if ( SMC37c669_is_device_enabled( IDE_0 ) ) {
printk( " IDE 0: Enabled [ Port 0x%x, IRQ %d ]\n",
local_config[ IDE_0 ].port1,
local_config[ IDE_0 ].irq
);
}
else {
printk( " IDE 0: Disabled\n" );
}
}
/*
**++
** FUNCTIONAL DESCRIPTION:
**
** This function puts the SMC37c669 Super I/O controller into,
** and takes it out of, configuration mode.
**
** FORMAL PARAMETERS:
**
** enable:
** TRUE to enter configuration mode, FALSE to exit.
**
** RETURN VALUE:
**
** None
**
** SIDE EFFECTS:
**
** The SMC37c669 controller may be left in configuration mode.
**
**--
*/
static void __init SMC37c669_config_mode(
unsigned int enable )
{
if ( enable ) {
/*
** To enter configuration mode, two writes in succession to the index
** port are required. If a write to another address or port occurs
** between these two writes, the chip does not enter configuration
** mode. Therefore, a spinlock is placed around the two writes to
** guarantee that they complete uninterrupted.
*/
spin_lock(&smc_lock);
wb( &SMC37c669->index_port, SMC37c669_CONFIG_ON_KEY );
wb( &SMC37c669->index_port, SMC37c669_CONFIG_ON_KEY );
spin_unlock(&smc_lock);
}
else {
wb( &SMC37c669->index_port, SMC37c669_CONFIG_OFF_KEY );
}
}
/*
**++
** FUNCTIONAL DESCRIPTION:
**
** This function reads an SMC37c669 Super I/O controller
** configuration register. This function assumes that the
** device is already in configuration mode.
**
** FORMAL PARAMETERS:
**
** index:
** Index value of configuration register to read
**
** RETURN VALUE:
**
** Data read from configuration register
**
** SIDE EFFECTS:
**
** None
**
**--
*/
static unsigned char __init SMC37c669_read_config(
unsigned char index )
{
unsigned char data;
wb( &SMC37c669->index_port, index );
data = rb( &SMC37c669->data_port );
return data;
}
/*
**++
** FUNCTIONAL DESCRIPTION:
**
** This function writes an SMC37c669 Super I/O controller
** configuration register. This function assumes that the
** device is already in configuration mode.
**
** FORMAL PARAMETERS:
**
** index:
** Index of configuration register to write
**
** data:
** Data to be written
**
** RETURN VALUE:
**
** None
**
** SIDE EFFECTS:
**
** None
**
**--
*/
static void __init SMC37c669_write_config(
unsigned char index,
unsigned char data )
{
wb( &SMC37c669->index_port, index );
wb( &SMC37c669->data_port, data );
}
/*
**++
** FUNCTIONAL DESCRIPTION:
**
** This function initializes the local device
** configuration storage. This function assumes
** that the device is already in configuration
** mode.
**
** FORMAL PARAMETERS:
**
** None
**
** RETURN VALUE:
**
** None
**
** SIDE EFFECTS:
**
** Local storage for device configuration information
** is initialized.
**
**--
*/
static void __init SMC37c669_init_local_config ( void )
{
SMC37c669_SERIAL_BASE_ADDRESS_REGISTER uart_base;
SMC37c669_SERIAL_IRQ_REGISTER uart_irqs;
SMC37c669_PARALLEL_BASE_ADDRESS_REGISTER ppt_base;
SMC37c669_PARALLEL_FDC_IRQ_REGISTER ppt_fdc_irqs;
SMC37c669_PARALLEL_FDC_DRQ_REGISTER ppt_fdc_drqs;
SMC37c669_FDC_BASE_ADDRESS_REGISTER fdc_base;
SMC37c669_IDE_ADDRESS_REGISTER ide_base;
SMC37c669_IDE_ADDRESS_REGISTER ide_alt;
/*
** Get serial port 1 base address
*/
uart_base.as_uchar =
SMC37c669_read_config( SMC37c669_SERIAL0_BASE_ADDRESS_INDEX );
/*
** Get IRQs for serial ports 1 & 2
*/
uart_irqs.as_uchar =
SMC37c669_read_config( SMC37c669_SERIAL_IRQ_INDEX );
/*
** Store local configuration information for serial port 1
*/
local_config[SERIAL_0].port1 = uart_base.by_field.addr9_3 << 3;
local_config[SERIAL_0].irq =
SMC37c669_xlate_irq(
SMC37c669_DEVICE_IRQ( uart_irqs.by_field.uart1_irq )
);
/*
** Get serial port 2 base address
*/
uart_base.as_uchar =
SMC37c669_read_config( SMC37c669_SERIAL1_BASE_ADDRESS_INDEX );
/*
** Store local configuration information for serial port 2
*/
local_config[SERIAL_1].port1 = uart_base.by_field.addr9_3 << 3;
local_config[SERIAL_1].irq =
SMC37c669_xlate_irq(
SMC37c669_DEVICE_IRQ( uart_irqs.by_field.uart2_irq )
);
/*
** Get parallel port base address
*/
ppt_base.as_uchar =
SMC37c669_read_config( SMC37c669_PARALLEL0_BASE_ADDRESS_INDEX );
/*
** Get IRQs for parallel port and floppy controller
*/
ppt_fdc_irqs.as_uchar =
SMC37c669_read_config( SMC37c669_PARALLEL_FDC_IRQ_INDEX );
/*
** Get DRQs for parallel port and floppy controller
*/
ppt_fdc_drqs.as_uchar =
SMC37c669_read_config( SMC37c669_PARALLEL_FDC_DRQ_INDEX );
/*
** Store local configuration information for parallel port
*/
local_config[PARALLEL_0].port1 = ppt_base.by_field.addr9_2 << 2;
local_config[PARALLEL_0].irq =
SMC37c669_xlate_irq(
SMC37c669_DEVICE_IRQ( ppt_fdc_irqs.by_field.ppt_irq )
);
local_config[PARALLEL_0].drq =
SMC37c669_xlate_drq(
SMC37c669_DEVICE_DRQ( ppt_fdc_drqs.by_field.ppt_drq )
);
/*
** Get floppy controller base address
*/
fdc_base.as_uchar =
SMC37c669_read_config( SMC37c669_FDC_BASE_ADDRESS_INDEX );
/*
** Store local configuration information for floppy controller
*/
local_config[FLOPPY_0].port1 = fdc_base.by_field.addr9_4 << 4;
local_config[FLOPPY_0].irq =
SMC37c669_xlate_irq(
SMC37c669_DEVICE_IRQ( ppt_fdc_irqs.by_field.fdc_irq )
);
local_config[FLOPPY_0].drq =
SMC37c669_xlate_drq(
SMC37c669_DEVICE_DRQ( ppt_fdc_drqs.by_field.fdc_drq )
);
/*
** Get IDE controller base address
*/
ide_base.as_uchar =
SMC37c669_read_config( SMC37c669_IDE_BASE_ADDRESS_INDEX );
/*
** Get IDE alternate status base address
*/
ide_alt.as_uchar =
SMC37c669_read_config( SMC37c669_IDE_ALTERNATE_ADDRESS_INDEX );
/*
** Store local configuration information for IDE controller
*/
local_config[IDE_0].port1 = ide_base.by_field.addr9_4 << 4;
local_config[IDE_0].port2 = ide_alt.by_field.addr9_4 << 4;
local_config[IDE_0].irq = 14;
}
/*
**++
** FUNCTIONAL DESCRIPTION:
**
** This function returns a pointer to the local shadow
** configuration of the requested device function.
**
** FORMAL PARAMETERS:
**
** func:
** Which device function
**
** RETURN VALUE:
**
** Returns a pointer to the DEVICE_CONFIG structure for the
** requested function, otherwise, NULL.
**
** SIDE EFFECTS:
**
** {@description or none@}
**
**--
*/
static struct DEVICE_CONFIG * __init SMC37c669_get_config( unsigned int func )
{
struct DEVICE_CONFIG *cp = NULL;
switch ( func ) {
case SERIAL_0:
cp = &local_config[ SERIAL_0 ];
break;
case SERIAL_1:
cp = &local_config[ SERIAL_1 ];
break;
case PARALLEL_0:
cp = &local_config[ PARALLEL_0 ];
break;
case FLOPPY_0:
cp = &local_config[ FLOPPY_0 ];
break;
case IDE_0:
cp = &local_config[ IDE_0 ];
break;
}
return cp;
}
/*
**++
** FUNCTIONAL DESCRIPTION:
**
** This function translates IRQs back and forth between ISA
** IRQs and SMC37c669 device IRQs.
**
** FORMAL PARAMETERS:
**
** irq:
** The IRQ to translate
**
** RETURN VALUE:
**
** Returns the translated IRQ, otherwise, returns -1.
**
** SIDE EFFECTS:
**
** {@description or none@}
**
**--
*/
static int __init SMC37c669_xlate_irq ( int irq )
{
int i, translated_irq = -1;
if ( SMC37c669_IS_DEVICE_IRQ( irq ) ) {
/*
** We are translating a device IRQ to an ISA IRQ
*/
for ( i = 0; ( SMC37c669_irq_table[i].device_irq != -1 ) || ( SMC37c669_irq_table[i].isa_irq != -1 ); i++ ) {
if ( irq == SMC37c669_irq_table[i].device_irq ) {
translated_irq = SMC37c669_irq_table[i].isa_irq;
break;
}
}
}
else {
/*
** We are translating an ISA IRQ to a device IRQ
*/
for ( i = 0; ( SMC37c669_irq_table[i].isa_irq != -1 ) || ( SMC37c669_irq_table[i].device_irq != -1 ); i++ ) {
if ( irq == SMC37c669_irq_table[i].isa_irq ) {
translated_irq = SMC37c669_irq_table[i].device_irq;
break;
}
}
}
return translated_irq;
}
/*
**++
** FUNCTIONAL DESCRIPTION:
**
** This function translates DMA channels back and forth between
** ISA DMA channels and SMC37c669 device DMA channels.
**
** FORMAL PARAMETERS:
**
** drq:
** The DMA channel to translate
**
** RETURN VALUE:
**
** Returns the translated DMA channel, otherwise, returns -1
**
** SIDE EFFECTS:
**
** {@description or none@}
**
**--
*/
static int __init SMC37c669_xlate_drq ( int drq )
{
int i, translated_drq = -1;
if ( SMC37c669_IS_DEVICE_DRQ( drq ) ) {
/*
** We are translating a device DMA channel to an ISA DMA channel
*/
for ( i = 0; ( SMC37c669_drq_table[i].device_drq != -1 ) || ( SMC37c669_drq_table[i].isa_drq != -1 ); i++ ) {
if ( drq == SMC37c669_drq_table[i].device_drq ) {
translated_drq = SMC37c669_drq_table[i].isa_drq;
break;
}
}
}
else {
/*
** We are translating an ISA DMA channel to a device DMA channel
*/
for ( i = 0; ( SMC37c669_drq_table[i].isa_drq != -1 ) || ( SMC37c669_drq_table[i].device_drq != -1 ); i++ ) {
if ( drq == SMC37c669_drq_table[i].isa_drq ) {
translated_drq = SMC37c669_drq_table[i].device_drq;
break;
}
}
}
return translated_drq;
}
#if 0
int __init smcc669_init ( void )
{
struct INODE *ip;
allocinode( smc_ddb.name, 1, &ip );
ip->dva = &smc_ddb;
ip->attr = ATTR$M_WRITE | ATTR$M_READ;
ip->len[0] = 0x30;
ip->misc = 0;
INODE_UNLOCK( ip );
return msg_success;
}
int __init smcc669_open( struct FILE *fp, char *info, char *next, char *mode )
{
struct INODE *ip;
/*
** Allow multiple readers but only one writer. ip->misc keeps track
** of the number of writers
*/
ip = fp->ip;
INODE_LOCK( ip );
if ( fp->mode & ATTR$M_WRITE ) {
if ( ip->misc ) {
INODE_UNLOCK( ip );
return msg_failure; /* too many writers */
}
ip->misc++;
}
/*
** Treat the information field as a byte offset
*/
*fp->offset = xtoi( info );
INODE_UNLOCK( ip );
return msg_success;
}
int __init smcc669_close( struct FILE *fp )
{
struct INODE *ip;
ip = fp->ip;
if ( fp->mode & ATTR$M_WRITE ) {
INODE_LOCK( ip );
ip->misc--;
INODE_UNLOCK( ip );
}
return msg_success;
}
int __init smcc669_read( struct FILE *fp, int size, int number, unsigned char *buf )
{
int i;
int length;
int nbytes;
struct INODE *ip;
/*
** Always access a byte at a time
*/
ip = fp->ip;
length = size * number;
nbytes = 0;
SMC37c669_config_mode( TRUE );
for ( i = 0; i < length; i++ ) {
if ( !inrange( *fp->offset, 0, ip->len[0] ) )
break;
*buf++ = SMC37c669_read_config( *fp->offset );
*fp->offset += 1;
nbytes++;
}
SMC37c669_config_mode( FALSE );
return nbytes;
}
int __init smcc669_write( struct FILE *fp, int size, int number, unsigned char *buf )
{
int i;
int length;
int nbytes;
struct INODE *ip;
/*
** Always access a byte at a time
*/
ip = fp->ip;
length = size * number;
nbytes = 0;
SMC37c669_config_mode( TRUE );
for ( i = 0; i < length; i++ ) {
if ( !inrange( *fp->offset, 0, ip->len[0] ) )
break;
SMC37c669_write_config( *fp->offset, *buf );
*fp->offset += 1;
buf++;
nbytes++;
}
SMC37c669_config_mode( FALSE );
return nbytes;
}
#endif
void __init
SMC37c669_dump_registers(void)
{
int i;
for (i = 0; i <= 0x29; i++)
printk("-- CR%02x : %02x\n", i, SMC37c669_read_config(i));
}
/*+
* ============================================================================
* = SMC_init - SMC37c669 Super I/O controller initialization =
* ============================================================================
*
* OVERVIEW:
*
* This routine configures and enables device functions on the
* SMC37c669 Super I/O controller.
*
* FORM OF CALL:
*
* SMC_init( );
*
* RETURNS:
*
* Nothing
*
* ARGUMENTS:
*
* None
*
* SIDE EFFECTS:
*
* None
*
*/
void __init SMC669_Init ( int index )
{
SMC37c669_CONFIG_REGS *SMC_base;
unsigned long flags;
local_irq_save(flags);
if ( ( SMC_base = SMC37c669_detect( index ) ) != NULL ) {
#if SMC_DEBUG
SMC37c669_config_mode( TRUE );
SMC37c669_dump_registers( );
SMC37c669_config_mode( FALSE );
SMC37c669_display_device_info( );
#endif
SMC37c669_disable_device( SERIAL_0 );
SMC37c669_configure_device(
SERIAL_0,
COM1_BASE,
COM1_IRQ,
-1
);
SMC37c669_enable_device( SERIAL_0 );
SMC37c669_disable_device( SERIAL_1 );
SMC37c669_configure_device(
SERIAL_1,
COM2_BASE,
COM2_IRQ,
-1
);
SMC37c669_enable_device( SERIAL_1 );
SMC37c669_disable_device( PARALLEL_0 );
SMC37c669_configure_device(
PARALLEL_0,
PARP_BASE,
PARP_IRQ,
PARP_DRQ
);
SMC37c669_enable_device( PARALLEL_0 );
SMC37c669_disable_device( FLOPPY_0 );
SMC37c669_configure_device(
FLOPPY_0,
FDC_BASE,
FDC_IRQ,
FDC_DRQ
);
SMC37c669_enable_device( FLOPPY_0 );
/* Wake up sometimes forgotten floppy, especially on DP264. */
outb(0xc, 0x3f2);
SMC37c669_disable_device( IDE_0 );
#if SMC_DEBUG
SMC37c669_config_mode( TRUE );
SMC37c669_dump_registers( );
SMC37c669_config_mode( FALSE );
SMC37c669_display_device_info( );
#endif
local_irq_restore(flags);
alpha: convert u64 to unsigned long long Convert alpha architecture to use u64 as unsigned long long. This is being done so that (a) all arches use u64 as unsigned long long and (b) printk of a u64 as %ll[ux] will not generate format warnings by gcc. The only gcc cross-compiler that I have is 4.0.2, which generates errors about miscompiling __weak references, so I have commented out that line in compiler-gcc4.h so that most of these compile, but more builds and real machine testing would be Real Good. [akpm@linux-foundation.org: fix warning] [akpm@linux-foundation.org: fix build] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> From: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-31 15:23:36 -07:00
printk( "SMC37c669 Super I/O Controller found @ 0x%p\n",
SMC_base );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
else {
local_irq_restore(flags);
#if SMC_DEBUG
printk( "No SMC37c669 Super I/O Controller found\n" );
#endif
}
}
Reference in a new issue Copy permalink