glider/fw/ptn3460.c
2024-04-27 21:32:58 -04:00

112 lines
3.4 KiB
C

//
// Copyright 2022 Wenting Zhang <zephray@outlook.com>
//
// Permission is hereby granted, free of charge, to any person obtaining a copy
// of this software and associated documentation files (the "Software"), to deal
// in the Software without restriction, including without limitation the rights
// to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
// copies of the Software, and to permit persons to whom the Software is
// furnished to do so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in
// all copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
// SOFTWARE.
//
#include <stdint.h>
#include <stdio.h>
#include "pico/stdlib.h"
#include "hardware/i2c.h"
#include "config.h"
#include "ptn3460.h"
#include "utils.h"
#include "edid.h"
#ifdef INPUT_PTN3460
#define PTN3460_I2C_ADDRESS (0x60)
#define PTN3460_I2C (i2c1)
#define PTN3460_HPD_PIN (7)
#define PTN3460_PDN_PIN (9)
#define PTN3460_VALID_PIN (4)
void ptn3460_select_edid_emulation(uint8_t id) {
uint8_t buf[2];
int result;
buf[0] = (uint8_t)0x84;
buf[1] = (uint8_t)0x01 | (id << 1);
result = i2c_write_blocking(PTN3460_I2C, PTN3460_I2C_ADDRESS,
buf, 2, false);
if (result != 2) {
fatal("Failed writing data to PTN3460\n");
}
}
void ptn3460_load_edid(uint8_t *edid) {
int result;
result = i2c_write_blocking(PTN3460_I2C, PTN3460_I2C_ADDRESS,
edid, 129, false);
if (result != 129) {
fatal("Failed writing data to PTN3460\n");
}
}
void ptn3460_write(uint8_t reg, uint8_t val) {
uint8_t buf[2];
int result;
buf[0] = reg;
buf[1] = val;
result = i2c_write_blocking(PTN3460_I2C, PTN3460_I2C_ADDRESS,
buf, 2, false);
if (result != 2) {
fatal("Failed writing data to PTN3460\n");
}
}
void ptn3460_init(void) {
gpio_init(PTN3460_HPD_PIN);
gpio_set_dir(PTN3460_HPD_PIN, GPIO_IN);
gpio_pull_down(PTN3460_HPD_PIN);
gpio_init(PTN3460_PDN_PIN);
gpio_put(PTN3460_PDN_PIN, 1);
gpio_set_dir(PTN3460_PDN_PIN, GPIO_OUT);
gpio_init(PTN3460_VALID_PIN);
gpio_set_dir(PTN3460_VALID_PIN, GPIO_IN);
gpio_pull_down(PTN3460_VALID_PIN);
sleep_ms(50);
// wait for HPD to become high
int ticks = 0;
while (gpio_get(PTN3460_HPD_PIN) != true) {
ticks ++;
if (ticks > 500) {
fatal("PTN3460 boot timeout\n");
}
sleep_ms(1);
}
printf("PTN3460 up after %d ms\n", ticks);
// Enable EDID emulation
ptn3460_select_edid_emulation(0);
ptn3460_load_edid(edid_get_raw());
ptn3460_write(0x81, 0x29); // 18bpp, clock on odd bus, dual channel
}
void ptn3460_set_aux_polarity(int reverse) {
if (reverse)
ptn3460_write(0x80, 0x02); // Enable AUX reverse
else
ptn3460_write(0x80, 0x00); // Disable AUX reverse
}
bool ptn3460_is_valid(void) {
return gpio_get(PTN3460_VALID_PIN);
}
#endif